Draw the rainbow

Question

The challenge is simple: Draw a rainbow in as few bytes as possible

The specs for the rainbow are as follows:

• The figure must be exactly 400 pixels wide and 200 pixels high (optionally 401x201 if you want a single center pixel)
• The red ring should touch all borders of the figure (outer radius = 200 pixels)
• All rings shall have the same width (10 pixels)
  • The violet ring shall have an inner radius of 130 pixels
• The bow should be the upper half of a perfect circle
• The background shall be white (transparent is also accepted)
• The figure shall not have borders, (exception is made if the border can't be suppressed)
• Builtin rainbow making functions are not allowed!

The following colors are to be used in the rainbow:

This is code golf, so the shortest code in bytes win!

Example:

Related, but different!

Answer 1

MATL, 107 95 92 87 84 83 bytes

-200:200 0:200!PYyq10/k12-t8<*t0>*Q7B.561FTh.295Oh.51h4BPFTF6Bl.5hOh4B8$v255*k5M/YG

This works in current release (14.0.0) of the language/compiler.

EDIT (July 6, 2017): You can try it at MATL Online!.

To check that the colors are correct, remove the last five characters (you need to wait for a few seconds and scroll down to the end of the output).

Explanation

The code has three main steps:

Step 1: Generate a 201x401 matrix with numbers from 1 to 8. Pixels with value 1 are background (white), pixels with values 2, ..., 8 represent each band of the rainbow.

Horizontal coordinates range from -200 to 200 left to right, and vertical coordinates range from 0 to 200 bottom to top. So the origin (0,0) is bottom center, the upper left corner is (-200,200), etc.

The different bands of the rainbow are generated by computing the distance from each pixel to the origin and quantizing in steps of 10 pixels.

Step 2: Generate an 8x3 matrix defining the colormap. Each row is one of the necessary colors (white and the seven colors of the rainbow). Each value of the previous 201x401 matrix will be interpreted as an index to a row of this colormap.

We generate the colormap matrix using values between 0 and 1 for each color component, and then multiplying by 255 and rounding down. This way most values are initially 0 and 1, which will later become 0 and 255. Intermediate values are coded as values between 0 and 1 with 2 or 3 decimals, chosen so that when multiplied and rounded give the exact desired value.

Step 3: Display the image with that colormap.

               % STEP 1: CREATE MATRIX DEFINING THE RAINBOW BANDS
-200:200       % row vector [-200, -199, ..., 200]
0:200          % row vector [0, 1, ..., 200]
!P             % transpose and flip: convert into column vector [200; 199; ...; 0]
Yy             % hypotenuse function with broadcast: distance from each point to (0,0)
q10/k          % subtract 1, divide by 10, floor (round down). Gives 20 circular bands
               % 10 pixels wide, with values from 0 to 19
12-            % subtract 12
t8<*           % values larger than 7 are set to 0
t0>*           % values less than 0 are set to 0. We now have 7 bands with values
               % 1, ..., 7, and the white background with value 0
Q              % add 1: white becomes 1, bands become 2, ..., 8

               % STEP 2: CREATE MATRIX DEFINING THE COLORMAP
7B             % first row: [1 1 1] (7 converted to binary: color white)
.561FTh        % second row (light purple)
.295Oh.51h     % third row (dark purple)
4BP            % fourth row: [0 0 1] (4 converted to binary and flipped: blue)
FTF            % fifth row (green)
6B             % sixth row: [1 1 0] (6 converted to binary: yellow)
l.5hOh         % seventh row: orange
4B             % eigth row: [1 0 0] (4 converted to binary: red)
8$v            % vertically concatenate the 8 eight rows
255*k          % multiply by 255 and round down. Gives exact color values 
5M/            % push 255 again and divide. This is needed because colors in MATL are
               % defined between 0 and 1, not between 0 and 255

               % STEP 3: DISPLAY
YG             % display image with that colormap

Answer 2

Piet, 838 codels, several thousand pixels

Someone had to do it:

If you save this image you can try it online!

The actual Piet program is only the top ~125 pixels, which I created using a Python program I wrote.

Editing this afterwards really hurt my vision, I'll be tripping for days!

