UIC wagon numbers

Wagon numbers (or coach numbers) are key data for railway operations. They enable a railway wagon or coach to be positively identified and form a common language between railway operators, infrastructure companies and the state authorities. The system of wagon numbering has been laid down by the International Union of Railways (Union internationale des chemins de fer or UIC) and is similar to that used for the locomotives and multiple units. Vehicle numbering is now governed by the Intergovernmental Organisation for International Carriage by Rail[1] and in Technical Specifications for Interoperability (TSI) of the European Union.

Wagon numbers
This ITL Hbbillns goods wagon with country code 56 is based in Slovakia
Wagon number of an Italian Rgmms flat wagon

The complete wagon number comprises 12 digits. The individual digits have the following meaning:

Digits 1-2: Type of vehicle and indication of the interoperability capacity
(on multiple units, type)
Digits 3-4: Country Code (Owner before 2006)
Digits 5-8: Vehicle type information
Digits 9-11: Individual running number (serial number)
Digit 12: Self-check digit

Placement of the code

As shown on the photographs at right, the code may be arranged either vertically (e.g. on closed wagons) on three or more lines at man's height with the letter codes next to the corresponding part of the digit code, or horizontally (e.g. on flat wagons) at the bottom of the chassis side with all digits together (with groups separated by spaces and the check digit by a dash) and all letters together. It is always found on both sides of the wagon, not on the front or back.

Calculation of the self-check digit

The digits are multiplied individually from right to left alternately by 2 and 1, and digit summed using the Luhn algorithm. The difference between this sum and the next multiple of ten is the check digit, placed after the eleventh digit, separated by a dash.

Examples

Wagon number: 21 81 2471 217

2 1 – 8 1 – 2 4  7 1 2 1  7
     multiplying by 
2 1   2 1   2 1  2 1 2 1  2
          gives
4 1  16 1   4 4 14 1 4 1 14
        digit sum
4 1   7 1   4 4  5 1 4 1  5   sum = 37, next multiple of ten = 40 => check digit = 3

Wagon number: 51 80 0843 001

 5  1  8 0 0 8 4 3 0 0 1
     multiplying by 
 2  1  2 1 2 1 2 1 2 1 2
          gives
10  1 16 0 0 8 8 3 0 0 2
        digit sum
 1  1  7 0 0 8 8 3 0 0 2      sum = 30, next multiple of ten = 30 => check digit = 0

Country code

At the beginning of 2006 the country replaced the owner (almost exclusively state railways), with the owner now indicated by following letters. For example, for a vehicle registered in Germany on the AAE, which had its own code as a private railway, "68 AAE" became "80 D-AAE". (see also UIC country code)

Reading of numbers

Numbers are read visually, the method of choice today (2008). No railway is able to read the number automatically with the required reliability (less than 1 error in 10,000). Using OCR readers the numbering (DB AG: Font Gerade Normschrift DIN 16 Variant DB) can be only be read to an accuracy of no better than 5% (1 in 20).

Numbering systems

The UIC has the following numbering systems, as detailed in leaflets:

  • Leaflet 419-2 - Analytical numbering of international freight trains.[2]
  • Leaflet 428-1 - International sorting system for wagonload traffic.[3]
  • Leaflet 438-2 - Identification marking for freight rolling stock.[4]
  • Leaflet 920-1 - Standard numerical coding for railway undertakings, infrastructure managers and others companies involved in rail-transport chains.[5]
  • Leaflet 920-2 - Standard numerical coding of locations.
  • Leaflet 920-10 - Standard numerical code for railway customers.[6]
  • Leaflet 920-14 - Standard numerical country coding for use in railway traffic.[7]

These agreements have not yet achieved the status of a standard or norm.

gollark: Also, due to parasitic capacitanceoforms, my code won't run unless you have a wire plugged into an unconnected arbitrary region of one of the breadboards.
gollark: And at very high clock rates, electromagnetic interference issues in some of the address lines can cause the wrong regions of memory to be read, in somewhat predictable and exploitable ways.
gollark: For instance, via [REDACTED], it's able to reflash parts of the EEPROM while running.
gollark: Oh, tons.
gollark: It's too late, I already reverse-engineered ridiculously specific details of the processor via extrapolating from your current messages about it and GTech™️ orbital scans via our future prediction engines, then wrote code which does cool things but is highly dependent on weird implementation quirks.

See also

References
  1. see: UTP Marking 2015, Uniform Technical Prescription Applicable to Vehicle Numbers and linked alphabetical marking on the bodywork: THE RAILWAY VEHICLE MARKING, Applicable from 1.1.2015, retrieved from: OTIF page Prescriptions and Other Rules
  2. Leaflet 419-2, Analytical numbering of international freight trains, Obligatory, 2nd edition, November 2008 - Translation, 1/09 (issued 1/02/2009), ISBN 978-2-7461-1957-4
  3. Leaflet 428-1, International sorting system for wagonload traffic, Obligatory, 1st edition of 1.10.77 and 1 Amendment
  4. Leaflet 438-2, Identification marking for freight rolling stock, Obligatory, 7th edition, May 2004 - Translation, 3/04 (issued 1/08/2004), ISBN 2-7461-0699-X
  5. Leaflet 920-1, Standard numerical coding for railway undertakings, infrastructure managers and others companies involved in rail-transport chains, Obligatory, 6th edition, November 2005 - Original, 4/05 (issued 1/11/2005), ISBN 2-7461-1023-7
  6. Leaflet 920-10, Standard numerical code for railway customers, Obligatory, 1st edition of 1.7.74 and 1 Amendment
  7. Leaflet 920-14, Standard numerical country coding for use in railway traffic, Obligatory, 2nd edition, March 2005 - Translation, 2/05 (issued 1/05/2005), ISBN 2-7461-0929-8
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.