Zilog Z8000

The Z8000 ("zee- or zed-eight-thousand") is a 16-bit microprocessor introduced by Zilog in early 1979. The architecture was designed by Bernard Peuto while the logic and physical implementation was done by Masatoshi Shima, assisted by a small group of people.

Zilog Z8000
DesignerZilog
Bits16-bits
Introduced1979 (1979)
DesignCISC
TypeRegister-Memory
BranchingCondition register
Registers
16× 16-bit general purpose
24-bit PC
16-bit status
Zilog Z8000
Z8001 on the motherboard of an Olivetti M20 computer
Performance
Data width16 bits
Address width23 bits
Physical specifications
Package(s)
  • 48-pin DIP (8001)
  • 40-pin DIP (8002)

The Z8000 was not Z80-compatible, although it featured many of the well-received design notes that made the Z80 popular. Among these was the ability for its registers to be combined together and used as a single larger register - while the Z80 allowed two 8-bit registers to be used as a single 16-bit register, the Z8000 expanded this by allowing two 16-bit registers to operate as a 32-bit register, or four to operate as a 64-bit register. These combined registers were particularly useful for mathematical operations.

Although it was an attractive design for its era, and saw some use in the early 1980s, it was never as popular as the Z80. Federico Faggin, then CEO of Zilog, believes a reason for this was that Zilog was mainly owned by a single investor, Exxon Enterprises, which had ambitions to compete with IBM. Thus, when IBM began the IBM PC project, they saw Zilog as a competitor, and chose the Intel 8088 over the Z8000 as Intel was not seen as competition in the computer market.[1] But the Z8000's launch date placed it between the Intel 8086 (April 1978), and the Motorola 68000 (September 1979), the latter of which had a 32-bit instruction set architecture.

The Zilog Z80000 was a 32-bit follow-on design.

Features
The Z8000 registers
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 (bit position)
  Grouping
Main registers 16-bit 32-bit 64-bit
RH0 RL0 R0 RR0 RQ0
RH1 RL1 R1
RH2 RL2 R2 RR2
RH3 RL3 R3
RH4 RL4 R4 RR4 RQ4
RH5 RL5 R5
RH6 RL6 R6 RR6
RH7 RL7 R7
  R8 RR8 RQ8
  R9
  R10 RR10
  R11
  R12 RR12 RQ12
  R13
  R14 RR14
  R15
Status register
S SN E V M - - - C Z S PO D I H - Flags
Program counter
0 Segment 0 0 0 0 0 0 0 0 Program Counter
Address

The Z8000 initially shipped in two versions; the Z8001 with a full 24-bit external address bus to allow it to access up to 8 megabytes of memory, and the Z8002, which supported only 16-bit addressing to allow 64 kilobytes of memory. This allowed the Z8002 to have eight fewer pins, shipping in a smaller 40-pin DIP format that made it less expensive to implement. Like the Zilog Z80, the Z8000's included built-in DRAM refresh circuitry.

The series was later expanded to include the Z8003 and Z8004, updated versions of the Z8001 and Z8002, respectively. These versions were designed to provide improved support for virtual memory, adding new status registers to indicate segmentation faults (test and set) and provide an abort capability.

There was both a user mode ("normal") and a supervisor mode, selected by bit 14 in the flag register. In supervisor mode, the stack registers point to the system stack and all privileged instructions are available. In user mode, the stack registers point to the normal stack and all privileged instructions will generate a fault.

The register set consisted of sixteen 16-bit general purpose registers, labeled R0 through R15. The registers can be concatenated into eight 32-bit registers, labeled RR0/RR2/../RR14, or into four 64-bit registers, labeled RQ0/RQ4/RQ8/RQ12. The first eight registers can be also subdivided into sixteen 8-bit registers, labeled RL0 though RL7 for the lower byte and RH0 through RH7 for the upper (high) byte. Register R15 is designated as stack pointer. On the Z8001, register R14 is used to add a fixed offset to the stack pointer, and the program counter is expanded to 32-bits to include a similar offset.

