5e SRD:Gaining a Level

This material is published under the OGL

Beyond 1st Level

As your character goes on adventures and overcomes challenges, he or she gains experience, represented by experience points. A character who reaches a specified experience point total advances in capability. This advancement is called gaining a level.

When your character gains a level, his or her class often grants additional features, as detailed in the class description. Some of these features allow you to increase your ability scores, either increasing two scores by 1 each or increasing one score by 2. You can't increase an ability score above 20. In addition, every character's proficiency bonus increases at certain levels.

Each time you gain a level, you gain 1 additional Hit Die. Roll that Hit Die, add your Constitution modifier to the roll, and add the total to your hit point maximum. Alternatively, you can use the fixed value shown in your class entry, which is the average result of the die roll (rounded up).

When your Constitution modifier increases by 1, your hit point maximum increases by 1 for each level you have attained. For example, if your 7th-level fighter has a Constitution score of 17, when he reaches 8th level, he increases his Constitution score from 17 to 18, thus increasing his Constitution modifier from +3 to +4. His hit point maximum then increases by 8.

The Character Advancement table summarizes the XP you need to advance in levels from level 1 through level 20, and the proficiency bonus for a character of that level. Consult the information in your character's class description to see what other improvements you gain at each level.

Character Advancement
Experience PointsLevelProficiency Bonus
01+2
3002+2
9003+2
2,7004+2
6,5005+3
14,0006+3
23,0007+3
34,0008+3
48,0009+4
64,00010+4
85,00011+4
100,00012+4
120,00013+5
140,00014+5
165,00015+5
195,00016+5
225,00017+6
265,00018+6
305,00019+6
355,00020+6

Multiclassing

Multiclassing allows you to gain levels in multiple classes. Doing so lets you mix the abilities of those classes to realize a character concept that might not be reflected in one of the standard class options.

With this rule, you have the option of gaining a level in a new class whenever you advance in level, instead of gaining a level in your current class. Your levels in all your classes are added together to determine your character level. For example, if you have three levels in wizard and two in fighter, you're a 5th-level character.

As you advance in levels, you might primarily remain a member of your original class with just a few levels in another class, or you might change course entirely, never looking back at the class you left behind. You might even start progressing in a third or fourth class. Compared to a single-class character of the same level, you'll sacrifice some focus in exchange for versatility.

Prerequisites

To qualify for a new class, you must meet the ability score prerequisites for both your current class and your new one, as shown in the Multiclassing Prerequisites table. For example, a barbarian who decides to multiclass into the druid class must have both Strength and Wisdom scores of 13 or higher. Without the full training that a beginning character receives, you must be a quick study in your new class, having a natural aptitude that is reflected by higher-than-average ability scores.

Multiclassing Prerequisites
ClassAbility Score Minimum
BarbarianStrength 13
BardCharisma 13
ClericWisdom 13
DruidWisdom 13
FighterStrength 13 or Dexterity 13
MonkDexterity 13 and Wisdom 13
PaladinStrength 13 and Charisma 13
RangerDexterity 13 and Wisdom 13
RogueDexterity 13
SorcererCharisma 13
WarlockCharisma 13
WizardIntelligence 13

Experience Points

The experience point cost to gain a level is always based on your total character level, as shown in the Character Advancement table, not your level in a particular class. So, if you are a cleric 6/fighter 1, you must gain enough XP to reach 8th level before you can take your second level as a fighter or your seventh level as a cleric.

Hit Points and Hit Dice

You gain the hit points from your new class as described for levels after 1st. You gain the 1st-level hit points for a class only when you are a 1st-level character.

You add together the Hit Dice granted by all your classes to form your pool of Hit Dice. If the Hit Dice are the same die type, you can simply pool them together. For example, both the fighter and the paladin have a d10, so if you are a paladin 5/fighter 5, you have ten d10 Hit Dice. If your classes give you Hit Dice of different types, keep track of them separately. If you are a paladin 5/cleric 5, for example, you have five d10 Hit Dice and five d8 Hit Dice.

Proficiency Bonus

Your proficiency bonus is always based on your total character level, as shown in the Character Advancement table, not your level in a particular class. For example, if you are a fighter 3/rogue 2, you have the proficiency bonus of a 5th-level character, which is +3.

Proficiencies

When you gain your first level in a class other than your initial class, you gain only some of new class's starting proficiencies, as shown in the Multiclassing Proficiencies table.

