Upper critical solution temperature

The upper critical solution temperature (UCST) or upper consolute temperature is the critical temperature above which the components of a mixture are miscible in all proportions.[1] The word upper indicates that the UCST is an upper bound to a temperature range of partial miscibility, or miscibility for certain compositions only. For example, hexane-nitrobenzene mixtures have a UCST of 19 °C, so that these two substances are miscible in all proportions above 19 °C but not at lower temperatures.[2] Examples at higher temperatures are the aniline-water system at 168 °C (at pressures high enough for liquid water to exist at that temperature),[3] and the lead-zinc system at 798 °C (a temperature where both metals are liquid).[4]

A solid state example is the palladium-hydrogen system which has a solid solution phase (H2 in Pd) in equilibrium with a hydride phase (PdHn) below the UCST at 300 °C. Above this temperature there is a single solid solution phase.[5]

In the phase diagram of the mixture components, the UCST is the shared maximum of the concave down spinodal and binodal (or coexistence) curves. The UCST is in general dependent on pressure.

The phase separation at the UCST is in general driven by unfavorable energetics; in particular, interactions between components favor a partially demixed state.[6]

Polymer-solvent mixtures
A plot of typical polymer solution phase behavior including a UCST
Main article: Temperature-responsive polymer

Some polymer solutions also have a lower critical solution temperature (LCST) or lower bound to a temperature range of partial miscibility. As shown in the diagram, for polymer solutions the LCST is higher than the UCST, so that there is a temperature interval of complete miscibility, with partial miscibility at both higher and lower temperatures.[7]

The UCST and LCST of polymer mixtures in general depend on polymer degree of polymerization and polydispersity.[1]

The seminal statistical mechanical model for the UCST of polymers is the Flory–Huggins solution theory.

By adding soluble impurities the upper critical solution temperature increases and lower critical solution temperature decreases.

gollark: Why not learn Go, THE BEST LANGUAGE EVER BECAUSE GOOGLE?
gollark: <@236831708354314240> I do run a modded MC server with only *55* mods.
gollark: MODS
gollark: I'm sure there's a Go version.
gollark: We need a haskell version which puts all brackets at the end.

See also

References
  1. "IUPAC Compendium of Chemical Terminology". Retrieved 2012-10-18.
  2. P.W. Atkins and J. de Paula, "Atkins' Physical Chemistry" (8th edn, W.H. Freeman 2006) p. 185
  3. Laidler K.J. and Meiser J.H. "Physical Chemistry" (Benjamin/Cummings 1982) p. 230
  4. Laidler and Meiser p. 232
  5. Atkins and de Paula p. 186
  6. Sanchez, IC and Stone, MT, "Statistical Thermodynamics of Polymer Solutions and Blends" in Polymer Blends Volume 1: Formulation. Edited by D.R. Paul and C. B. Bucknall, 2000 John Wiley & Sons, Inc.
  7. Cowie, J.M.G. "Polymers: Chemistry and Physics of Modern Materials" (2nd edn, Blackie 1991) pp. 174–176


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.