Tamiya connector

A Tamiya connector is a type of DC power connector, commonly used on radio-controlled model vehicle battery packs, drones and chargers.[1] They are also commonly used on airsoft guns.[2]

Tamiya connector

Wiring

The usual wiring has the positive (red) wire running to the terminal with a square profile, and the negative (black) wire running to the half-circle, half-square terminal. This is true for both genders of connector. The female sockets are in a male housing and the male pins are in a female housing. The male pins (female housing) connector is usually on the battery side.

In electrical and electronics engineering, the convention is that gender refers to the metal contact parts of a connector in order to avoid ambiguity. A large number of hobbyist retailers selling these connectors refer to the gender of the plastic housing, which is against convention and can lead to errors.

In some cases, Mini-Tamiya connectors are wired in reverse polarity. This is often the case with airsoft guns, where the square profile terminal is the negative terminal and the rounded terminal is the positive terminal.[3]

Sizes

There are two sizes of Tamiya connectors: standard and mini. The outside dimensions of the standard connector is:

  • 10mm x 6mm x 22mm (about 3/8" x 7/32" x 7/8")

Advantages

A useful feature of the Tamiya connectors is the locking mechanism which prevents accidental disconnection.

The connector physically isolates the positive and negative wires so that the connectors remain safe to use in damp conditions. This makes them safe for use in relatively low-current applications (up to about 15 A) in dirty conditions (for example, model boats or RC cars used outdoors).

gollark: How does that even happen? These are integers. There shouldn't be floating point weirdness.
gollark: I have some JS which *almost* works, except it's *somehow* off by a few percent and it cuts off the bottom of the text.
gollark: Why is it that CSS makes it really easy to do complex layouts and such but there is literally no simple, working, consistent way - even with JS involved - to make a text area automatically fit its contents?!
gollark: Villains should really read the evil overlord list: http://eviloverlord.com/lists/overlord.html
gollark: Most villains in, well, media seem pretty stupid. They're just "ah yes I will be evil for no reason", do stupid things, and get surprised when they fail.

See also

References

  1. ElectriFly: Adapters and Connectors shows converter cables for connectors commonly used in the RC community.
  2. "Battery Junction". Battery Junction. Retrieved 2011-06-22.
  3. "Mini-Tamiya Leads - Component-Shop". Component Shop. Retrieved 2014-08-09.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.