Superplastic forming and diffusion bonding

Superplastic forming and diffusion bonding (SPF/DB) is a technique allowing to manufacture complex-shaped hollow metallic parts. It combines Superplastic forming (SPF) with a second element "Diffusion Bonding" to create the completed structures.

Principle

Two metal sheets are welded together at their edges, then heated within the confines of a female mould tool.

When the part is hot, an inert gas is injected between the two sheets ; the part becomes hollow to the form of the mould.[1] Parts may be welded in other areas than the edges to give an internal structure as the sheets are blown.

Applications
  • Hollow titanium blades for jet engine.[1]
  • Military aircraft structures such the aft fuselage of the McDonnell Douglas F-15E Strike Eagle.[2] McDonnell Douglas (McDonnell Aircraft Company) developed the production equipment and tooling technology in St. Louis during the mid 1980s through the leadership of engineers Ray Kittelson, Vern Mueller, David Rohe and Duane Jennings.
gollark: AutoBotRobot is currently undergoing extensive development and testing. Feature suggestions?
gollark: What is this "shard"?
gollark: Ah.
gollark: Serenity?
gollark: If I figure out how to make a discord bot in Rust can you add it?

See also

References
  1. Spittle, Peter. "Gas turbine technology" p508, Rolls-Royce plc, 2003. Retrieved: 13 June 2014.
  2. Sabc. "Airframe in General". F-15E.info. Retrieved 2014-06-13.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.