This outputs the image in an SVG format, because SVG really is (in my opinion) the simplest way to do this. I shamelessly stole Doorknob's SVG code. Outputs:

well, this really:

<svg viewBox='0 0 400 200'><circle cx='200' cy='200' r='200' fill='red'/><circle cx='200' cy='200' r='190' fill='#ff7f00'/><circle cx='200' cy='200' r='180' fill='yellow'/><circle cx='200' cy='200' r='170' fill='lime'/><circle cx='200' cy='200' r='160' fill='blue'/><circle cx='200' cy='200' r='150' fill='indigo'/><circle cx='200' cy='200' r='140' fill='#8f00ff'/><circle cx='200' cy='200' r='130' fill='white'/></svg>

Good luck beating this answer, non-Esolang users!

Answer 3

Pyth, 150 149 128 bytes

"<svg viewBox=0,0,400,200>"V8s["<circle cx=200 cy=200 r="-200*TN" fill="@c"red #ff7f00 #ff0 #0f0 #00f indigo #8f00ff #fff"dN" />

Outputs in SVG:

<svg viewBox=0,0,400,200>
<circle cx=200 cy=200 r=200 fill=red />
<circle cx=200 cy=200 r=190 fill=#ff7f00 />
<circle cx=200 cy=200 r=180 fill=#ff0 />
<circle cx=200 cy=200 r=170 fill=#0f0 />
<circle cx=200 cy=200 r=160 fill=#00f />
<circle cx=200 cy=200 r=150 fill=indigo />
<circle cx=200 cy=200 r=140 fill=#8f00ff />
<circle cx=200 cy=200 r=130 fill=#fff />

Thanks to @MamaFunRoll for 16 bytes and @PatrickRoberts for 6 more!

Answer 4

Minecraft 1.10 (almost), 2677 characters one-command, 868 blytes

Well I sure picked a verbose language.

summon FallingSand ~ ~1 ~ {Block:log,Time:1,Passengers:[{id:FallingSand,Block:redstone_block,Time:1,Passengers:[{id:FallingSand,Block:activator_rail,Time:1,Passengers:[{id:MinecartCommandBlock,Command:"summon ArmorStand ~ ~ ~ {Tags:[\"b\"]}"},{id:MinecartCommandBlock,Command:"summon Pig ~ ~ ~ {NoAI:1b}"},{id:MinecartCommandBlock,Command:setblock ~-1 ~-2 ~6 chain_command_block 3 replace {auto:1,Command:"execute @e[tag=b] ~ ~ ~ execute @e[rm=200] ~ ~ ~ tp @e[c=1] ~ -99 ~"}},{id:MinecartCommandBlock,Command:setblock ~-1 ~-2 ~5 chain_command_block 3 replace {auto:1,Command:"execute @e[tag=b] ~ ~ ~ execute @e[rm=190,r=200] ~ ~ ~ setblock ~ ~ ~ wool 14"}},{id:MinecartCommandBlock,Command:setblock ~-1 ~-2 ~4 chain_command_block 3 replace {auto:1,Command:"execute @e[tag=b] ~ ~ ~ execute @e[rm=180,r=190] ~ ~ ~ setblock ~ ~ ~ wool 1"}},{id:MinecartCommandBlock,Command:setblock ~ ~-2 ~4 chain_command_block 4 replace {auto:1,Command:"execute @e[tag=b] ~ ~ ~ execute @e[rm=170,r=180] ~ ~ ~ setblock ~ ~ ~ wool 4"}},{id:MinecartCommandBlock,Command:setblock ~ ~-2 ~5 chain_command_block 2 replace {auto:1,Command:"execute @e[tag=b] ~ ~ ~ execute @e[rm=160,r=170] ~ ~ ~ setblock ~ ~ ~ wool 13"}},{id:MinecartCommandBlock,Command:setblock ~ ~-2 ~6 chain_command_block 2 replace {auto:1,Command:"execute @e[tag=b] ~ ~ ~ execute @e[rm=150,r=160] ~ ~ ~ setblock ~ ~ ~ wool 11"}},{id:MinecartCommandBlock,Command:setblock ~ ~-2 ~7 chain_command_block 2 replace {auto:1,Command:"execute @e[tag=b] ~ ~ ~ execute @e[rm=140,r=150] ~ ~ ~ setblock ~ ~ ~ wool 10"}},{id:MinecartCommandBlock,Command:setblock ~ ~-2 ~8 chain_command_block 2 replace {auto:1,Command:"execute @e[tag=b] ~ ~ ~ execute @e[rm=130,r=140] ~ ~ ~ setblock ~ ~ ~ wool 2"}},{id:MinecartCommandBlock,Command:setblock ~1 ~-2 ~8 chain_command_block 4 replace {auto:1,Command:"tp @e[type=Cow] ~1 ~ ~"}},{id:MinecartCommandBlock,Command:setblock ~1 ~-2 ~7 chain_command_block 3 replace {auto:1,Command:"tp @e[type=Bat] ~-1 ~ ~"}},{id:MinecartCommandBlock,Command:setblock ~1 ~-2 ~6 chain_command_block 3 replace {auto:1,Command:"execute @e[type=Pig] ~ ~ ~ summon Bat ~ ~ ~ {NoAI:1b}"}},{id:MinecartCommandBlock,Command:setblock ~1 ~-2 ~5 chain_command_block 3 replace {auto:1,Command:"execute @e[type=Pig] ~ ~ ~ summon Cow ~ ~ ~ {NoAI:1b}"}},{id:MinecartCommandBlock,Command:setblock ~1 ~-2 ~4 repeating_command_block 3 replace {auto:1,Command:"tp @e[type=Pig] ~ ~1 ~"}},{id:MinecartCommandBlock,Command:setblock ~ ~ ~1 command_block 0 replace {Command:fill ~ ~-3 ~-1 ~ ~ ~ air}},{id:MinecartCommandBlock,Command:setblock ~ ~-1 ~1 redstone_block},{id:MinecartCommandBlock,Command:kill @e[type=MinecartCommandBlock,r=1]}]}]}]}

