Water-pouring algorithm

The water-pouring algorithm is a technique used in digital communications systems for allocating power among different channels in multicarrier schemes. It was described by R. C. Gallager in 1968[1] along with the water-pouring theorem which proves its optimality for channels having Additive White Gaussian Noise (AWGN) and intersymbol interference (ISI). For this reason, it is a standard baseline algorithm for various digital communications systems.[2]

The intuition that gives the algorithm its name is to think of the communication medium as if it was some kind of water container with an uneven bottom. Each of the available channels is then a section of the container having its own depth, given by the reciprocal of the frequency-dependent SNR for the channel.[1][3] To allocate power, imagine pouring water into this container (the amount depends on the desired maximum average transmit power). After the water level settles, the largest amount of water is in the deepest sections of the container. This implies allocating more power to the channels with the most favourable SNR. Note, however, that the ratio allocation to each channel is not a fixed proportion but varies nonlinearly with the maximum average transmit power.


References
  1. Gallager, R. C. (1968). Information Theory and Reliable Communications. Wiley.
  2. USA 6973122, Miller II et al, "Power allocation scheme for DMT-based modems employing simplex transmission", published Dec 6 2005
  3. Biglieri, Ezio (May 2003). "Coding and modulation for a horrible channel". IEEE Communications Magazine. 41 (5): 92–98. doi:10.1109/MCOM.2003.1200107.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.