Swiss Mannlicher M1893 Carbine

The Swiss Mannlicher Model 1893 Carbine was a straight-pull carbine designed by Ferdinand Mannlicher for use by the Swiss cavalry troops.[1] It features a bolt that is almost identical to that of the Mannlicher M1890 Carbine and Mannlicher M1895 rifle aside from the shape of the cocking piece.

Swiss Mannlicher M1893 Carbine
TypeBolt-action carbine rifle
Place of originSwitzerland
Austria-Hungary
Service history
In service1893–1905
Used bySwitzerland
Production history
DesignerFerdinand Mannlicher
Designed1893
ManufacturerSIG, Waffenfabrik Bern
Produced1895–1905
No. built7750
Specifications
Mass3.08 kg (6.8 lb)
Length100 cm (39 in)
Barrel length55 cm (22 in)
Cartridge7.5×53.5mm Swiss (GP90)
ActionStraight-pull bolt action
Muzzle velocity1,835 feet per second (559 m/s)
Effective firing rangefixed sight: 300 m; adjustable sight: 400–1200 m
Feed system6-round detachable box magazine, fed by charger

Design
Detailed drawing.

The Swiss military was in need of a cavalry carbine for their mounted units, so they tried shortening the existing Schmidt–Rubin 1889, but its action proved to be too long to be effective to maneuver with while mounted, so the Swiss government began trials for a new carbine. Two turning-bolt designs were submitted by SIG, a turning-bolt and a straight-pull design were submitted by Ferdinand Mannlicher, a modified Mauser design and a straight-pull design by Vogelsang and Krauser. The Mannlicher straight-pull design was chosen for its compactness.[1]

It was carried by side sling swivels and didn't feature a bayonet mount. These carbines were supposedly hated by the Swiss soldiers as they were hard to field strip and their bolts were hard to disassemble. Many were intentionally smashed during drills, so today combined with their small manufacture number they are quite rare.[1] It was later replaced by the Schmidt–Rubin Model 1905 Cavalry Carbine.

The M1893s were never meant to fire more potent GP11 ammunition and should never be fired using it.

gollark: UPDATE: it works now since apparently I can still `readAll` and `write` strings in `wb`/`rb` mode for some reason.
gollark: I'm having some bizarre issues writing some binary data to files. I'll try and put together a bit of code to demonstrate this with, but basically it seems like `\13` bytes (carriage return) are being replaced with `\10` bytes (line feed). My code is using `"w"` and `"r"` modes instead of binary mode because according to the wiki binary mode doesn't let me use `readAll` and write a whole string; do I need binary mode and is there a way around reading/writing individual bytes for this?
gollark: Wait, an automatic nether portal? Won't that run out of flint and steel or something eventually?
gollark: But I'd be interested to know what application you're working on which uses distance data.
gollark: Pocket computers, turtles or neural interfaces presumably.

References
  1. "1893 Mannlicher Carbine". Retrieved 14 April 2015.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.