Make a new Superflat world, paste that mess into an Impulse command block, set your render distance fairly high, and run it. Break the armor stand when your computer stops lagging.

The result is 400 blocks across and 200 blocks tall, as requested.

I used MrGarretto's one command generator to pack everything together, and then modified the result of that a little bit to save a couple more bytes. Here's the input to it:

INIT:summon ArmorStand ~ ~ ~ {Tags:["b"]}
INIT:summon Pig ~ ~ ~ {NoAI:1b}
tp @e[type=Pig] ~ ~1 ~
execute @e[type=Pig] ~ ~ ~ summon Cow ~ ~ ~ {NoAI:1b}
execute @e[type=Pig] ~ ~ ~ summon Bat ~ ~ ~ {NoAI:1b}
tp @e[type=Bat] ~-1 ~ ~
tp @e[type=Cow] ~1 ~ ~
execute @e[tag=b] ~ ~ ~ execute @e[rm=130,r=140] ~ ~ ~ setblock ~ ~ ~ wool 2
execute @e[tag=b] ~ ~ ~ execute @e[rm=140,r=150] ~ ~ ~ setblock ~ ~ ~ wool 10
execute @e[tag=b] ~ ~ ~ execute @e[rm=150,r=160] ~ ~ ~ setblock ~ ~ ~ wool 11
execute @e[tag=b] ~ ~ ~ execute @e[rm=160,r=170] ~ ~ ~ setblock ~ ~ ~ wool 13
execute @e[tag=b] ~ ~ ~ execute @e[rm=170,r=180] ~ ~ ~ setblock ~ ~ ~ wool 4
execute @e[tag=b] ~ ~ ~ execute @e[rm=180,r=190] ~ ~ ~ setblock ~ ~ ~ wool 1
execute @e[tag=b] ~ ~ ~ execute @e[rm=190,r=200] ~ ~ ~ setblock ~ ~ ~ wool 14
execute @e[tag=b] ~ ~ ~ execute @e[rm=200] ~ ~ ~ tp @e[c=1] ~ -99 ~

That's a total of 15 1.9+ command blocks, and 838 bytes, so 15*2 + 838 = 868 blytes.

Here's the (almost) part, it's missing a corner and edge. It logically shouldn't - Minecraft bug? Would be exactly 400x200 blocks if it wasn't for that. Not much I can do.

