South Palmerston Loch

South Palmerston Loch or Flush, previously known as Loch of the Hill, lying to the east of the 500 ft Back o'hill Mount. It was one of several small lochs within the Parish of Ochiltree. The loch, lying in a glacial kettle hole, drained into the Lugar Water via the Burnock Water.

South Palmerston Loch
LocationOchiltree, East Ayrshire, Scotland
Coordinates
TypePreviously a freshwater loch
Primary inflowsUnnamed burn, rainfall and runoff
Primary outflowsPalmerston Burn
Basin countriesScotland
SettlementsOchiltree

Cartographic evidence

Blaeu's map of circa 1654 taken from Timothy Pont's map of circa 1600 shows a Loch of the Hill lying near a Jockston, with an outflow running into the Lugar Water after passing through the grounds of the Auchinleck estate.[1]

Roy's map of 1747 records the loch position, with a Bogbrae and Boghead on higher ground to the south.[2] The loch was present in 1857, lying below Back o'hill Farm and mount. Much of the higher land to the south was very marshy at this time.[3] The 1872 OS shows the loch as open water.[4] In 1897 the loch is marked as a curling pond, seasonally flooded and remains so until circa 1910. In the 1920s the loch is shown as a marshy area with no open water, fed by a burn running down from near Ochiltree railway station.[5] The 1950 aerial survey appears to show that the loch had been drained with only a small area of open water present.[6] In the 1990s only a small area of wetland is shown on the OS map.[7]

South Palmerston Loch
The location of South Palmerston Loch, East Ayrshire

Uses

The Royal Caledonian Curling Club records that curling matches took place on the loch in February 1857 and 1860.[8]

Micro-history

Early highways ran close to the loch, as indicated by names such as the nearby Glenconner Farm, 'conaire' being a Gaelic word for "path". There is also a farm called Rottenrow near to Glenconner, possibly derived from 'Route de Roi', or King's Highway.[9]

gollark: I still have a box of spare cables from my build lying around, and the 3.5" HDD trays.
gollark: And sometimes you have proprietary form factors or not enough cables.
gollark: And to replace the CPU you need to swap the cooler and avoid bending pins.
gollark: With very expensive parts and a screwdriver, but I agree generally.
gollark: The hardware.

See also

References
Notes
  1. Blaeu's Map Retrieved : 2011-11-22
  2. Roy's Map retrieved : 2011-11-22
  3. 25 OS Map Retrieved : 2011-11-22
  4. OS Map Retrieved : 2011-11-22
  5. OS Map Retrieved : 2011-11-22
  6. Air photo 2011-11-22
  7. Old Maps Archived 2012-04-30 at the Wayback Machine Retrieved : 2011-11-22
  8. Curling Sites Retrieved : 2011-03-18
  9. Old Roads of Scotland Retrieved : 2011-11-22
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.