Zwick Roell Group

The Zwick Roell Group is a manufacturer of static testing machines and systems for materials and components testing. They manufacture products which are used to evaluate the mechanical and physical properties and performance of materials and components. Core static tests carried out with this equipment includes tensile, compression, flexure (also referred to as bend), and cycling.

Zwick Roell Group
IndustryMaterials and component testing
Founded1920
Headquarters
Ulm 
,
Germany 
Websitehttps://www.zwick.com

The company operates in 56 countries, has manufacturing facilities in Germany and the UK, and strategic headquarters in the USA and Singapore.

As of 2014 the Group employs 1250 staff in its international operations. It generates revenues of approximately 210 million euros.[1]

Zwick manufactures a range of testing systems for research and routine testing of materials and components. It has developed materials testing software, digital contact and non contact extensometry and pioneered robotic materials testing systems.

History

Roell & Korthaus have been involved in materials testing since 1920. Zwick began building machines and instruments for mechanical materials testing in 1937. The company founded by Professor Seger in 1876 evolved into the present-day concern Toni Techni. Roell and Korthouse, along with Toni Technik, have been part of the Zwick Roell Group since 1992. In July 2001 the group become a corporation under the name of Zwick Roell AG, incorporating Zwick, Toni Technik and Indentec Ltd. Acmel Labo, the French manufacturer of laboratory instruments for the cement, lime and plaster industry, has been part of the group since May 2002. Zwick/Roell AG acquired the German company GTM in 2007 and Messphysik of Austria in 2006. In 2014 ZwickRoell opened its new factory in Taicang, China, some 50 km north-west of Shanghai. Here, on a site totaling around 2,000 m², testing machines and instruments will be developed and assembled for the Chinese and world markets. [2]

Group Partners
  • Toni Technik Baustoffprüfsysteme GmbH : Operates in the building materials testing industry.
  • Messphysik Materials Testing GmbH : Zwick Roell AG has held a 100% stake in Messphysik Materials Testing GmbH since 2006. This Austrian-based company develops optical strain measurement for materials testing. [3]
  • Indentec Hardness Testing Machines Limited : Established in 1976, Indentec manufactures Vickers, Rockwell, Brinell and Universal hardness testing machines.
  • UK Calibrations Limited : UK Calibrations Limited are based in the UK Midlands and provide Service and Calibration for all hardness testing machines. [4]
  • Sercal Calibrations and Service : Sercal Calibrations and Service are based in Leominster and provide Service and Calibration for materials testing machines. [5]
  • Asmec GmbH :Zwick Roell Group took over Asmec in 2011. Suppliers of materials and component testing systems ASMEC GmbH are based in Radeberg, Germany.
  • ACMEL Labo : a member of the Zwick/Roell Group since 2002, it develops a range of devices for testing cement and mortar.
  • GTM Testing and Metrology GmbH : A manufacturer of load cells, torque transducers and multi-component transducers.
  • System Services Ltd: Servohydraulic training and support specialising in full turnkey project management.

Zwick Science Awards

Annually since 2010 a panel of judges from internationally renowned universities chaired by the Zwick Roell group, awards the Zwick Science Award to those three applications they consider to include the most outstanding and innovative use of mechanical testing equipment.

Types of mechanical tests carried out on Zwick Roell testing systems
gollark: Currently it just means "print all registers", but most information is there.
gollark: ```instructions (everything >8 bits is big endian):HALT - 00 - halt executionNOP - 01 - do nothingPEEK - 02 [register 1][register 2] [16-bit constant] - load value at (constant + ri2) in memory into ri1POKE - 03 [register 1][register 2] [16-bit constant] - ↑ but other way roundADD - 04 [register 1][register 2] [16-bit constant] - save (constant + ri2) to ri1JEQ - 05 [register 1][register 2] [16-bit constant] - set program counter to constant if ri1 = ri2JNE - 06 [register 1][register 2] [16-bit constant] - set program counter to constant if ri1 != ri2JLT - 07 [register 1][register 2] [16-bit constant] - set program counter to constant if ri1 < ri2TEST - FF - print debug information```
gollark: Well, Lua makes bitops like that kind of annoying, so maybe I'll just put "implement signed numbers" down as "later" rather than "never".
gollark: Hopefully nobody will notice.
gollark: I'm actually just not doing signed integers at all.

References
  1. About the Zwick roell Group. Zwick Corporate Webpage. Date: May 26, 2015.
  2. Zwick/Roell AG – Company Background
  3. Messphysik Website
  4. U K Calibrations Website
  5. Sercal Calibrations and Service Website
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.