Answer 5

Mathematica 152 144 126 bytes

Graphics@MapIndexed[{#,Disk[{0,0},4-#/5&@@#2,{Pi,0}]}&,RGBColor/@TextWords@"#f00 #ff7f00 #ff0 #0f0 #00f #4b0082 #8f00ff #fff"]

Thanks @CatsAreFluffy for shaving off 8 bytes & @njpipeorgan for a further 18 :)

Answer 6

vim, 165 142 139

i<svg viewBox=0,0,400,200><cr><circle cx=2<C-n> cy=2<C-n> r=2<C-n> fill=red<cr>#ff7f00<cr>#ff0<cr>#0f0<cr>#00f<cr>indigo<cr>#8f00ff<cr>#fff<esc>2Gqq0y4f=jPBB10<C-x>@qq@qV2G:norm A /><cr>

Yeesh, this is clunky. There's got to be improvements that can be made.

Outputs as SVG, like my Pyth answer.

Thanks to @MyHamDJ for shaving off 3 bytes!

Answer 7

HTML+SVG+ES6, 169

<svg width=400 viewBox=0,0,40,20 onload="this.innerHTML=`f00
ff7f00
ff0
0f0
00f
4b0082
8f00ff
fff`.replace(/.+/g,c=>`<circle cx=20 cy=20 r=${--r} fill=#${c} />`,r=21)"/>

Answer 8

Ruby with Shoes, 155 bytes

Shoes.app(width:400,height:200){background'fff'
8.times{|i|stroke fill %w{f00 ff7f00 ff0 0f0 00f 4b0082 8f00ff fff}[i]
oval left:i*=10,top:i,radius:200-i}}

Sample output:

Answer 9

JavaScript (ES6), 171 158 bytes

document.write`<svg width=400 height=200>${`f00
ff7f00
ff0
0f0
00f
4b0082
8f00ff
fff`.replace(/.+/g,c=>`<circle cx=200 cy=200 r=${i--}0 fill=#${c} />`,i=20)}`

Credit to @edc65 for the idea to convert

`[...].map((c,i)=>...)`

to

`...`.replace(/.+/g,c=>...,i=20)

It may look longer but the amount of bytes saved in compressing the array to a string is well worth the conversion. (It saves 13 bytes in this case)

Demo

document.write`<svg width=400 height=200>${`f00
ff7f00
ff0
0f0
00f
4b0082
8f00ff
fff`.replace(/.+/g,c=>`<circle cx=200 cy=200 r=${i--}0 fill=#${c} />`,i=20)}`

Answer 10

HTML (162) + CSS (146)

body{height:200px;width:400px}div{height:100%;box-sizing:border-box;border-radius:50% 50% 0 0/100% 100% 0 0;border:solid;border-width:10px 10px 0}

<div style=color:red><div style=color:#FF7F00><div style=color:#FF0><div style=color:#0F0><div style=color:#00F><div style=color:#4B0082><div style=color:#8F00FF>

---

HTML (224) + CSS (128)

body{height:200px;width:400px}div{height:100%;box-sizing:border-box;border-radius:50% 50% 0 0/100% 100% 0 0;padding:10px 10px 0}

<div style=background:red><div style=background:#FF7F00><div style=background:#FF0><div style=background:#0F0><div style=background:#00F><div style=background:#4B0082><div style=background:#8F00FF><div style=background:#FFF>

Answer 11

SpecBAS - 318 254 bytes

If we're drawing rainbows, then it seems like a good place to use the successor to ZX Spectrum BASIC.

1 p,k=20,x1=0,x2=400,y=200
2 FOR EACH s IN [16711680,16744192,16776960,65280,255,4915330,9371903]: PALETTE p,s: INC p: NEXT s
3 CLS 15: DRAW 0,200 TO 70,200: DRAW 330,200 TO 400,200
4 FOR i=1 TO 7
5 INK k: DRAW x1,y TO x2,y,-PI: DRAW x1+10,y TO x2-10,y,-PI: FILL x1+5,190
6 x1+=10,x2-=10,k+=1
7 NEXT i

Line 2 sets up the palette for the specific RGB values needed (and is probably not helping the byte count) as standard Spectrum colours didn't match up.

The DRAW command can take an extra parameter which makes it turn through a number of degrees radians between x1,y1 and x2,y2. Finally it finds a gap in the semicircles just drawn and flood fills with the current colour.