Die of Zilog Z8002

Memory handling

The Z8000 used a segmented memory map, with a 7-bit "segment number" and a 16-bit offset. Both numbers were represented by pins on the Z8001, meaning that it could directly address a 23-bit memory, or 8 MB. Internally, however, instructions could only directly access data within the 16-bit offset. This allowed the instruction format to be smaller; a system with direct access to a 23-bit address would need to read three bytes (24-bits) from memory for every address referred to in the code, thus requiring two reads on a 16-bit bus. With segments, the addresses needed only a single 16-bit read and the segment number only needed to be updated when the data crossed the 16-bit/64 kB boundaries. This can improve overall performance when the data can be arranged within 64 kB spans.

The optional 48-pin Z8010 memory management unit (MMU) expanded the memory map to 16 MB by translating the 23-bit address from the CPU to a 24-bit one. Internally, it held a list of 64 segments and an 8-bit pointer to the physical location of that segment in RAM. When the CPU attempted to access a particular segment, the Z8010 would translate that into an 8-bit address on the address bus, and then pass the 16-bit offset on unchanged. This allowed multiple programs to be spread out in physical RAM, each one given its own space to work in while believing they were accessing the entire 8 MB of RAM. The segments were variable length, expanding up to 64 kB in order to allow the entire memory to be accessed from 64 segments. If more than 64 segments were needed, multiple Z8010s could be used.[2] The Z8010 was not available at the time of launch, and was ultimately nine months to a year late.[3]

With the release of the Z8003/Z8004, the Z8015 was added to the lineup, adding paged memory support. The main difference is that the Z8015 breaks down the memory into 64 2 kB blocks, whereas the Z8010 broke memory into 64 blocks, perhaps as much as 64 kB each. Additionally, the Z8015 expands the segment number from 7 to 12 bits, and then using those as the most significant bits of the 23-bit overall address, overriding the upper bits of the original 16-bit offset. The advantage to this access scheme is that it is easy to read or write 2 kB blocks to a hard drive, so this pattern more closely matches what will ultimately happen on a segfault.[2]

Z8000 CPU based systems

In the early 1980s, the Zilog Z8000 CPU was popular for desktop sized Unix machines. These low-cost Unix systems allowed small businesses to run a true multi-user system and share resources (disk, printers) before networking was common. They usually had only RS232 serial ports (4–16) and parallel printer ports instead of built in graphics, as was typical for servers of the time.

Z8000-based computer systems included Zilog's own System 8000 series, as well as other manufacturers:

  • January 1980: C8002 made by Onyx Systems used the Z8001, ran Unix System III, came with C and FORTRAN 77 compilers, and had an available COBOL compiler as well. It had 8 serial ports, 1 QIC tape drive, a single 8" hard drive and cost ~$25k. The main processor offloaded the disk, tape, and serial IO operations to a Z80 processor on a second board.[4]
  • 1982: Olivetti M20, a non IBM-compatible PC that ran Olivetti PCOS, a derivative of COSMOS or CP/M.[5]
  • 1980-1986: Olivetti Linea 1 S1000, S6000, M30, M40, M50, M60, M70. These minicomputers from Olivetti all ran BCOS/COSMOS.[5]
  • 1985: the cancelled Commodore 900 computer project
  • 1987–1989: the East German EAW (Elektro-Apparate-Werke) produced the Workstation/Multiuser System P8000 based on the East German U8000 clone of the Z8000.[6]

The Zilog S8000 computer came out with a version of Unix called ZEUS (Zilog Enhanced Unix System). ZEUS was a port of Unix Version 7 and included what were referred to as 'the Berkeley Enhancements'. ZEUS included a version of COBOL called RM/COBOL (Ryan McFarland COBOL). The availability of RM/COBOL allowed many commercial applications to be quickly ported to the S8000 computer although this did not help its long term success. The S8000 did find some success with the IRS and tax preparers in United States, who used the model for processing of electronically filed tax returns.[7]

There was a Z8000 version of the Xenix Operating System.[8] Namco used the Z8000 series in its Pole Position and Pole Position II arcade games. The machines used two Z8002's, the 64 kB versions of the Z8000.

