Watchkeeping

Watchkeeping or watchstanding is the assignment of sailors to specific roles on a ship to operate it continuously. These assignments, also known as at sea watches are constantly active as they are considered essential to the safe operation of the vessel, and also allow the ship to respond to emergencies and other situations quickly. These watches are divided into work periods to ensure that the roles are always occupied at all times, while those members of the crew who are assigned to a work during a watch are known as watch keepers.

A sailor keeps watch aboard USS George H.W. Bush.

On a typical seafaring vessel, be it naval or merchant, personnel "keep watch" in various locations and duties across the ship, such as the bridge and engine room. Typical bridge watchkeepers include a lookout and a deck officer who is responsible for the safe navigation of the ship; whereas in the engine room, an engine officer ensures that running machinery continues to operate within tolerances.

Types of watches

A wide variety of types of watches have developed due to the different needs aboard merchant and naval vessels. This table gives some examples:

Naval Merchant
Navigational Officers

Enlisted
Engineering Officers
  • Engineering officer of the watch[1][3]

Enlisted
  • Engineering officer of the watch
Security
  • Petty officer of the watch
  • Gangway watch[2]
  • Security watch[2]
  • Sounding and security patrol[2]
  • Barracks security watch[2]
  • Sentry[2]
  • Gangway watch
  • Anti-piracy watch
Communications
  • Communications watch officer[5]
  • Radio watch[4]
  • Message center[4]
  • Signal bridge watches[4]
  • Messenger of the watch[2]
  • Radio watch
Combat
Others
  • Cargo watch
  • Anchor watch


Watch systems

A watch system, watch schedule, or watch bill is a method of assigning regular periods of watchkeeping duty aboard ships and some other areas of employment. A watch system allows the ship's crew to operate the ship 24 hours a day while also allowing individual personnel adequate time for rest and other duties.

Watch durations vary between vessels due to a number of reasons and restrictions; some watch systems aim to ensure that each team takes turns to work late at night, while other systems ensure the same team consistently works at the same hours every day.

Many watch systems incorporate the concept of a dog watch, whereby one watch is split into two shorter watches so that there is an odd number each day.[6] Doing so allows crew members to have a different watch schedule each day.[6] Often, the dog watches are set at dinner time to allow the entire crew to be fed in short order.[6]

Traditional system
A 2-section dogged watch[6]
Name Time Day 1 Day 2 Day 3
First watch 2000–0000 Team 1 Team 2 Team 1
Middle watch 0000–0400 Team 2 Team 1 Team 2
Morning watch 0400–0800 Team 1 Team 2 Team 1
Forenoon watch 0800-1200 Team 2 Team 1 Team 2
Afternoon watch 1200–1600 Team 1 Team 2 Team 1
First dog watch 1600–1800 Team 2 Team 1 Team 2
Second dog watch 1800–2000 Team 1 Team 2 Team 1

The traditional watch system arose from sailing ships of the late 19th century and was used by the Royal Navy and many other Commonwealth navies. It consisted of 5 four-hour periods and 2 two-hour periods. Those members of the crew whose work must be done at all times of the day were assigned to one of two divisions: the Starboard or the Port division. These can be further divided into two parts, e.g. First Port, Second Starboard.

The Royal Navy traditional submarine three watch system is 2 on 4 off during the day (8 a.m. to 8 p.m.) and 3 on 6 off during the night (8 p.m. to 8 a.m.).

Traditional system with three sections
A 3-section dogged watch
Name Time Day 1 Day 2 Day 3
First watch 2000–0000 Team 1 Team 2 Team 3
Middle watch 0000–0400 Team 2 Team 3 Team 1
Morning watch 0400–0800 Team 3 Team 1 Team 2
Forenoon watch 0800–1200 Team 1 Team 2 Team 3
Afternoon watch 1200–1600 Team 2 Team 3 Team 1
First dog watch 1600–1800 Team 3 Team 1 Team 2
Last dog watch 1800–2000 Team 1 Team 2 Team 3

The same arrangement of watch times can also be used with a crew divided into three sections. This gives each sailor more time off-duty, sometimes allowing sleeping periods of over seven hours. Names for the three watches—instead of Port and Starboard—vary from ship to ship. Naming schemes such as "Foremast", "Mainmast" and "Mizzen" and "Red", "White" and "Blue" are common.

Five and dime
3 five-hour watch sections
Day 1Day 2Day 3
2200–0200 Team 1 Team 3 Team 2
0200–0700 Team 2 Team 1 Team 3
0700–1200 Team 3 Team 2 Team 1
1200–1700 Team 1 Team 3 Team 2
1700–2200 Team 2 Team 1 Team 3

The so-called "five-and-dime" arrangement splits the day into five-hour watches, with the exception of a four-hour watch from 22:00 to 02:00.

Six Hour Shift
Six-hour watch sections
Day 1Day 2Day 3
0100–0700 Team Blue Team Gold Team White
0700–1300 Team Gold Team White Team Blue
1300–1900 Team White Team Blue Team Gold
1900–0100 Team Blue Team Gold Team White

The "Six-Hour-Shift" splits the day in four 6-hour watches, permitting a three section crew to maximize rest time in a 3-day working cycle. Also, this watch system takes into better account the meal times (of a 4 meal-a-day system), so that the ingoing team will be fed first, then keep watch, while the outgoing team will be relieved of watch, and then proceed to the messdeck.