Answer 12

Tcl/Tk, 263 bytes

canvas .c -bg #FFF -bo 0 -highlightt 0;pack .c -e 1 -f both;wm ge . 400x200;foreach {r c} {200 #FF0000 190 #FF7F00 180 #FFFF00 170 #00FF00 160 #0000FF 150 #4B0082 140 #8F00FF 130 #FFF} {.c cr o -$r -$r $r $r -outline $c -f $c};after 100 {.c x s -5 u;.c y s -10 u}

Alas, this kind of question always favors some esoteric languages... That said, Tcl/Tk really makes graphics operations all of: easy, short, and readable.

That said, I've sacrificed readability to crunch options down to as few characters as possible. I don't imagine crunching the list of colors will help much compared to code to unpack it...

For comparison, here's the uncrunched code (380 bytes):

canvas .c -bg #FFF -borderwidth 0 -highlightthickness 0
pack .c -expand yes -fill both
wm geometry . 400x200
foreach {r c} {
  200 #FF0000 
  190 #FF7F00 
  180 #FFFF00 
  170 #00FF00 
  160 #0000FF 
  150 #4B0082 
  140 #8F00FF 
  130 #FFFFFF
} {
  .c create arc -$r -$r $r $r -extent 180 -outline $c -fill $c
}
after 100 {
  .c xview scroll -5 units
  .c yview scroll -10 units
}

The after command was unfortunately necessary since no scrolling (of the canvas's coordinate origin) can be done before the window is mapped to the screen.

Also, the crunched code actually draws a full rainbow (using a circle instead of an arc) and just relies on window clipping...

Anyway, I hope y'all enjoy. :O)

Answer 13

LaTeX, 290 bytes

\documentclass{proc}\input tikz\begin{document}\def\z#1!#2!#3!#4!{\definecolor{t}{rgb}{#1,#2,#3}\fill[color=t](200pt,0)circle(#4pt);}\tikz{\clip(0,0)rectangle(400pt,200pt);\z1!0!0!200!\z1!.5!0!190!\z1!1!0!180!\z0!1!0!170!\z0!0!1!160!\z.29!0!.51!150!\z.56!0!1!140!\z1!1!1!130!}\end{document}

Try it here.

Explanations

\documentclass{proc}
\input tikz
\begin{document}

    %Define macro "\z" with 4 arguments.         
    % The first 3 arguments are rgb values for the color
    % Last argument is the radius in pt that we draw a full circle with

    \def\z#1!#2!#3!#4!
        {\definecolor{t}{rgb}{#1,#2,#3}
         \fill[color=t](200pt,0)circle(#4pt);}

    % Start a Tikz figure

    \tikz{

        % We only draw the top half of the circle

        \clip(0,0)rectangle(400pt,200pt);

        % Draw each circle from biggest to smallest

        \z1!0!0!200!
        \z1!.5!0!190!
        \z1!1!0!180!
        \z0!1!0!170!
        \z0!0!1!160!
        \z.29!0!.51!150!
        \z.56!0!1!140!

        % Draw a white circle last

        \z1!1!1!130!
    }
\end{document}

Answer 14

JavaScript 271 251

c=document.body.appendChild(document.createElement('canvas'))
x=c.getContext('2d')
c.width=400
r=c.height=200
for(i=0;i<8;x.beginPath(),x.arc(r,r,r-i*10,0,7),x.fillStyle="#"+"FF0000FF7F00FFFF0000FF000000FF4B00828F00FFFFFFFF".substr(i++*6,6),x.fill());

Answer 15

Bubblegum, 139 119 bytes

Hexdump:

00000000: b329 2e4b 5728 cb4c 2d77 caaf b035 d031  .).KW(.L-w...5.1
00000010: d031 3130 d031 3230 b0e3 b249 ce2c 4ace  .110.120...I.,J.
00000020: 4955 48ae b005 f215 922b c154 1198 4ccb  IUH......+.T..L.
00000030: ccc9 b12d 4a4d 51d0 c7ad ced0 12aa 4e39  ...-JMQ.......N9
00000040: 2dcd 3c0d 2884 4fad 0542 2d7e 85e6 3085  -.<.(.O..B-~..0.
00000050: 0604 149a c115 1aa4 e155 680a 5598 9997  .........Uh.U...
00000060: 9299 9e8f 57a9 09cc 4c0b a07f d2f0 1b6b  ....W...L......k
00000070: 8cf0 1148 2100 0a                        ...H!..

