Canon d'Infanterie de 37 modèle 1916 TRP

The Canon d'Infanterie de 37 modèle 1916 TRP (37mm mle.1916) was a French infantry support gun, first used during World War I. TRP stands for tir rapide, Puteaux (fast-firing, designed by the Atelier de Puteaux). The tactical purpose of this gun was the destruction of machine gun nests. It was also used on aircraft such as the Beardmore W.B.V and the Salmson-Moineau. Fighter ace René Fonck used a 37mm mle.1916 on a SPAD S.XII.

Canon d'Infanterie de 37 modèle 1916 TRP
American troops train with a 37 mm Infantry gun, May 1918
TypeInfantry support gun
Aircraft artillery
Place of originFrance
Service history
Used byFrance
United States
Commonwealth of the Philippines
Italy
Poland
North Vietnam
WarsWorld War I
World War II
First Indochina War
Production history
DesignerAtelier de Puteaux
Produced1916
Specifications
MassCombat: 108 kg (238 lbs)
Travel: 160.5 kg (354 lbs)
Barrel length74 cm (2 ft 5 in)

Shell37 x 94mm .R
Caliber37mm (1.45 in)
Elevation-8° to 17°
Traverse35°
Rate of fireSustained: 25 rpm
Muzzle velocity367 m/s (1,200 ft/s)[1]
Effective firing range1,500 m (1,600 yd)
Maximum firing range2,400 m (2,600 yd)

Description

A gun fitted with a gun shield, Flash suppressor and wheels, displayed at the United States Army Ordnance Museum, 2007

The modèle 1916 gun's 37mm caliber was the smallest allowed for explosive shells under the 1899 Hague Convention and hence was used by many nations for small guns.[2]

The guns were fitted to a tripod, to which wheels could be attached for transport. The guns could also be carried by four men, after being broken down into two, two-man loads - the 104-pound (47 kg) gun and recoil mechanism, and the 84-pound (38 kg) trails.[3] Some were equipped with a gun shield. The breech-block of the gun was essentially a smaller version of that fitted to the well-known French 75 gun.[4]

The guns could be crewed by two men, a loader and an aimer, and had a maximum rate of fire of around 35 rounds per minute.[3] They were equipped with a removable APX telescopic sight. for direct fire, and a quadrant sight for indirect fire.[5]

In US service, each gun was assigned an ammunition limber, which carried 14, sixteen-round boxes of ammunition as well as tools and accessories.[5] The gun and its limber were normally together towed by a single horse or mule,[3] but were manhandled forward if contact with the enemy was expected.

U.S. high explosive ammunition for the TRP was the Mark II HE shell with a projectile weighing 0.67 kilograms (1.5 lb) and a TNT bursting charge of 27.2 grams.[6] The French Army used the Obus explosif Mle1916 HE round with a projectile weighing 0.555 kilograms (1.22 lb) and a bursting charge of 30 grams. Captured rounds of this type were designated Sprgr 147(f) by the German military in World War II.

History

37 mm TRP Mle 1916, Musée de l'Armée (Paris).
US gunners in action 1918. This gun does not have the flash suppressor

During the First World War, the guns saw widespread use with both French and United States forces and were designated the 37mm M1916 in U.S. service. In combat they were found to be wanting, and it was found their intended task of destroying gun emplacements was better done by mortars. As well as infantry use, the guns were also fitted to the M1917 light tank, the first mass-produced U.S. tank. These tanks entered service too late for World War I, and none ever saw action.[7]

During the interwar years the U.S. Army organized its infantry regiments with "howitzer companies," armed, with among other heavy infantry weapons for want of actual infantry support howitzers, 37 mm M1916 guns. The Regular Army could not afford to maintain full companies (instead using platoons), but the National Guard could. The Army adopted a .22 caliber sub-caliber device as an economic measure that allowed training with the guns on indoor ranges.[8] By 1941, the howitzer companies of regiments were disbanded and converted to antitank platoons; the Army put most of the M1916 guns into storage, scrapped them, or converted their mechanisms for use as sub-caliber training devices for heavy guns. Some were used in the Philippines Campaign in 1941-42 as antitank weapons due to shortages of the 37 mm gun M3. The Japanese Type 11 37 mm infantry gun was based on this design.

The French Army still had the cannon in service in 1940 as a substitute for the 25 mm Hotchkiss anti-tank gun, which was in short supply. After the defeat of France by Germany, the Wehrmacht began using the TRP under the designation 3.7 cm IG 152(f).

Some were used by the Việt Minh at the beginning of the First Indochina War.[9]

37mm M1916 in action with U.S. forces, 1918

Similar Weapons

See also

References

Citations
  1. Johnson, Melvin M., Jr. (1944). Rifles and Machine Guns. William Morrow and Company. p. 385.
  2. "Bethlehem Steel 37mm".
  3. Handbook of Artillery, (1920), p.52
  4. Handbook of Artillery, (1920), p.54
  5. Handbook of Artillery, (1920), p.55
  6. "OrData record on Mk II HE shell". Archived from the original on 2012-03-11. Retrieved 2012-03-11.
  7. "M1916 37mm gun".
  8. "Army Target Practice Now Use Tiny Rifles." Popular Science, November 1930, P. 73.
  9. Windrow, Martin (20 Sep 2018). French Foreign Légionnaire vs Viet Minh Insurgent: North Vietnam 1948–52. Combat 36. Osprey Publishing. pp. 26, 38. ISBN 9781472828910.
Bibliography
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.