Table tennis at the 2016 Summer Paralympics – Men's team – Class 3

The Men's team table tennis – Class 3 tournament at the 2016 Summer Paralympics[1] in Rio de Janeiro took place during 14–16 September 2016 at Riocentro Pavilion 3. Classes 1-5 were for athletes with a physical impairment that affected their legs, and who competed in a sitting position. The lower the number, the greater the impact the impairment was on an athlete’s ability to compete.

Table tennis
at the XV Paralympic Games
VenueRiocentro Pavilion 3
Dates14–16 September
Competitors8 teams from 8 nations
Medalists
Zhao Ping
Feng Panfeng
Zhai Xiang
 China
Thomas Schmidberger
Thomas Brüchle
 Germany
Yuttajak Glinbancheun
Anurak Laowong
 Thailand

Results

All times are local time in UTC-3.

Competition Bracket

Quarterfinals Semifinals Finals
1  Germany (GER) 3 3
0  Sweden (SWE) 0 0 1  Germany (GER) 3 3
0  Brazil (BRA) 3 3 0  Brazil (BRA) 0 1
3  South Korea (KOR) 2 0 1  Germany (GER) 3 0 2
4  Poland (POL) 1 3 1 2  China (CHN) 0 3 3
0  Thailand (THA) 3 2 3 0  Thailand (THA) 1 0
0  Ukraine (UKR) 0 0 2  China (CHN) 3 3
2  China (CHN) 3 3 Bronze Medal Match
0  Brazil (BRA) 2 0
0  Thailand (THA) 3 3
gollark: POST data isn't in the URL though, it's sent as the body.
gollark: The reason they *do* is probably just consistency with other methods (it would be very annoying if they worked very differently to GET routing-wise) and so requests can be routed to the right handler more easily.
gollark: <@498244879894315027> Why wouldn't (shouldn't?) they have a URL?
gollark: They do have to spin pretty fast. There are sealed helium ones now.
gollark: > The HDD's spindle system relies on air density inside the disk enclosure to support the heads at their proper flying height while the disk rotates. HDDs require a certain range of air densities to operate properly. The connection to the external environment and density occurs through a small hole in the enclosure (about 0.5 mm in breadth), usually with a filter on the inside (the breather filter).[124] If the air density is too low, then there is not enough lift for the flying head, so the head gets too close to the disk, and there is a risk of head crashes and data loss. Specially manufactured sealed and pressurized disks are needed for reliable high-altitude operation, above about 3,000 m (9,800 ft).[125] Modern disks include temperature sensors and adjust their operation to the operating environment. Breather holes can be seen on all disk drives – they usually have a sticker next to them, warning the user not to cover the holes. The air inside the operating drive is constantly moving too, being swept in motion by friction with the spinning platters. This air passes through an internal recirculation (or "recirc") filter to remove any leftover contaminants from manufacture, any particles or chemicals that may have somehow entered the enclosure, and any particles or outgassing generated internally in normal operation. Very high humidity present for extended periods of time can corrode the heads and platters. https://en.wikipedia.org/wiki/Hard_disk_drive#Integrity

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.