2008-2012 Honda Accord Headlight Bulb Replacement

Written By: Carson Nguyen
  • Comments: 0
2008-2012 Honda Accord Headlight Bulb Replacement

Difficulty

Moderate

Steps

6

Time Required

No estimate

Introduction

Headlights are a critical component to ensure safety on the road for both yourself and other drivers. Knowing how to replace your headlight can save you time and money if your headlight is either damaged or worn out.

  1. SvGgx1GFNXY16guD

    • (Right Side Headlight)

    • Turn the wheel all the way inward to have enough clearance.

    • Turn the vehicle fully off before proceeding to the next step.

  2. hfnovExbxVLgE1Dc
    hfnovExbxVLgE1Dc
    ZiODyTYlqQaNn3nF
    BSNAkDRfHq2fquUl

    • Locate the inner fender's retainer clips.

    • Using a flat-head screwdriver, pry out the retainer clips.

  3. NkAWdy6svSdeCuxW

    • Pry back the inner fender liner to gain access to the headlight bulb.

    • An object may be needed to keep the fender liner pulled back

  4. 3OmjQOASryMDmhBv
    3OmjQOASryMDmhBv
    PWUP2GnBi4Jgkvqd
    2IfvdVpmxKyODVRZ

    • Locate the headlight bulb, and turn the item clockwise so that it points towards the engine.

    • For the left bulb, turn the item counter clock-wise

  5. gxofSNQSayQpgBbq
    gxofSNQSayQpgBbq
    3NnbQayErY3bEGji

    • Pull out the headlight bulb from its socket.

    • Be careful while pulling the bulb out, you might damage the bulb or its connected cable.

  6. IM5pJftvYPvNTCqP
    IM5pJftvYPvNTCqP
    XpGpIIDI5WLEfBwj
    1NhlVIgxZTBBfHHZ

    • For a more visible view of this step since the space is small and cluttered. -Credit for these 3 pictures: @PrecisionLED

    • To disconnect the bulb, pinch the top of the white block to release it from the bulb

    • When installing a new bulb, be careful while handling the bulb to not smudge or damage the bulb.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Carson Nguyen

Member since: 23/10/23

133 Reputation

0 comments