Thiruvallam Sree Parasurama Temple

Thiruvallam Sree Parasurama Swami Temple is one of the most ancient temples of South India. It is situated on the banks of Karamana River near Thiruvallam, Thiruvananthapuram. It is the only temple in Kerala dedicated to Lord Parasurama.[1] The temple is 6 km from Kovalam Beach and 5 km from Trivandrum International Airport and 3 km from Thiruvananthapuram.3 km from Attukal Temple 2 km from Pazhanchira Devi Temple and 1km from Sree Alukadu Devi temple.[2] This heritage structure is placed under the list of monuments of national importance.

Sree Parasurama Temple
Temple Gate
LocationThiruvallam, Kerala, India
Coordinates8.437°N 76.951°E / 8.437; 76.951
TypeCultural
State Party India
Location in Kerala, India

History

It says that the temple was built during the 12th and 13th century, late Pandyan period. The temple is considered a protected monument by the Archaeology Department of Kerala.[3] It is famous for Balitharpanam (a tribute to ancestors). Legend has it that Lord Parasurama is the creator of Kerala and the temple dedicated to him is considered as a holy place for his devotees. During the karkidaka vavu day (a holiday in the Malayalam month of karkidakam) as part of the bali (a religious ritual), devotees pay homage to the departed souls of forefathers, after taking a dip in the holy water.[4]

gollark: The reason they *do* is probably just consistency with other methods (it would be very annoying if they worked very differently to GET routing-wise) and so requests can be routed to the right handler more easily.
gollark: <@498244879894315027> Why wouldn't (shouldn't?) they have a URL?
gollark: They do have to spin pretty fast. There are sealed helium ones now.
gollark: > The HDD's spindle system relies on air density inside the disk enclosure to support the heads at their proper flying height while the disk rotates. HDDs require a certain range of air densities to operate properly. The connection to the external environment and density occurs through a small hole in the enclosure (about 0.5 mm in breadth), usually with a filter on the inside (the breather filter).[124] If the air density is too low, then there is not enough lift for the flying head, so the head gets too close to the disk, and there is a risk of head crashes and data loss. Specially manufactured sealed and pressurized disks are needed for reliable high-altitude operation, above about 3,000 m (9,800 ft).[125] Modern disks include temperature sensors and adjust their operation to the operating environment. Breather holes can be seen on all disk drives – they usually have a sticker next to them, warning the user not to cover the holes. The air inside the operating drive is constantly moving too, being swept in motion by friction with the spinning platters. This air passes through an internal recirculation (or "recirc") filter to remove any leftover contaminants from manufacture, any particles or chemicals that may have somehow entered the enclosure, and any particles or outgassing generated internally in normal operation. Very high humidity present for extended periods of time can corrode the heads and platters. https://en.wikipedia.org/wiki/Hard_disk_drive#Integrity
gollark: Interweb says it's to keep pressure equalized between the inside and out.

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.