Rust converter

Rust converters are chemical solutions or primers that can be applied directly to an iron or iron alloy surface to convert iron oxides (rust) into a protective chemical barrier. These compounds interact with iron oxides, especially iron(III) oxide, converting them into an adherent black layer that is more resistant to moisture and protects the surface from further corrosion. They are sometimes referred to as "rust remover" or "rust killer".

Typical ingredients

Commercial rust converters are water-based and contain two primary active ingredients: tannic acid [1] and an organic polymer. Tannic acid chemically converts the reddish iron oxides into bluish-black ferric tannate, a more stable material.[2] The second active ingredient is an organic solvent such as 2-butoxyethanol (ethylene glycol monobutyl ether, trade name butyl cellosolve) that acts as a wetting agent and provides a protective primer layer in conjunction with an organic polymer emulsion. Some rust converters may contain additional acids to speed up the chemical reaction by lowering the pH of the solution. A common example is phosphoric acid, which additionally converts some iron oxide into an inert layer of ferric phosphate.[3] Most of the rust converters contain special additives.[4] They support the rust transformation and improve the wetting of the surface.

Applied rust converter

Uses

Rust converter is usually applied to objects that are difficult to sand blast, such as vehicles, trailers, fences, iron railings, sheet metal, and the outside of storage tanks. It may also be used to restore and preserve iron-based items of historical importance.[5]

gollark: ?emojistats ❌
gollark: ?emojistats
gollark: I suspect it did not work.
gollark: I did in <#457999277311131649>.
gollark: ?emojistats

See also

References
  1. "Rust Conversion Mechanism".
  2. "Tannic Acid Coating for Rusted Iron Artifacts, formerly published under the title Tannic Acid Treatment – Canadian Conservation Institute (CCI) Notes 9/5 - Canada.ca". www.canada.ca.
  3. Maltby, Susan L. (November 1998). "Rust Converters". Old-House Journal. Archived from the original on 8 May 2001. Retrieved 24 June 2012.
  4. SchwegmannNet.de: Corrosion Protection of Metallic Surfaces. Retrieved 29 October 2019.
  5. "NCPTT - Materials Research Program Begins Rust Converter Study". www.ncptt.nps.gov.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.