Sadly, this is shorter than my Pyth answer. :(

Generates the same SVG file.

Answer 16

Java, 354 bytes

public void r() throws IOException{BufferedImage i=new BufferedImage(400,200,2);Graphics2D g=i.createGraphics();g.setStroke(new BasicStroke(10));int[]c={0xFF0000,0xFF7F00,0xFFFF00,0xFF00,255,0x4B0082,0x8F00FF};for(int v=0;v<7;v ++){g.setColor(new Color(c[v]));g.drawArc(v*10+5,v*10+5,390-v*20,390-v*20,0,360);}ImageIO.write(i,"PNG",new File("a.png"));}}

Just uses the Graphics2D class to draw 7 arcs, with an array to store the colors. I'm sure it can be improved further.

Ungolfed code:

public void ungolfed() throws IOException {
        BufferedImage i = new BufferedImage(400, 200, 2); // 2 is TYPE_INT_ARGB
        Graphics2D g = i.createGraphics();
        g.setStroke(new BasicStroke(10));
        int[] c = {0xFF0000, 0xFF7F00, 0xFFFF00, 0x00FF00, 0x0000FF, 0x4B0082, 0x8F00FF};
        for(int v = 0; v < 7; v ++) {
            g.setColor(new Color(c[v]));
            g.drawArc(v * 10 + 5, v * 10 + 5, 390 - v * 20, 390 - v * 20, 0, 360);
        }
        ImageIO.write(i, "PNG", new File("a.png"));
    }

Answer 17

CSS, 244 242 240 bytes

body{width:400px;height:200px;background-image:radial-gradient(500px at bottom,#FFF 26%,#8F00FF 26%,#8F00FF 28%,#4B0082 28%,#4B0082 30%,#00F 30%,#00F 32%,#0F0 32%,#0F0 34%,#FF0 34%,#FF0 36%,#FF7F00 36%,#FF7F00 38%,red 38%,red 40%,#FFF 40%)}

Edit: Saved 2 bytes by working around a bug in Chrome. Saved a further 2 bytes thanks to @TrangOul.

Note: the snippet uses a <div> due to limitations of Stack Snippets.

div {
    width: 400px;
    height: 200px;
    background-image: radial-gradient(500px at bottom,
        #FFF 26%,
        #8F00FF 26%, #8F00FF 28%,
        #4B0082 28%, #4B0082 30%,
        #00F 30%, #00F 32%,
        #0F0 32%, #0F0 34%,
        #FF0 34%, #FF0 36%,
        #FF7F00 36%, #FF7F00 38%,
        red 38%, red 40%,
        #FFF 40%);
}

<div>

Answer 18

C, 220 217 213 bytes

#define X printf("%c",s<169|s/401?y:s
i=8e4,t,y=255;main(s){for(puts("P6 400 200 255");i--;X/288?y:s<195?143:s<225?75:0),X<256|s/360?0:s/323?127:y),X<225&s/195?130:s<256?y:0))s=i/400,t=i%400-200,s=(s*s+t*t)/100;}

Output is PPM (the binary kind).

Edit: Saved a couple bytes thanks to @tucuxi.

Edit 2: Rearranged code to save even more.

Answer 19

Google Blockly, 48 blocks, 75 bytes

Click the gif below to navigate to the solution, where you can get a closer look at how it works.
As for an explanation, I think an image is worth a thousand words, and thus a gif is worth a thousand images.

link to big readable gif

Note: I'm unsure how to count in Blockly, so I counted every block as 1 byte, and every variable the regular way, so that 0 == 1 byte, 530 == 3 bytes, Arial == 5 bytes and bold == 4 bytes.
I counted the special character I used to cut off the rainbow as 2 bytes. Please report any mistakes or suggestions of the byte count in the comments

Answer 20

Postscript (87 bytes)

Hex dump:

00000000: 3188 0131 2030 2e35 3631 8800 3120 302e  1..1 0.561..1 0.
00000010: 3237 3888 0030 2e35 3188 0030 8801 3088  278..0.51..0..0.
00000020: 0130 8801 3188 0031 2030 2e35 8800 3188  .0..1..1 0.5..1.
00000030: 0030 87c8 0038 7b34 2031 9287 929d 87c8  .0...8{4 1......
00000040: 0030 2032 9258 3087 b400 9205 9216 9242  .0 2.X0........B
00000050: 880a 92a9 7d92 83                        ....}..

