Vanport Bridge
The Vanport Bridge is a four-lane continuous truss bridge that carries Interstate 376 (former Pennsylvania Route 60) across the Ohio River in Beaver County, Pennsylvania. A total of $10,476,268 was spent on construction of the 1,762-foot bridge over the Ohio River connecting Vanport and Potter townships, which was opened to traffic on December 23, 1968.[1] As a vital part of the Beaver Valley Expressway it was carrying near 30,000 vehicles daily in 1990.[2] In January 1990, bridge was closed for three days after corrosion and 14 cracks in welds ranging from 7 to 34 inches were discovered during routine PennDot inspection. Damage was located in the bottom truss plate holding the steel box beam in the central span.[3] Passenger traffic was rerouted to the Rochester–Monaca Bridge; trucks — to the Shippingport Bridge. The Vanport Bridge was reopened after no imminent danger was found with repairs and clean-up scheduled.
Vanport Bridge | |
---|---|
The Vanport Bridge at dusk. | |
Coordinates | 40°40′45″N 80°19′53″W |
Carries | 4 lanes of |
Crosses | Ohio River |
Locale | Vanport Township, Pennsylvania |
Maintained by | PennDOT |
Characteristics | |
Design | Continuous truss bridge |
Longest span | 220 m |
History | |
Opened | 1968 |
See also
Transport portal Engineering portal Pennsylvania portal - List of crossings of the Ohio River
Wikimedia Commons has media related to Vanport Bridge. |
References
- Pennsylvania Road Builder, 1970, Volumes 43-44, page 50.
- A Performance Audit of the PA Department of Transportation, Pursuant to Act 1981-35: Final Report.
- Vanport Bridge diagnosis, The Pittsburgh Press, January 5, 1990.