Multiclassing Proficiencies
ClassProficiencies Gained
BarbarianShields, simple weapons, martial weapons
BardLight armor, one skill of your choice, one musical instrument of your choice
ClericLight armor, medium armor, shields
DruidLight armor, medium armor, shields (druids will not wear armor or use shields made of metal)
FighterLight armor, medium armor, shields, simple weapons, martial weapons
MonkSimple weapons, shortsword
PaladinLight armor, medium armor, shields, simple weapons, martial weapons
RangerLight armor, medium armor, shields, simple weapons, martial weapons, one skill from the class's skill list
RogueLight armor, one skill from the class's skill list, thieves' tools
Sorcerer
WarlockLight armor, simple weapons
Wizard

Class Features

When you gain a new level in a class, you get its features for that level. You don't, however, receive the class's starting equipment, and a few features have additional rules when you're multiclassing: Channel Divinity, Extra Attack, Unarmored Defense, and Spellcasting.

Channel Divinity

If you already have the Channel Divinity feature and gain a level in a class that also grants the feature, you gain the Channel Divinity effects granted by that class, but getting the feature again doesn't give you an additional use of it. You gain additional uses only when you reach a class level that explicitly grants them to you. For example, if you are a cleric 6/paladin 4, you can use Channel Divinity twice between rests because you are high enough level in the cleric class to have more uses. Whenever you use the feature, you can choose any of the Channel Divinity effects available to you from your two classes.

Extra Attack

If you gain the Extra Attack class feature from more than one class, the features don't add together. You can't make more than two attacks with this feature unless it says you do (as the fighter's version of Extra Attack does). Similarly, the warlock's eldritch invocation Thirsting Blade doesn't give you additional attacks if you also have Extra Attack.

Unarmored Defense

If you already have the Unarmored Defense feature, you can't gain it again from another class.

Spellcasting

Your capacity for spellcasting depends partly on your combined levels in all your spellcasting classes and partly on your individual levels in those classes. Once you have the Spellcasting feature from more than one class, use the rules below. If you multiclass but have the Spellcasting feature from only one class, you follow the rules as described in that class.

Spells Known and Prepared. You determine what spells you know and can prepare for each class individually, as if you were a single-classed member of that class. If you are a ranger 4/wizard 3, for example, you know three 1st-level ranger spells based on your levels in the ranger class. As 3rd-level wizard, you know three wizard cantrips, and your spellbook contains ten wizard spells, two of which (the two you gained when you reached 3rd level as a wizard) can be 2nd-level spells. If your Intelligence is 16, you can prepare six wizard spells from your spellbook.

Each spell you know and prepare is associated with one of your classes, and you use the spellcasting ability of that class when you cast the spell. Similarly, a spellcasting focus, such as a holy symbol, can be used only for the spells from the class associated with that focus.

Spell Slots. You determine your available spell slots by adding together all your levels in the bard, cleric, druid, sorcerer, and wizard classes, and half your levels (rounded down) in the paladin and ranger classes. Use this total to determine your spell slots by consulting the Multiclass Spellcaster table.

If you have more than one spellcasting class, this table might give you spell slots of a level that is higher than the spells you know or can prepare. You can use those slots, but only to cast your lower-level spells. If a lower-level spell that you cast, like burning hands, has an enhanced effect when cast using a higher-level slot, you can use the enhanced effect, even though you don’t have any spells of that higher level.

For example, if you are the aforementioned ranger 4/wizard 3, you count as a 5th-level character when determining your spell slots: you have four 1st-level slots, three 2nd-level slots, and two 3rd-level slots. However, you don't know any 3rd-level spells, nor do you know any 2nd-level ranger spells. You can use the spell slots of those levels to cast the spells you do know—and potentially enhance their effects.

Pact Magic. If you have both the Spellcasting class feature and the Pact Magic class feature from the warlock class, you can use the spell slots you gain from the Pact Magic feature to cast spells you know or have prepared from classes with the Spellcasting class feature, and you can use the spell slots you gain from the Spellcasting class feature to cast warlock spells you know.


Multiclass Spellcaster:
Spell Slots per Spell Level
Lvl.1st2nd3rd4th5th6th7th8th9th
1st2
2nd3
3rd42
4th43
5th432
6th433
7th4331
8th4332
9th43331
10th43332
11th433321
12th433321
13th4333211
14th4333211
15th43332111
16th43332111
17th433321111
18th433331111
19th433332111
20th433332211



Back to Main Page 5e System Reference Document

Open Game Content (place problems on the discussion page).
This is part of the 5e System Reference Document. It is covered by the Open Game License v1.0a, rather than the GNU Free Documentation License 1.3. To distinguish it, these items will have this notice. If you see any page that contains SRD material and does not show this license statement, please contact an admin so that this license statement can be added. It is our intent to work within this license in good faith.
gollark: Oh dear. PotatOS auto update will fail.
gollark: It's *clearly* a tessellation of the hyperbolic plane.
gollark: We can be friends *if* you sign your soul over to me.
gollark: You can use the PIL Lua manual.
gollark: https://wiki.computercraft.cc/, the language is just Lua 5.1ish.
This article is issued from Dandwiki. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.