Output:

Answer 21

Processing, 196 186 181 179 169 163 bytes

int d=400,i=0;size(d,d/2);background(-1);int[]c={-65536,-33024,-256,#00ff00,#0000ff,#4b0082,#8f00ff,-1};for(noStroke();i<8;ellipse(200,200,d,d),d-=20)fill(c[i++]);

Saved 10 bytes thanks to Kritixi Lithos
... and another 6 bytes thanks to dzaima

Answer 22

HTML + CSS, 310 307 bytes

<b style=background:red><b style=background:#ff7f00><b style=background:#ff0><b style=background:lime><b style=background:blue><b style=background:indigo><b style=background:#8f00ff><b style=background:#fff;width:260px;height:130px><style>b{float:left;padding:10px 10px 0 10px;border-radius:300px 300px 0 0}

Super-duper invalid markup (may or may not look correct in your browser). Just wanted to see if it was even possible.

Answer 23

PHP, 285 bytes

<?php $a=imagecreate(400,200);define("b",255);$c=array(b,b,b,b,0,0,b,127,0,b,b,0,0,b,0,0,0,b,75,0,130,143,0,b,b,b,b);for($i=0;$i<9;$i++){imagefilledellipse($a,200,200,420-$i*20,420-$i*20,imagecolorallocate($a,$c[$i*3],$c[$i*3+1],$c[$i*3+2]));}header("Content-type:png");imagepng($a);?>

Outputs:

Answer 24

Bash + ImageMagick, 159 125 characters

eval convert -size 401x201 xc: '-fill \#'{f00,ff7f00,ff0,0f0,00f,4b0082,8f00ff,fff}' -draw "circle 200,200 200,$[i++*10]"' x:

Sample output:

Answer 25

Excel VBA, _{213 202 196 192} 172 Bytes

Code

Anonymous VBE immediate window function that takes no input and outputs a rainbow, as a vector image, to the sheets(1) object

For i=0To 7:j=400-20*i:Set s=Sheet1.Shapes.AddShape(20,10*i,10*i,j,j):s.Fill.ForeColor.RGB=Array(255,32767,65535,65280,-31*4^8,8519755,&HE1008F,-1)(i):s.Line.Visible=0:Next

Subroutine Version

Sub a
For i=0To 7
j=400-20*i
set s=Sheet1.Shapes.AddShape(20,10*i,10*i,j,j)
s.Fill.ForeColor.RGB=Array(255,32767,65535,65280,-31*4^8,8519755,&HE1008F,-1)(i)
s.Line.Visible=0
Next
End Sub

-11 bytes for removing .Adjustments(3)=3/80 call and adding a 8th, white arc

-6 bytes for using -1 over &HFFFFFF

-3 bytes for using Sheet1 over Sheets(1)

-6 bytes for converting with statement to set statement

-14 bytes for converting from Sub to anonymous VBE function

Output

Answer 26

R, 184 170 bytes

Making an image with fixed pixel dimensions turns out to be surprisingly tricky with R, whose plotting functions are mostly intended for statisticians. In particular R leaves extra space for labels and coordinate axes unless you explicitly set margins as zero-width by calling par.

On the other hand some of the required colours (specifically red, yellow and blue) are found in the default palette, and can be referenced simply by integer indices.

png(,400,200)
par(mar=0*1:4)
plot(as.raster(outer(199:0,-199.5:200,function(y,x)c(rep("white",13),"#8F00FF","#4B0082",4,"green",7,"#FF7F00",2)[1+(x^2+y^2)^.5%%200/10])))

Answer 27

Forth Salon Haiku (184 bytes)

I can't satisfy the dimension constraints with this format, but I thought it worth sharing anyway.

