Walkalong glider

A walkalong glider is a lightweight, slow flying model aircraft designed to be kept aloft by controllable slope soaring in the rising air generated by the pilot who walks along with the glider as it flies, usually holding a paddle. Hands or even the forehead can also be used to create an updraft. This type of soaring differs from other types of slope soaring in that the orographic lift (or "hill") is following the plane as it flies in the air and thus no other wind is required.

Person flying a Walkalong glider.

Types of walkalong gliders have been patented.[1][2] Some walkalong glider designs have been named.

Some known models are

  • Air surfer,
  • windrider walkalong glider,
  • tumblewing
  • Follow foil[3]

Walkalong gliding has also been referred to as controllable slope soaring but should not be confused with dynamic soaring.

Ground effect should not be confused with ridge lift when explaining how walkalong gliders stay up. Ground effect involves a horizontal surface. Ridge lift requires a sloping surface. In ground effect the air does not have to move relative to the ground whereas ridge lift requires the wind to be blowing horizontally against the ridge. Walkalong gliders are sustained and controlled in the ridge lift produced by the moving paddle.

History

The first description of a walkalong glider appears in the 1955 patent of J. E. Grant.[4] The first flight of a functional walkalong glider appears briefly in the Academy Award winning documentary The Flight of the Gossamer Condor.[5]

Walkalong glider design

A walkalong glider must fly at or below walking speed. Light weight materials and specific design will reduce a walkalong glider's flying speed. For example, using a lower paper density will reduce a paper walkalong glider's wing loading and thus its air speed.,[6][7] Walkalong glider designs have differing wing loadings, for example, the tumblewing type designs will have lower wing loading than traditional nose weighted paper airplane designs made from the same paper density.[8] For nose weighted walkalong glider designs, the wings should include a twist or washout to improve roll control close to stall speed.[9] Although many walkalong gliders are flying wing designs (as are almost all flying and gliding animals) walkalong glider designs based on traditional fixed-wing aircraft (incorporating an empennage or tail) have been made from balsa wood sticks and tissue paper.[10][11]

The paddle should be made from a sheet of light weight but rigid material such as corrugated cardboard or foamcore. The larger the area of the sheet the stronger the updraft created at the top edge. A 1-meter square area paddle is large enough to fly most walkalong gliders.

gollark: I don't actually want to do this, but I mean check which subtype a node is.
gollark: Is there some way to switch over subtypes or whatever?
gollark: ADTs? ADTs ADTs. ADTs ADTs ADTs, ADTs ADTs!
gollark: ADTs!
gollark: ```haskelldata Node = Thingy Int Int Int | Thingummy String Int | Whatsit [Node]```

See also

References
  1. US Patent 2718092 Joseph E Grant 1950 - "A virtually vertical baffle is then moved beneath the airplane in a direction transverse to the plane of the baffle and in the desired direction of flight... gives rise to an updraft and the airplane rides along..."
  2. US Patent 5100357 Mcready et al. 1992. Refers to Grant's later patent - "A toy airplane is launched; and an air flow deflecting surface is located in spaced relation to a V-shaped, swept-back wing of the airplane to deflect air flow generally upwardly toward the flight path of the airplane to aid in sustaining or balancing its flight. That surface is movable relative to the wing, and may be hand-held beneath the flying wing..." -- This patent adds details to the construction of a walkalong glider which will fly in a swooping tilt after each "boost".
  3. John M. Collins (2012). Fantastic flight. 10 Speed Press. pp. 136–144. ISBN 1580085776.
  4. Method of Flying Toy Airplane and Means Therefor
  5. Walkalong Glider Inventor's Interview Page and New Directions
  6. Philip Rossoni (2012). Build and Pilot Your Own Walkalong Gliders. McGraw-Hill. pp. 22–23. ISBN 0071790551.
  7. Rossoni, P. Youtube video titled "Comparison of Tumblewings Made from Different Weight Paper." ,2012
  8. Philip Rossoni (2012). Build and Pilot Your Own Walkalong Gliders. McGraw-Hill. p. 77. ISBN 0071790551.
  9. Philip Rossoni (2012). Build and Pilot Your Own Walkalong Gliders. McGraw-Hill. pp. 71–73. ISBN 0071790551.
  10. Aronstein, D. youtube video titled "Model B-17 Flying Fortress Walkalong Glider", 2008
  11. Rossoni, P. Web page titled "Stick And Tissue Model Aircraft" , 2011
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.