Vacutainer

A vacutainer blood collection tube is a sterile glass or plastic test tube with a colored rubber stopper creating a vacuum seal inside of the tube, facilitating the drawing of a predetermined volume of liquid. Vacutainer tubes may contain additives designed to stabilize and preserve the specimen prior to analytical testing. Tubes are available with a safety-engineered stopper, with a variety of labeling options and draw volumes. The color of the top indicates the additives in the vial.[1]

A range of Vacutainer tubes containing blood

Vacutainer tubes were invented by Joseph Kleiner and Becton Dickinson in 1949.[2] Vacutainer is a registered trademark of Becton Dickinson, which manufactures and sells the tubes today.[3][4]

Principles
Drawing blood using a vacutainer. The clear plastic sheath around the top of the tube holds the needle. The orange guard will shield the needle after it is withdrawn from the patient to protect from accidental needle sticks.

Vacutainer needle are double ended, with one side being encased in a thin rubber coating to prevent blood from leaking out as the Vacutainer tubes are changed during a multi-draw. When the needle is screwed into the translucent plastic needle holder, the rubber needle is inside the holder, and the exposed needle will be inserted into the vein. When a Vacutainer tube is inserted into the holder, its rubber cap is punctured by the inner needle and the vacuum in the tube pulls blood through the needle and into the tube. The filled tube is then removed and another can be inserted and filled the same way. The amount of air evacuated from the tube predetermines how much blood will fill the tube before blood stops flowing.

Each tube is topped with a color-coded plastic or rubber cap. Tubes often include additives that mix with the blood when collected, and the color of each tube's plastic cap indicates which additives it contains.

Blood collection tubes expire because over time the vacuum is lost and blood will not be drawn into the tube when the needle punctures the cap.

Types of tubes
A tiger top tube after centrifugation to separate blood cells from serum

Vacutainer tubes may contain additional substances that preserve blood for processing in a medical laboratory. Using the wrong tube may make the blood sample unusable for the intended purpose. These additives are typically thin film coatings applied using an ultrasonic nozzle.

The additives may include anticoagulants (EDTA, sodium citrate, heparin) or a gel with density between those of blood cells and blood plasma. Additionally, some tubes contain additives that preserve certain components of or substances within the blood, such as glucose. When a tube is centrifuged, the materials within are separated by density, with the blood cells sinking to the bottom and the plasma or serum accumulating at the top. Tubes containing gel can be easily handled and transported after centrifugation without the blood cells and serum mixing.

Vacutainer blood tubes

The meanings of the various colors are standardized across manufacturers.[5][6][7]

The term order of draw refers to the sequence in which tubes should be filled. The needle which pierces the tubes can carry additives from one tube into the next, so the sequence is standardized so that any cross-contamination of additives will not affect laboratory results.[7]

Containers containing coagulants
  • Gold or "tiger" red/black top: clot activator and gel for serum separation
  • Red top (plastic, not glass): clot activator but no serum separation gel
  • Orange or grey/yellow "tiger" top: thrombin, a rapid clot activator, for stat serum testing

Containers containing anticoagulants
  • Green: sodium heparin or lithium heparin used for plasma determinations in clinical chemistry (e.g. urea and electrolyte determination). Sodium heparin collection tubes are the classically preferred tube for peripheral blood or bone marrow for cytogenetic studies. Lithium heparin is considered suboptimal for cytogenetics.
  • Light green or green/gray "tiger": for plasma determinations.
  • Purple or lavender: K2 EDTA. This is a strong anticoagulant and these tubes are usually used for complete blood counts (CBC). Lavender top tubes are generally used when whole blood is needed for analysis. Can also be used for some blood bank procedures such as blood type and screen. EDTA tubes are preferred by most molecular genetics laboratories for molecular genetic studies (DNA or RNA).
  • Grey: sodium fluoride and oxalate. Fluoride prevents enzymes in the blood from working, by preventing glycolysis so a substrate such as glucose will not be gradually used up during storage. Oxalate is an anticoagulant.
  • Light blue: sodium citrate. Citrate is a reversible anticoagulant, and these tubes are used for coagulation assays.
  • Dark blue: EDTA. These tubes are used for trace metal analysis.
  • Black: used for Erythrocyte Sedimentation Rate (ESR).

Other
  • Red (glass): contains no additives.
  • Light yellow: contains sodium polyanethol sulfonate (SPS). Used for blood culture specimens or acid-citrate-dextrose (ACD), used for blood bank studies, HLA phenotyping, and paternity testing.
  • Tan (glass or plastic): contains either sodium heparin (glass) or K2EDTA (plastic). Used for lead determinations. These tubes are certified to contain no lead.

History
Blood collection tubes are among the basic medical supplies taken by disaster relief programs to affected areas.

History

Vacutainer technology was developed in 1947 by Joseph Kleiner,[2] and is currently marketed by Becton Dickinson (B-D).[8] The Vacutainer was preceded by other vacuum-based phlebotomy technology such as the Keidel vacuum.

The plastic tube version, known as Vacutainer PLUS, was developed at B-D in the early 1990s by E. Vogler, D. Montgomery and G. Harper amongst others of the Surface Science Group as US patents 5344611, 5326535, 5320812, 5257633 and 5246666.[9]

Vacutainers are widely used in phlebotomy in developed countries due to safety and ease of use. Vacutainers have the advantage of being prepared with additives, allowing easy multi-tube draws, and having a lower chance of hemolysis.[10] In developing countries, it is still common to draw blood using a syringe or syringes.

gollark: `OverflowError: factorial() argument should not exceed 9223372036854775807` - how apious.
gollark: Troubling.
gollark: What if you do log2(2**64)? WHAT THEN?
gollark: Something something birthday paradox, but it's still very unlikely.
gollark: The choice of compression method to use counts as extra data.

References
  1. "Vacutainer and Their Use in Blood Sampling". medcaretips.com. 5 February 2018. Retrieved 27 May 2020.
  2. Rosenfeld L (2000). "A golden age of clinical chemistry: 1948–1960". Clin Chem. 46 (10): 1705–14. PMID 11017957.
  3. "VACUTAINER - Trademark Details". Justia. Justia Corporate Center. 2020. Retrieved February 9, 2020.
  4. "BD Vacutainer®". BD. Becton Dickinson. 2020. Retrieved February 9, 2020.
  5. "Specimen Collection Tubes & Containers". Archived from the original on 2006-02-12. Retrieved 2006-02-01.
  6. "Quick Collection List". Archived from the original on 2005-12-16. Retrieved 2006-02-01.
  7. "Blood collection: routine venipuncture and specimen handling". Retrieved 2006-02-01.
  8. "BD Vacutainer Venous Blood Collection – Tube Guide" (PDF). Retrieved 2007-05-30.
  9. "US Patent Office Patent number search".
  10. Ames, A.C.; Bamford, E. (1975). "An Appraisal of the "Vacutainer" System for Blood Collection". Annals of Clinical Biochemistry. 12 (1–6): 151–55. doi:10.1177/000456327501200136. PMID 15637911.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.