Trichlorosilane

Trichlorosilane is an inorganic compound with the formula HCl3Si. It is a colourless, volatile liquid. Purified trichlorosilane is the principal precursor to ultrapure silicon in the semiconductor industry. In water, it rapidly decomposes to produce a silicone polymer while giving off hydrochloric acid. Because of its reactivity and wide availability, it is frequently used in the synthesis of silicon-containing organic compounds.[1]

Trichlorosilane
Names
IUPAC name
trichlorosilane
Other names
silyl trichloride, silicochloroform
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.030.026
EC Number
  • 233-042-5
RTECS number
  • VV5950000
UNII
UN number 1295
Properties
HCl3Si
Molar mass 135.45 g/mol
Appearance colourless liquid
Density 1.342 g/cm3
Melting point −126.6 °C (−195.9 °F; 146.6 K)
Boiling point 31.8 °C (89.2 °F; 304.9 K)
hydrolysis
Hazards
Safety data sheet ICSC 0591
Highly flammable (F+)
Harmful (Xn)
Corrosive (C)
R-phrases (outdated) R12, R14, R17, R20/22, R29, R35
S-phrases (outdated) (S2), S7/9, S16, S26, S36/37/39, S43, S45
NFPA 704 (fire diamond)
Flammability code 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acid
4
3
2
Flash point −27 °C (−17 °F; 246 K)
185 °C (365 °F; 458 K)
Explosive limits 1.2–90.5%
Related compounds
Related chlorosilanes
Chlorosilane
Dichlorosilane
Dichloromethylsilane
Chlorodimethylsilane
Silicon tetrachloride
Related compounds
Trifluorosilane
Tribromosilane
Chloroform
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Production

Trichlorosilane is produced by treating powdered metallurgical grade silicon with blowing hydrogen chloride at 300 °C. Hydrogen is also produced, as described in the chemical equation:

Si + 3 HCl → HCl3Si + H2

Yields of 80-90% can be achieved. The main byproducts are silicon tetrachloride (chemical formula SiCl4), hexachlorodisilane (Si2Cl6) and dichlorosilane (H2SiCl2), from which trichlorosilane can be separated by distillation.

Tank car of trichlorosilane (the blue diamond means "Dangerous when wet")

It is also produced from silicon tetrachloride:[2]

Si + 3 SiCl4 + 2 H2 → 4 HCl3Si

Applications

Trichlorosilane is the basic ingredient used in the production of purified polysilicon.

HCl3Si → Si + HCl + Cl2

Ingredient in hydrosilylation

Via hydrosilylation, trichlorosilane is a precursor to other useful organosilicon compounds:

RCH=CH2 + HSiCl3 → RCH2CH2SiCl3

Some useful products of this or similar reactions include octadecyltrichlorosilane (OTS), perfluoroctyltrichlorosilane (PFOTCS), and perfluorodecyltrichlorosilane (FDTS). These reagents used in surface science and nanotechnology to form Self-assembled monolayers. Such layers containing fluorine decrease surface energy and reduce sticking. This effect is usually exploited as coating for MEMS and microfabricated stamps for a nanoimprint lithography (NIL) and in injection molding tools.[3]

Organic synthesis

Trichlorosilane is a reagent in the conversion of benzoic acids to toluene derivatives. In the first step of a two-pot reaction, the carboxylic acid is first converted to the trichlosilylbenzyl compound. In the second step, the benzylic silyl derivative is converted to the toluene derivative with base.[4]

References

  1. Lianhong Xu, Ravi Kurukulasuriya, "Trichlorosilane" Encyclopedia of Reagents for Organic Synthesis, 2006. doi:10.1002/047084289X.rt213.pub2
  2. Simmler, W. "Silicon Compounds, Inorganic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a24_001.
  3. Cech J, Taboryski R (2012). "Stability of FDTS monolayer coating on aluminum injection molding tools". Applied Surface Science. 259: 538–541. Bibcode:2012ApSS..259..538C. doi:10.1016/j.apsusc.2012.07.078.
  4. George S. Li, David F. Ehler, R. A. Benkeser "Methyl Groups By Reduction Of Aromatic Carboxylic Acids With Trichlorosilane - Tri-n-propylamine: 2-methylbiphenyl" Org. Synth. 1977, volume 56, pp. 83. doi:10.15227/orgsyn.056.0083
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.