Alcatel One Touch Evolve 2 LCD Screen Replacement

Written By: Akira Nakaza
  • Comments: 1
Alcatel One Touch Evolve 2 LCD Screen Replacement

Difficulty

Moderate

Steps

11

Time Required

20 minutes

Introduction

This guide will provide the necessary steps to replace the LCD screen from the Alcatel OneTouch Evolve 2.

  1. MVuKBSuMGBHQJZJD
    MVuKBSuMGBHQJZJD
    X1wlquZjfmySxyGH
    vQeRSSQJqRAACDO3

    • Turn off the phone before proceeding with disassembly to prevent shock and potential shorting of any electrical somponents.

    • Remove the back cover using one of the plastic opening tools and the slit in one of the corners.

    • Be gentle when prying so as to not wear out the tool.

  2. iMAEJPJd1HqlEvJA

    • Remove the battery using one of the plastic opening tools and the dome-shaped indent next to the battery face.

  3. AgR5g6YLpfqLYwlJ

    • Unscrew the four 4mm JIS screws in each corner using the J000 screwdriver head. Turn the screws counter-clockwise to loosen.

  4. MhYMQYYv1Q3XBoLR
    MhYMQYYv1Q3XBoLR
    P2OnEqWvcwxH1Wjc
    mAfiwmiL6HRuttO6

    • Insert a plastic or metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose.

  5. BUDABbXqTH2IKQkF
    BUDABbXqTH2IKQkF
    jhLtPpDfJOhxteoG

    • Pull the rear frame off with your hands.

  6. sm3pxO1AnhNFY3OT
    sm3pxO1AnhNFY3OT
    oEG3QWhZ3QHbLCcw

    • Use a plastic opening tool to pop the speaker press-fit connector free.

    • Slide the edge of the tool under the connector and gently lift up on the edge; the connector should pop free with little force.

  7. sUQquyg4LTasCLXv

    • Use a plastic opening tool to lift the front camera press-fit connector free.

  8. rft3lWwuMBckGuSD

    • Insert one of the plastic opening tools into any side of the main circuit board and gently pry it loose from the front cover. Repeat the process all around the circuit board.

  9. 55iPS2XqgMiq3Epp

    • Detach the main circuit board from the front cover.

  10. FbuJBJ3MeuYS3PSm

    • Gently pry off the digitizer from the main circuit board using a spudger

  11. QMTUiDjirQsFsf34
    QMTUiDjirQsFsf34
    Kgk4UMTRTToLLZ5N
    dXrnVgdCXgdUCGDj

    • Carefully separate the digitizer from circuit board.

    • Using your hands, gently remove the ribbon connecting the digitizer to the circuit board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Akira Nakaza

Member since: 08/11/17

427 Reputation

One comment

Merci de nous donner l’équivalant de numériseur d'écran tactile pour Alcatel One Touch Evolve 2 4037T,l’origine est obsolète.

salut

labadi.abdelmalek -