Yeo (locomotive)

Yeo was one of three narrow gauge 2-6-2T steam locomotives built by Manning Wardle in 1898 for the Lynton and Barnstaple Railway. The other two locomotives were named Exe and Taw. Yeo, like all the locomotives on the L&B, was named after a local river with a three-letter name, in this case the River Yeo.[4]

Lynton & Barnstaple Railway Yeo
Yeo and train approaching Woody Bay in Southern livery
Type and origin
Power typeSteam
BuilderManning Wardle, Leeds[1]
Serial number1361
Build date1898[1]
Specifications
Configuration:
  Whyte2-6-2T[1]
Gauge1 ft 11 12 in (597 mm)[1]
Leading dia.2 ft 0 in (0.610 m)[1]
Driver dia.2 ft 9 in (0.838 m)[1]
Trailing dia.2 ft 0 in (0.610 m)[1]
WheelbaseCoupled: 6 ft 6 in (1.981 m)
Total: 17 ft 9 in (5.410 m)[1]
Length22 ft 4 in (6.81 m) over buffer beams[1]
Width6 ft 7 in (2.01 m)[1]
Height8 ft 11 in (2.72 m)[1]
Loco weight22.05 long tons (22.40 t; 24.70 short tons)[1]
Fuel typeCoal[1]
Firebox:
  Firegrate area
8.85 sq ft (0.822 m2)[1]
Heating surface383 sq ft (35.6 m2)[1]
CylindersTwo,[2] outside[3]
Cylinder size10.5 in × 16 in (267 mm × 406 mm)[1]
Valve gearJoy[1]
Career
Operators
NumbersL&B: Yeo,
SR: E759[2]
LocaleDevon, South West England
Last run29 September 1935[4]
ScrappedDecember 1935

This naming tradition has been continued in the 21st Century, with Lyd (a replica of Lew, the fourth locomotive built to this basic design) operational on the Ffestiniog Railway and the Welsh Highland Railway. It had been intended that Lyd would receive Yeo's original chimney (which survived on a steamroller for 62 years) but it was found to be too corroded for further use.[5]

The naming tradition has also been applied to a Kerr Stuart Joffre class locomotive currently running on the revived L&B, which has been named Axe,[6] and a Maffei locomotive named Sid.[7]

Following the railway's closure in 1935 Yeo was scrapped along with all of the other L&B locomotives except Lew which was exported to South America.[4]

A set of frames for a new Yeo were built by Winson Engineering in 2000 and are currently stored waiting for construction to continue when funds are available.[8]

A 7 14 inches (180 mm)gauge model was built by Milner Engineering in 1979 and worked in Buckfastleigh before moving to the Gorse Blossom Railway in 1984.[9]

A 12 14 inches (310 mm) gauge model was built by David Curwen in 1978 for the Réseau Guerlédan Chemin de Fer Touristique in Brittany, France. When the line closed, it transferred to the Fairbourne Railway in North Wales.[10]

Notes

  1. "Design, Configuration and Statistics". 762 Club. Retrieved 5 February 2017.
  2. "Lynton and Barnstaple Locomotives". Southern Email Group's Internet Site. Retrieved 5 February 2017.
  3. "Lynton and Barnstaple Locomotives". Southern Email Group's Internet Site. Retrieved 5 February 2017.
  4. "History". The 762 Club. Retrieved 5 February 2017.
  5. "Lyd". Festipedia. Retrieved 5 February 2017.
  6. "Axe". Lynton and Barnstaple Railway. Retrieved 5 February 2017.
  7. "Locomotives". Lynton and Barnstaple Railway. Retrieved 5 February 2017.
  8. "Project Yeo". Lynton and Barnstaple Railway. Retrieved 5 February 2017.
  9. "South Devon Miniature Railway 7 ¼ inch". Miniature Railway World. Retrieved 5 February 2017.
  10. "Locomotives". Fairbourne Railway. Retrieved 5 February 2017.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.