Very Secure FTP Daemon
vsftpd (Very Secure FTP Daemon) is a lightweight, stable and secure FTP server for UNIX-like systems.
Installation
Install vsftpd and start/enable the vsftpd.service daemon.
To use xinetd for monitoring and controlling vsftpd connections, see #Using xinetd.
Configuration
Most of the settings in vsftpd are done by editing the file /etc/vsftpd.conf. The file itself is well-documented, so this section only highlights some important changes you may want to modify. For all available options and documentation, see the vsftpd.conf(5) man page. Files are served by default from /srv/ftp.
Enable connections /etc/hosts.allow:
# Allow all connections vsftpd: ALL # IP address range vsftpd: 10.0.0.0/255.255.255.0
Enabling uploading
The WRITE_ENABLE flag must be set to YES in /etc/vsftpd.conf in order to allow changes to the filesystem, such as uploading:
write_enable=YES
Local user login
One must set the line local_enable in /etc/vsftpd.conf to YES in order to allow users in /etc/passwd to login:
local_enable=YES
Anonymous login
These lines controls whether anonymous users can login. By default, anonymous logins are enabled for download only from /srv/ftp:
You may also add e.g. the following options (see vsftpd.conf(5) for more):
Chroot jail
A chroot environment that prevents the user from leaving its home directory can be set up. To enable this, add the following lines to /etc/vsftpd.conf:
chroot_list_enable=YES chroot_list_file=/etc/vsftpd.chroot_list
The variable specifies the file which contains users that are jailed.
For a more restricted environment, specify the line:
chroot_local_user=YES
This will make local users jailed by default. In this case, the file specified by lists users that are not in a chroot jail.
Limiting user login
It is possible to prevent users from logging into the FTP server by adding two lines to /etc/vsftpd.conf:
userlist_enable=YES userlist_file=/etc/vsftpd.user_list
now specifies the file which lists users that are not able to login.
If you only want to allow certain users to login, add the line:
userlist_deny=NO
The file specified by will now contain users that are able to login.
Limiting connections
The data transfer rate, i.e. number of clients and connections per IP for local users can be limited by adding the information in /etc/vsftpd.conf:
local_max_rate=1000000 # Maximum data transfer rate in bytes per second max_clients=50 # Maximum number of clients that may be connected max_per_ip=2 # Maximum connections per IP
Using xinetd
Xinetd provides enhanced capabilities for monitoring and controlling connections. It is not necessary though for a basic good working vsftpd-server.
Installation of vsftpd will add a necessary service file, /etc/xinetd.d/vsftpd. By default services are disabled. Enable the ftp service:
service ftp
{
socket_type = stream
wait = no
user = root
server = /usr/bin/vsftpd
log_on_success += HOST DURATION
log_on_failure += HOST
disable = no
}
If you have set the vsftpd daemon to run in standalone mode make the following change in /etc/vsftpd.conf:
listen=NO
Otherwise connection will fail:
500 OOPS: could not bind listening IPv4 socket
Instead of starting the vsftpd daemon start and enable .
Using SSL/TLS to secure FTP
First, you need a X.509 SSL/TLS certificate to use TLS. If you do not have one, you can easily generate a self-signed certificate as follows:
# cd /etc/ssl/certs # openssl req -x509 -nodes -days 7300 -newkey rsa:2048 -keyout vsftpd.pem -out vsftpd.pem # chmod 600 vsftpd.pem
You will be asked questions about your company, etc. As your certificate is not a trusted one, it does not really matter what is filled in, it will just be used for encryption. To use a trusted certificate, you can get one from a certificate authority like Let's Encrypt.
Then, edit the configuration file:
Resolve hostname in passive mode
To override the IP address vsftpd advertises in passive mode by the hostname of your server and have it DNS resolved at startup, add the following two lines in /etc/vsftpd.conf:
pasv_addr_resolve=YES pasv_address=yourdomain.org
Port configurations
It may be necessary to adjust the default FTP listening port and the passive mode data ports:
- For FTP servers exposed to the web, to reduce the likelihood of the server being attacked, the listening port can be changed to something other than the standard port 21.
- To limit the passive mode ports to open ports, a range can be provided.
The ports can be defined in the configuration file as illustrated below:
Configuring iptables
Often the server running the FTP daemon is protected by an iptables firewall. To allow access to the FTP server the corresponding port needs to be opened using something like
# iptables -A INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT
This article will not provide any instruction on how to set up iptables but here is an example: Simple stateful firewall.
There are some kernel modules needed for proper FTP connection handling by iptables that should be referenced here. Among those especially nf_conntrack_ftp. It is needed as FTP uses the given listen_port (21 by default) for commands only; all the data transfer is done over different ports. These ports are chosen by the FTP daemon at random and for each session (also depending on whether active or passive mode is used). To tell iptables that packets on ports should be accepted, nf_conntrack_ftp is required. You can explicitly load the module at boot.
