Swimming at the 2016 Summer Paralympics – Women's 100 metre breaststroke SB11
The women's 100 metre breaststroke SB11 event at the 2016 Paralympic Games took place on 13 September 2016, at the Olympic Aquatics Stadium. No heats were held.
Women's 100 metre breaststroke SB11 at the XV Paralympic Games | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Venue | Olympic Aquatics Stadium | ||||||||||||
Dates | 13 September 2016 | ||||||||||||
Competitors | 7 from 7 nations | ||||||||||||
Medalists | |||||||||||||
| |||||||||||||
Women's events | |||||
---|---|---|---|---|---|
50 m freestyle | S4 | S5 | S6 | S7 | S8 |
S9 | S10 | S11 | S12 | S13 | |
100 m freestyle | S3 | S5 | S6 | S7 | S8 |
S9 | S10 | S11 | S13 | ||
200 m freestyle | S5 | S14 | |||
400 m freestyle | S6 | S7 | S8 | S9 | S10 |
S11 | S13 | ||||
50 m backstroke | S2 | S3 | S4 | S5 | |
100 m backstroke | S2 | S6 | S7 | S8 | S9 |
S10 | S11 | S12 | S13 | S14 | |
50 m breaststroke | SB3 | ||||
100 m breaststroke | SB4 | SB5 | SB6 | SB7 | SB8 |
SB9 | SB11 | SB13 | SB14 | ||
50 m butterfly | S5 | S6 | S7 | ||
100 m butterfly | S8 | S9 | S10 | S13 | |
150 m medley | SM4 | ||||
200 m medley | SM6 | SM7 | SM8 | SM9 | SM10 |
SM11 | SM13 | SM14 | |||
Freestyle relays | 4 × 100 m (34pts) | ||||
Medley relays | 4 × 100 m (34pts) | ||||
Final
18:52 13 September 2016:[1]
Rank | Lane | Name | Nationality | Time | Notes |
---|---|---|---|---|---|
![]() | 3 | Xiaotong Zhang | ![]() | 1:23.02 | WR |
![]() | 4 | Liesette Bruinsma | ![]() | 1:25.81 | |
![]() | 5 | Maja Reichard | ![]() | 1:26.60 | |
4 | 6 | Yana Berezhna | ![]() | 1:28.04 | |
5 | 2 | Nadia Baez | ![]() | 1:35.51 | |
6 | 7 | Letticia Martinez | ![]() | 1:38.22 | |
7 | 1 | Martina Rabbolini | ![]() | 1:38.81 |
Notes
- "Women's 100m Breaststroke - SB11 - Final". Rio 2016 Paralympic Games. Retrieved 7 October 2016.
gollark: It's not *just* a graph thing. If you had an accurate map of all the network connections it would be a relatively easy thing to route between nodes.
gollark: I heard that general mesh-network routing was extremely hard, so I ignored it and implemented something really stupid instead.
gollark: Without the ID thing, though.
gollark: I mean, my networking thing is effectively a port of rednet, and thus really inefficient and bad, which is probably why it uses so much power?
gollark: Probably, but then I would have had to hook everything to skynet/SPUDNET or something.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.