Diving inland in South Africa/Bass Lake

The dive site Bass Lake or Glen Douglas Quarry is an inland flooded quarry in the (locality name) area on the (topographical feature), near Vereeniging in the Gauteng province of South Africa.

The site is fresh water at high altitude (?m)


Understand

This lake is used primarily as a training location for Johannesburg-based Open Water diver training schools, along with Miracle Waters.

An entrance fee is charged to divers.

Position

Bass Lake is situated at 26°30'33.69"S, 28° 4'0.75"E.


Access is via the R59 - take the Henley Drive offramp, and follow signs.

This site is not in a Marine Protected Area. A permit is not required.


Depth

Maximum depth is 22m.

Visibility

Visibility is poor, from 6 metres down to 2 or less after much diving during the day.


Topography

Bass Lake is a flooded Dolomite quarry located South of Johannesburg, close to Vereeneging, with a 10 hectare surface area.


Conditions

Water is fairly warm, however there is a noticeable thermocline at approximately 8 metres. The water is very still, with no waves.

Facilities

  • Air and Nitrox fills are available on site
  • Diving gear is available to rent.
  • There is a restaurant, ablution facilities, and a number of lapas available to divers.
  • Camping is permitted, however the main gate is locked overnight.

Get in

Shore access dive.



See

Aquatic life

Features

There are several grids in various locations.

Wrecks

  • VW Golf at 12 metres
  • Bathtub at 9 metres
  • Bus at 12 metres
  • Home-made sub at 11 metres
  • Helicopter at 11 metres

Photography

Suggested Routes

Stay safe

Hazards

This site is at high altitude. You must set your decompression computer to the correct altitude range or use altitude tables to avoid increased risk of decompression sickness.

Skills

No special skills required, the site is suitable for entry level diver training.

Equipment

No special equipment required. Weighs may have to be changed to suit fresh water.

Back to Diving inland in South Africa


gollark: You cannot escape the terminals.
gollark: You need to do .canvas3d() to get the 3D canvas to put it on, and I think something with an origin?
gollark: ^
gollark: Madness.
gollark: And events.
This article is issued from Wikivoyage. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.