If the kernel >= 4.7 you either need to set net.netfilter.nf_conntrack_helper=1 via sysctl e.g.
# echo net.netfilter.nf_conntrack_helper=1 > /etc/sysctl.d/70-conntrack.conf
or use
# iptables -A PREROUTING -t raw -p tcp --dport 21 -j CT --helper ftp
Tips and tricks
PAM with virtual users
Since PAM no longer provides another easy method is to use . This section is however limited to explain how to configure a chroot environment and authentication by .
In this example we create the directory :
# mkdir /etc/vsftpd
One option to create and store user names and passwords is to use the Apache generator htpasswd:
# htpasswd -c /etc/vsftpd/.passwd
A problem with the above command is that vsftpd might not be able to read the generated MD5 hashed password. If running the same command with the -d switch, crypt() encryption, password become readable by vsftpd, but the downside of this is less security and a password limited to 8 characters. Openssl could be used to produce a MD5 based BSD password with algorithm 1:
# openssl passwd -1
Whatever solution the produced /etc/vsftpd/.passwd should look like this:
username1:hashed_password1 username2:hashed_password2 ...
Next you need to create a PAM service using and the generated /etc/vsftpd/.passwd file. In this example we create a PAM policy for vsftpd with the following content:
Now it is time to create a home for the virtual users. In the example /srv/ftp is decided to host data for virtual users, which also reflects the default directory structure of Arch. First create the general user virtual and make /srv/ftp its home:
# useradd -d /srv/ftp virtual
Make virtual the owner:
# chown virtual:virtual /srv/ftp
A basic /etc/vsftpd.conf with no private folders configured, which will default to the home folder of the virtual user:
# pointing to the correct PAM service file pam_service_name=vsftpd write_enable=YES hide_ids=YES listen=YES connect_from_port_20=YES anonymous_enable=NO local_enable=YES dirmessage_enable=YES xferlog_enable=YES chroot_local_user=YES guest_enable=YES guest_username=virtual virtual_use_local_privs=YES
Some parameters might not be necessary for your own setup. If you want the chroot environment to be writable you will need to add the following to the configuration file:
allow_writeable_chroot=YES
Otherwise vsftpd because of default security settings will complain if it detects that chroot is writable.
Start vsftpd.service.
You should now be able to login from a ftp-client with any of the users and passwords stored in /etc/vsftpd/.passwd.
Adding private folders for the virtual users
First create directories for users:
# mkdir /srv/ftp/user1 # mkdir /srv/ftp/user2 # chown virtual:virtual /srv/ftp/user?/
Then, add the following lines to /etc/vsftpd.conf:
local_root=/srv/ftp/$USER user_sub_token=$USER
Troubleshooting
vsftpd: refusing to run with writable root inside chroot()
As of vsftpd 2.3.5, the chroot directory that users are locked to must not be writable. This is in order to prevent a security vulnerabilty.
The safe way to allow upload is to keep chroot enabled, and configure your FTP directories.
local_root=/srv/ftp/user
# mkdir -p /srv/ftp/user/upload # chmod 550 /srv/ftp/user # chmod 750 /srv/ftp/user/upload
If you must:
You can put this into your /etc/vsftpd.conf to workaround this security enhancement (since vsftpd 3.0.0; from Fixing 500 OOPS: vsftpd: refusing to run with writable root inside chroot ()):
allow_writeable_chroot=YES
FileZilla Client: GnuTLS error -8 -15 -110 when connecting via SSL
vsftpd tries to display plain-text error messages in the SSL session. In order to debug this, temporarily disable encryption and you will see the correct error message.
vsftpd.service fails to run on boot
If you have enabled vsftpd.service and it fails to run on boot, edit it and make sure it is set to load after in the service file:
Passive mode replies with the local IP address to a remote connection
If vsftpd returns a local address to a remote connection, like:
227 Entering Passive Mode (192,168,0,19,192,27).
It may be that the FTP server is behind a NAT router and while some devices monitor FTP connections and dynamically replace the local IP address specification by the external IP address for packets containing the PASV response, some do not.
Indicate the external IP address in the vsftpd configuration using:
pasv_address=externalIPaddress
or alternatively:
pasv_addr_resolve=YES pasv_address=my.domain.name
In case internal connection is not possible after this change, one may need to run 2 vsftpd, one for internal and one for external connections.
ipv6 only fails with: 500 OOPS: run two copies of vsftpd for IPv4 and IPv6
you most likely have commented out the line
# When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. #listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! listen_ipv6=YES
instead of setting
# When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=NO
vsftpd connections fail on a machine using nis with: yp_bind_client_create_v2: RPC: Unable to send
as mentioned on the vsftpd faq page, "...built-in sandboxing uses network isolation on Linux. This may be interfering with any module that needs to use the network to perform operations or lookups"
add this undocumented line to your /etc/vsftpd.conf
isolate_network=NO
VSFTPD reset connect via LIST command
seccomp_sandbox=NO
into the vsftpd.conf file fixes this issue