The reported inclusion of the device within military designs[9] perhaps provides an explanation for the continued survival of the Z8000 today, in the shape of the Z16C01/02 Serial Communication Controllers (SCC). Also, the Standard Central Air Data Computer (SCADC) was utilizing the Z8002.[10] The end of life notice from Zilog was sent in 2012.[11]

Limited success

While the Z8000 did see some use in the early 1980s, it was passed over for other designs relatively quickly.[1]

Federico Faggin, then CEO of Zilog, later suggested this was due to Zilog's financing arrangement with Exxon's venture capital arm, Exxon Enterprises. Enterprises had made a number of investments in the computer field, and by the early 1980s was positioning itself as a competitor to IBM in the large system space. Faggin suggests that IBM thus saw Zilog as a competitor, and refused to consider the Z8000 as a result.[1]

However, an examination of the choices available to designers in the early 1980s suggests there is a much more prosaic reason the Z8000 was not more popular:

Comparing assembly language versions of the Byte Sieve, one sees that the Z8000's 1.1 seconds is impressive when compared to the 8-bit designs it replaced, including Zilog's 4 MHz Z80 at 6.8 seconds, and the popular 1 MHz MOS 6502 at 13.9. Even the newer Motorola 6809 was much slower, at 5.1 seconds.[12] It also fares well against the Intel 8086 running at 8 MHz, which turned in a time of 1.9 seconds, or the less expensive Intel 8088 at 5 MHz, at 4 seconds.

The Intel processors were packaged in 40-pin DIPs, which made them less expensive to implement than the 48-pin Z8001. The Z8002 also had a 40-pin package, but had a 16-bit data bus that could only access 64 kB of RAM, whereas the Intel processors had a 20-bit bus that could access 1 MB of RAM. Internally, the 23-bit addresses of the Z8000 were also more complex to process than Intel's simpler system using 16-bit base addresses and separate segment registers. For those looking for a low-cost option able to access (what was then) large amounts of memory, the Intel designs were competitive and available over a year earlier.[12]

For those looking for pure performance, the Z8000 was the fastest CPU available in early 1979. But this was true only for a period of a few months. The 16/32-bit Motorola 68000 came to market later the same year at 8 Mhz, and turns in a time of 0.49 seconds on the same Sieve test, over twice as fast as the Z8000.[12] Although it used a larger 64-pin DIP layout, this was a small price to pay for what was by far the fastest processor of its era. Its 32-bit instructions and registers, combined with a 24-bit address bus with flat addressing, also made it much more attractive to designers, something Faggin admits to.[1]

Second sources

Several third parties manufactured the Z8000 including AMD, SGS-Ates, Toshiba and Sharp.[13]

gollark: 4d6.
gollark: I duplicate MYSELF then, muahahahaha.
gollark: I wonder if I can duplicate abstract concepts at high enough level.
gollark: Hmmmm.
gollark: Um.

References
  1. Hendrie, Gardner (2006). "Oral History of Federico Faggin" (PDF). Computer History Museum. Retrieved 2017-01-24.
  2. Fawcett, B. K. (1983). "A tutorial overview of the Z8003 and Z8004 microprocessors and the Z8010 and Z8015 memory management units". Journal of Microcomputer Applications. 6 (2): 163–178. doi:10.1016/0745-7138(83)90028-3.
  3. "Oral History Panel on the Development and Promotion of the Zilog Z8000 Microprocessor" (PDF). p. 20. Archived from the original (PDF) on 2010-07-08.
  4. Granneman, Scott. "Computing History 1968–Present". Retrieved 2009-07-16.
  5. Kranenborg, Jurjen; Elvey, Dwight K.; Groessler, Christian. "The Z8000 / Z80,000 / Z16C00 CPU homepage". Retrieved 2009-07-16.
  6. "E. German Businesses See Tough Times After Merger". Sun Sentinel. Retrieved 2015-07-03.
  7. "efile History - Electronic Tax Filing in the United States". Retrieved 2012-12-13.
  8. Bezroukov, Nikolai (2008-11-15). "XENIX—Microsoft's Short-lived Love Affair with Unix". Softpanorama. Retrieved 2009-07-16.
  9. "Z8000". TechEncyclopedia. TechWeb. Retrieved 2009-07-16.
  10. Standard Central Air Data Computer (PDF). GEC Avionics. 1985.
  11. "Z16C0110PSG and Z16C0210PSG End of Life (EOL) Notification" (PDF). Retrieved 2016-07-17.
  12. Gilbreath, Jim; Gilbreath, Gary (January 1983). "Eratosthenes Revisited: Once More through the Sieve". Byte. pp. 283–325.
  13. "Zilog Z8000". Digital History: Time Line. old-computers.com. April 1979. Retrieved 2009-07-16.

Further reading
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.