Russian Shipyard Number 10

Russian Shipyard No. 10—Shkval (Russian: Акционерного общества «10 ордена Трудового Красного Знамени судоремонтный завод») is located in Polyarny, Murmansk Oblast, Russia, on the outermost western side of the Murmansk Fjord. In the West, it is more often referred to by the name of the town than its official name. As the first nuclear-powered submarines were delivered to the Northern Fleet at the end of the 1950s, the yard was modified for docking and repair of these vessels. As Soviet Navy (and now Russian Navy) nuclear vessels are decommissioned, they are laid up at Polyarny awaiting defueling and disposal.

10 Order of the Red Banner of Labor shipyard
Joint-stock company
IndustryShipbuilding
Founded1935
Headquarters
Polyarny
,
Russia
Revenue$9.52 million[1] (2017)
-$3.46 million[1] (2017)
-$3.57 million[1] (2017)
Total assets$18.5 million[1] (2017)
Total equity$1.15 million[1] (2017)
ParentUnited Shipbuilding Corporation
Websiteao10srz.ru

Around 1970, Shkval was reorganised and partially expanded in order to handle the larger nuclear submarines then coming into service. It now includes tenders, service ships, dry docks, and two covered floating docks, as well as a self-propelled barge with 150-tonne payload, two onshore cranes with lifting capacity of 40 tonnes and 32 tonnes, and two floating cranes with lifting capacity of 30 tonnes and 25 tonnes. The yard employs about 3,000 workers, and covers 41,330 square metres (444,900 sq ft). Its docks total 550 metres (1,800 ft) in length.

In the Tom Clancy novel The Hunt for Red October, the experimental Typhoon-class nuclear submarine Red October departs on its fateful voyage from this shipyard.

In the 2018 action thriller film, Hunter Killer, the president of Russia is seen landing in the shipyard, greeted by a military parade on the docks.

gollark: I expect it will end up being yours fairly rapidly.
gollark: Also, I really hope this proxy is *secured* somehow or there will be *problems*.
gollark: I'll try and explain it better then- the quotas at random.org are *presumably* limiting your access to random bits based on your IP - that is, the IP it gets the requests from, not one you specify, that would be silly.- when using your proxy, the requests are coming from the proxy's IP- thus, you should get the quotas from the *same IP* you're contacting random.org from- in the case of your `curl` thing it works, as you're requesting the quota for the same IP you send requests from- this will not be the case if you attempt to fetch the quota for your computer's real IP when it's accessing random.org through the proxy
gollark: **gollark** is typing...
gollark: *But* that's *invalid* if you're going to use the proxy to contact random.org itself.

References
  1. https://www.kartoteka.ru/card/ff1a7559c1df1d7b081f9e486144d117/e37e0f80825c4a682bb584a3dc406588/.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.