Routing in cellular networks

Network routing in a cellular network deals with the challenges of traditional telephony such as switching and call setup.[1]

Cell sites frequency reuse pattern in Cellular telephone network . See U.S. Patent 4,144,411

Most cellular network routing issues in different cells can be attributed to the multiple access methods used for transmission. The location of each mobile phone must be known to reuse a given band of frequencies in different cells and forms space-division multiple access (SDMA).

Networks

FDMA is one of the multiple access methods used in cellular networks. 50 MHz blocks of communication channel are assigned, which lie in radio frequency range and contain an equal number of uplinks (terminal to base station) and downlinks (base station to terminal).[2] One or more bidirectional channels are carried by 10-90 band pairs. The digital networks additionally make use of either CDMA or TDMA methods.

Handover and roaming

A special service called mobility management provides this application. Terminals (handsets) can move from one place to another during the call and therefore requires the call to be handed over from one channel to another.[3] Soft handover uses the same frequency channel.[4] The same terminals can operate in the same area covered by different service providers, which is known as roaming.[5]

gollark: I am not aware of international laws requiring you to pay vast amounts of money to do research of some sort into housing.
gollark: That is not what I meant. What are they actually DOING?
gollark: What do you mean "make improvements in housing"? I can't say much about this without further context.
gollark: As I SAID, silicon fabrication is literally the most capital-intensive industry in existence.
gollark: I mean, more macroscale parts, but easier to make.

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.