The Omar Khayyam Show

Spike Milligan wrote and performed in three series of the radio comedy program The Idiot Weekly for the Australian Broadcasting Commission in 1958–1962. Six episodes were remade by the BBC in 1963 as The Omar Khayyam Show.

The cast was Spike Milligan, John Bluthal, Bob Todd, Bill Kerr and Barry Humphries with music by George Chisholm & his Jolly Jazzers. Brian Wilde appears in episode 1 and Tim Gudgin in episodes 2–6, whilst in one episode Barry Humphries is heard doing a character voice similar to Dame Edna's. [1] The producer was Charles Chilton who had also produced some episodes of The Goon Show, on which The Idiot Weekly was based.

It was broadcast weekly from 27 December 1963. The episodes were (in broadcast order) Ned Kelly, The Ashes, The Prime Minister's Trousers, The Flying Dustmen, The America Cup and Walzing Matilda. The scripts had minor changes to remove some references to Australian locations and personalities unfamiliar to British audiences. However, some better known personalities remained, notably Sir Donald Bradman.

EpisodeTitleOriginal broadcast datePreservation
1Ned Kelly27 December 1963Edited BBC "ring main" (internal distribution system) recording, and unedited domestic off-air recording
2The Ashes3 January 1964Domestic off-air recordings
3The Prime Minister's Trousers10 January 1964Domestic off-air recordings
4The Flying Dustman17 January 1964Unedited BBC Sound Archives copy
5The America Cup24 January 1964Edited BBC "ring main" recording, and unedited domestic off-air recording
6Waltzing Matilda5 May 1964[2]Domestic off-air recordings

Commercial release

The complete series has been released on CD as bonus material on The Goon Show Compendium Volume 11 (2015), comprising the best available recordings as detailed above, compiled into complete episodes and remastered by restoration expert Ted Kendall.

gollark: Maybe checking which has the most fuel, and running that.
gollark: No idea, but it'd be cool.
gollark: I'm considering somehow coordinating it with the *other* reactor which burns TBU oxide.
gollark: Otherwise it turns off.
gollark: Basically, the top one transmits the powercell's fullness level (obtained via a computercraft thing since comparators appear to not work) and the bottom one receives that, reads the reactor's buffer level (it was meant to be heat but somehow I just get the RF output buffer level), and if the powercell is below full and the buffer empty it turns the reactor on.

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.