US submarine system with three sections
Former 18-hr 3-section submarine watch
Name Time Day 1 Day 2 Day 3
Mid watch 2330–0530 Team 1 Team 2 Team 3
Morning watch 0530–1130 Team 2 Team 3 Team 1
Afternoon watch 1130–1730 Team 3 Team 1 Team 2
Evening watch 1730–2330 Team 1 Team 2 Team 3

Aboard United States submarines, the crew is typically divided into three sections, with each section keeping 8 hours of watch followed by 16 hours off-watch. This schedule has been a fairly recent change to submariner work and rest routines. For nearly 45 years prior to 2015, submariners were on 18-hour days with 6 hours of watch followed by 12 hours off watch. The 12 hours off-watch were further divided into the first 6 hours being used for maintenance, cleaning, and entertainment; while the second 6 hours were usually for sleeping.

Note that this arrangement resulted in one of the sections having two watches in one (24-hour) day, and there were no dog watches. Also, watch reliefs occurred no later than the bottom of the hour (2330, 0530, 1130, 1730). Typically, the first 30 minutes of the hour were used for the oncoming section to eat while the second 30 minutes of the hour were used for the off-going section to eat.

One-in-two watch system
A one-in-two watch
Day 1Day 2Day 3
0000–0700 Team 1 Team 1 Team 1
0700–1200 Team 2 Team 2 Team 2
1200–1700 Team 1 Team 1 Team 1
1700–0000 Team 2 Team 2 Team 2

Some warships now use the one-in-two system, also known as 7s and 5s, for the duration of the watches. This watch system is also sometimes referred to as Port and Starboard watches. This gives the sailors a longer sleeping period than the traditional two-watch system, while still maintaining the ability for the ship to function. Meals are generally scheduled around the watch turnovers at 0700, 1200, and 1700; sometimes a light midnight meal known as mid-rats (midnight rations) is provided for the 0000 turnover.

Swedish system
A 3-Section Swedish Watch
Day 1Day 2Day 3
0000–0600 Team 1 Team 1 Team 1
0600–1000 Team 2 Team 2 Team 2
1000–1200 Team 1 Team 1 Team 1
1200–1400 Team 3 Team 3 Team 3
1400–1800 Team 2 Team 2 Team 2
1800–2400 Team 3 Team 3 Team 3

Various alternative watch schedules have been devised, which are typically referred to as Swedish watches. Although there is no standard for what constitutes a Swedish watch, the variations all feature some element of extended watches to accommodate longer time off. Like the traditional watch system, they begin at 2000 hours. Some popular variations have durations of 6, 6, 4, 4, 4 and 5, 5, 5, 5, 4.

Merchant ships
Standard merchant watch system
Day 1Day 2Day 3
0400–0800 Team 1 Team 1 Team 1
0800–1200 Team 2 Team 2 Team 2
1200–1600 Team 3 Team 3 Team 3
1600–2000 Team 1 Team 1 Team 1
2000–0000 Team 2 Team 2 Team 2
0000–0400 Team 3 Team 3 Team 3

On merchant ships, watchkeepers typically keep watch for six periods of four consecutive hours. This system has a couple of advantages: it is easy to remember and it is consistent. For example, a member of watch team 1 will only have to remember that he is on the "4–8" watch, and knows that he goes on watch at 4 a.m. and 4 p.m. This scheme also allows inexperienced watchkeepers to keep watch from 8–12 a.m. and 8–12 p.m., when senior watchkeepers are likely to be awake and ready to assist in case of trouble.

By custom, in a ship with five deck officers the junior third mate takes the 8 to 12 watch, the senior third mate the 12 to 4 watch, and the second mate the 4 to 8 watch. This enables the second officer, who is the ship's navigator, to take morning and evening star sights. In ships with only four deck officers, the third officer will keep the 8 to 12, the second officer the 12 to 4, and the Chief Mate (equivalent to the Executive Officer in a navy ship) the 4 to 8 watch. The reason for this is to enable the Chief Mate to assign work to the deck gang before the ship's day begins, and to inspect it before going on watch at 1600 hours.

Ship's bell
Main article: Ship's bell

A ship's bell is used in concert with a watch system to indicate the time by means of bell strikes to mark the time and help sailors know when to change watches. Unlike civil clock bells, the strikes of a ship's bell do not accord to the number of the hour. Instead, there are eight bells, one for each half-hour of a four-hour watch. Bells would be struck every half-hour, and in a pattern of pairs for easier counting, with any odd bells at the end of the sequence.

gollark: There is no epicbot here. Also the apiotelephone has superior UI.
gollark: Anyway, it's running on the test instance now. Soon™ it will run on the nontest instance.
gollark: --apioform
gollark: Clearly, Terra's Projects in <#764843604270514186>.
gollark: ÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆÆ

See also

References
  1. USNI, 1996:361.
  2. Basic Military Requirements, NAVEDTRA 14325 (PDF). United States Navy. 2002.
  3. Yardley, Roland J.; Kallimani, James G.; Smallman, Laurence; Grammich, Clifford A. (2009). "DDG-51 Engineering Training" (PDF). RAND Corporation. ISBN 978-0-8330-4729-8.
  4. USNI, 1996:359.
  5. USNI, 1996:363.
  6. USNI, 1996:357.
  • United States Naval Institute (1996) [1902]. The Bluejackets' Manual (24th ed.). Annapolis, MD: United States Naval Institute. ISBN 978-1591141532.
  • James Stavridis; Robert Girrier (2007). Watch Officer's Guide: A Handbook for All Deck Watch Officers (15th ed.). Annapolis, MD: United States Naval Institute. ISBN 1-59114-936-3.

Further reading
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.