T-slot structural framing

T-slot structural framing is a framing system consisting of lengths of square or rectangular extruded aluminum, typically 6105-T5 aluminium alloy, with a T-slot down the centerline of one or more sides. It is also known as 80/20 framing, after the company 80/20, Inc., one of the prominent T-slot framing brands, the name of which is based on the 80/20 principle. While there is no published standard defining this framing system, manufacturers have settled into two categories of product comprising several series each that is generally intercompatible across manufacturers.

Example of 80/20 T-slotted profiles, 10 and 15 series

Profiles

T-slot framing is divided into metric and fractional (imperial) categories. The T-slot is always centered along the long-axis of the piece. Pieces are available in each series with a square cross-section. Rectangular cross sections are available as well which measure x by 2x (where x is the defined width) - e.g. 40mx80mm for 40 series.

Profile
type
Profile
name
Profile
size
fractional 10 series 1"
15 series 1.5"
metric 20 series 20 mm
25 series 25 mm
30 series 30 mm
40 series 40 mm
45 Series 45 mm
gollark: But they're *there* and I can open them.
gollark: Well, it doesn't actually load all the content of every tab, obviously.
gollark: Maybe your laptop is bad.
gollark: Mine loads it, including my several hundred tabs, in about five.
gollark: Except it's the "web runtime".

See also

References

    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.