: ^ 2 ** ;
: b 0.9 * dup x .5 - ^ y 2.01 / ^
+ sqrt dup rot > swap rot .045
+ < * * + ;
0 .56 .2 b .29 .25 b 1 .4 b
1 .45 b 1 .5 b 0 1 .35 b 1 .4 b
0.5 .45 b 0 1 .2 b .51 .25 b
1 .3 b

Answer 28

LibreLogo, 129 bytes

Code:

x=307 ps 7 fc [3]for i in [[5],0xff7f00,[11],65280,255,4915330,9371903][ x-=14 pc i circle x ]ps 0 pc [3]rt 180 fd 152 square 300

Result:

Explanation:

x = 307                                                          ; Circle Width = 307 pt
ps 7                                                             ; Pen Size = 7 pt
fc [3]                                                           ; Fill Color = #ffffff
for i in [[5], 0xff7f00, [11], 65280, 255, 4915330, 9371903] [   ; For each Rainbow Color
    x -= 14                                                      ; Circle Width -= 14 pt
    pc i                                                         ; Pen Color = Rainbow Color
    circle x                                                     ; Draw Circle (Circle Width)
]
ps 0                                                             ; Pen Size = 0
pc [3]                                                           ; Pen Color = #ffffff
rt 180                                                           ; Right 180°
fd 152                                                           ; Forward 152 pt
square 300                                                       ; Draw Square (300 pt)

Answer 29

Perl, 175 + 1 = 176 bytes

perl -MSVG -E '$z=SVG->new(width=>4e2,height=>2e2);@x=qw/#fff #8f00ff indigo #00f #0f0 #ff0 #ff7f00 red/;$z->circle(cx=>200,cy=>200,r=>200-10*$a++,style=>{fill=>pop@x})for 1..8;say$z->xmlify'

Answer 30

DIV Games Studio (184 bytes)

Not the shortest but quite simple. Uses the DIV default palette

PROGRAM r;
local
c[]=22,26,235,41,54,82,249,15,15;
BEGIN
set_mode(400200);
for(x=-80;x<80;x+=10)
y=399-x;
draw(5,c[abs(x)/10],15,0,x,x,y,y);
x+=70*(x<0);END
LOOP;FRAME;END
END

Explanation

Define program start (named "r" to save space)

PROGRAM r;

setup palette lookup

local
c[]=22,26,235,41,54,82,249,15,15;

BEGIN program code

BEGIN

Set video mode to 400,200

set_mode(400200);

loop x (predefined variable) from -80 (which bg hack) to 80 ( 7 colours + white centre)

for(x=-80;x<80;x+=10)

define elipse constraints

y=399-x;

draw elipse - on the first iteration this draws a circle larger than the screen in full white (index -8)

draw(type (5=filled elipse), colour, opacity, x0,y0,x1,y1)

draw(5,c[abs(x)/10],15,0,x,x,y,y);

once first is done, bump x up to zero to start drawing red band

x+=70*(x<0);

end for loop

END

infinite loop, drawing screen.

LOOP;FRAME;END

end (matches BEGIN at top of program)

END

Answer 31

PHP, 190 bytes

imagefill($a=imagecreatetruecolor($r=400,200),0,0,$w=0xffffff);foreach([255<<16,0xff7f00,$w-255,65280,255,4915330,9371903,$w]as$i)imagefilledellipse($a,200,200,$r,20+$r-=20,$i);imagepng($a);

Run it like this:

php -r 'imagefill($a=imagecreatetruecolor($r=400,200),0,0,$w=0xffffff);foreach([255<<16,0xff7f00,$w-255,65280,255,4915330,9371903,$w]as$i)imagefilledellipse($a,200,200,$r,20+$r-=20,$i);imagepng($a);' | display

Also working in theory at 179 bytes (but the image looks a tad messed up, bad GD):

php -r '$r=410;imagesetthickness($a=imagecreatetruecolor(400,200),10);foreach([255<<16,0xff7f00,0xffff00,65280,255,4915330,9371903]as$i)imagearc($a,200,200,$r-=20,$r,1,0,$i);imagepng($a);' | display

Also not a perfect image, but much better than the above (and @166 bytes):

php -d error_reporting=30709 -r '$a=imagecreatetruecolor($r=400,200);foreach([255<<16,0xff7f00,0xffff00,65280,255,4915330,9371903]as$i)for(;++$$i<21;)imageellipse($a,200,200,$r,$r--,$i);imagepng($a);' | display