Stripper clip

A stripper clip (also known as a charger or charger clip, especially in British and in Commonwealth military vocabulary) is a speedloader that holds several cartridges (usually between 5 and 10) together in a single unit for easier and faster loading of a firearm magazine.[1] It is called a 'stripper' clip because, after the bolt is opened and the stripper clip is placed in position (generally by placing it in a slot on either the receiver or bolt), the user presses on the cartridges from above, sliding them down and off the clip, thereby "stripping" them off the clip and into the magazine. Stripper clips differ from en bloc clips in that they are not designed to be inserted into the weapon itself, but only to load it or its magazine.

Stripper clip loader for a M16 STANAG detachable magazine

Stripper clips were originally employed in infantry bolt action rifles, such as the Russian Mosin–Nagant, the British Lee–Enfield, and the German Gewehr 98 and its variant the Mauser K98k, the related US M1903 Springfield and many others. Stripper clips were also employed in newer, semi-automatic rifles with internal box magazines, such as the Soviet SKS, and the Egyptian Hakim Rifle.

Currently they are used to top-off detachable box magazines for semi-automatic and automatic rifles. A magazine loader is placed on the lip of the box magazine, the clip is placed inside the loader, and then the rounds are pushed into the magazine.

Use
Stripper clip loading for a 7.92×57mm Mauser Karabiner 98k rifle

It is called a "stripper" clip because, after the bolt is opened and the stripper clip is placed in position (generally by placing it in a slot on either the receiver or bolt), the user presses on the cartridges from above, sliding them down and off the clip, thereby stripping them off the clip and into the magazine.[2] After the magazine is loaded, the stripper clip is removed and set aside for reloading, or simply discarded during combat.

Generally, a weapon that can use a stripper clip for loading can also be loaded one round at a time, while a weapon designed for an en bloc clip cannot be used without the clip.

Depending on the firearm, magazine, and cartridge, stripper clips come in a variety of shapes, some quite complex, though most are either straight or crescent-shaped pieces of stamped metal—usually brass, steel (often blued or parkerized), or plastic.

History

Stripper/charger clips have been used since 1889 (in the form of the Mauser Model 1889), while en bloc clips have been used since roughly the mid-late 1880s. En bloc clips, as used in the M1 Garand as well as the Italian Carcano are designed to be inserted into the magazine itself, essentially a part of the magazine, while stripper clips are intended to load ammo into the magazine while the magazine is intended to load ammo into the chamber. The M1891 Three Line Rifle (aka the first "Mosin-Nagant") utilized stripper clips, however the design was improved upon later, namely by Mauser. Mauser clips are inherently smoother and eject automatically upon closing the bolt, while Mosin-Nagant clips require a special technique to get anywhere near the same efficiency but must be manually removed before you can close the bolt, making it inherently slower. Still, it is faster than reloading with single cartridges. Moreover, once some but not all rounds have been fired Mauser clip format guns are as a rule difficult or impossible to top-up to their maximum capacity again with additional cartridges, which is generally easy with stripper-clip loading weapons.

Stripper clips were originally employed in infantry bolt action rifles, such as the Russian Mosin–Nagant, the British Lee–Enfield, and the German Gewehr 98 and its variant the Mauser K98k, the related US M1903 Springfield and many others.[3] Stripper clips were also employed in newer, semi-automatic rifles with internal box magazines, such as the Soviet SKS and Egyptian Hakim Rifle.[4] Many early semi-automatic pistols also used stripper clips to reload, including the Mannlicher M1894, the Roth–Steyr M1907, and the Mauser C96.

Currently they are used to top-off detachable box magazines for semi-automatic and automatic rifles. A magazine loader is placed on the lip of the box magazine, the clip is placed inside the loader, and then the rounds are pushed into the magazine.

gollark: I can only focus on things with no practical application whatsoever. It's very """convenient""".
gollark: This works because something something linearity.
gollark: If it's written in the "rectangular" form (a + ib), you just differentiate the real and imaginary parts separately.
gollark: And even competent people don't like the ML dependency horrors, so they just use Docker a lot.
gollark: Anything slightly technical scares most users.

See also

References
  1. Walker, Robert E. (2013). Cartridges and Firearm Identification. CRC Press. p. 419. ISBN 978-1-4665-8881-3.
  2. Muramatsu, Kevin (14 July 2014). Gun Digest Guide to Maintaining & Accessorizing Firearms. Iola, Wisconsin: Krause Publications. p. 111. ISBN 978-1-4402-3989-2.
  3. Walter, John (2006). Rifles of the World. Iola, Wisconsin: Krause Publications. p. 346. ISBN 0-89689-241-7.
  4. Sweeney, Patrick (2009). The Gun Digest Book of the AK & SKS: A Complete Guide to Guns, Gear and Ammunition. Iola, Wisconsin: Gun Digest Books. p. 127. ISBN 0-89689-678-1.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.