Battery Disconnect

Written By: Spencer Day
  • Comments: 0
Battery Disconnect

Difficulty

Moderate

Steps

6

Time Required

No estimate

Introduction

This is a prerequisite-only guide! This guide is part of another procedure and isn't meant to be used alone.

  1. Za1p2bwEcvjMAEGC
    Za1p2bwEcvjMAEGC
    dil3KCVvVvVjqMAV

    • Completely power off and unplug your EliteBook before you start. Close the display and flip the entire laptop upside-down.

    • Use a Phillips screwdriver to loosen the five captive screws from the lower case.

  2. MxNeeZpjuZSkuiPa
    MxNeeZpjuZSkuiPa
    CO1baSu2WBhGQFke
    hUDmtX6xUX4cbdsp

    • Insert an opening pick between the lower case and the chassis along the hinge edge.

    • Slide the opening pick around the right corner and halfway up the side of the EliteBook to release the clips securing the lower case.

  3. Eix6cl4gGQRBVKaI
    Eix6cl4gGQRBVKaI
    LhO2ovMrMDqoGQmv
    oyJgkpLcKpveRPqY

    • Repeat the previous step on the left side of the case to release the clips.

  4. HsJKyoOhUZBlAKnj
    HsJKyoOhUZBlAKnj
    ntdvlGFVOWVvZ3mL
    EQuQDwNPR2FYEGhB

    • Lift the lower case up and away from the EliteBook and remove it.

  5. WR11UcMkAJXTDgoE
    WR11UcMkAJXTDgoE
    LPF6viYnQHrX1tdv
    OVtksYX3UZym5lwF

    • Move the pull tab that covers the battery connector out of the way.

    • You can use a piece of tape to hold the pull tab out of the way.

  6. Ydcer3mn5W4Dvbfv
    Ydcer3mn5W4Dvbfv
    Q3TOtnZiOQS5VARP
    KbG2WXI2cuD2aaT3

    • Use the pointed end of a spudger to push each side of the battery connector until it comes out of the socket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Spencer Day

Member since: 14/09/22

49372 Reputation

0 comments