VS-SATM1 mine

The VS-SATM1 is an Italian scatterable anti-tank landmine that was produced by Valsella Meccanotecnica SpA. The mine can be scattered by a GRILLO-128 man-portable single-tube launcher system or a VS-MDH helicopter based system. The mine has six pop-out fins which slow its descent and improve the dispersion characteristics.

The mine uses an electronic fuze with a ten-minute arming delay and a programmable life of between one hour and one year, which is set in one-hour increments. After the programmable life expires, the mine either self-destructs or self-neutralizes. The fuze is an electronic full-width device that probably uses magnetic and seismic sensors. The mine can also function underwater. The fuze contains an integral anti-handling device to hinder deminers.

The mine's warhead is a shaped charge, optimized to produce maximum spalling behind armour — it can blast a 45-millimeter-diameter hole through a 100-millimeter-thick armour plate.

Specifications
  • Diameter: 128 mm
  • Height: 105 mm
  • Weight: 2.5 kg
  • Explosive content: 0.8 kg
gollark: It's going to be using the quadratic formula internally, yes, but calculator.
gollark: quadratic formula < calculator, in my opinion.]
gollark: I use this to remember the ten-ish things I somewhat need to remember but forget regularly.
gollark: What if spaced repetition system?
gollark: https://discord.com/channels/346530916832903169/348702212110680064/818877622683566085

References
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.