Rolling straight-edge

The rolling straight-edge (also rolling straightedge or planograph) is an instrument used to measure the surface regularity of roads and similar structures such as airport runways. It consists of a straightedge of a fixed distance mounted on wheels with a sensor at the centrepoint measuring deviation in height. It is rolled along the road surface and set to specific trigger levels which can be logged automatically or by means of an audible alarm. The rolling straight-edge was developed by the British Road Research Laboratory to replace earlier manual methods of measurement using rulers. It has been used by several countries and remains in use in the United Kingdom, Germany and Taiwan.

Generic principle of the apparatus:
1 - Road surface
2 - Road wheels
3 - Straight-edge
4 - Measuring wheel
5 - Deviation indicator gauge
6 - Direction of travel

Description

The rolling straight-edge is a piece of equipment used to measure the surface regularity of roads and similar structures, such as airport runways.[1][2] The equipment consists of a long beam (the straight edge) mounted on wheels with a measuring wheel at the midpoint. The measuring wheel moves up and down according to depressions in the road surface, a sensor measures the vertical movement, which is recorded on a graduated scale. The equipment is rolled longitudinally down the surface being measured.[3] The equipment can be fitted with a bell or buzzer that alerts the user when a set limit of vertical deviation is breached.[1] The recording of data, typically chainage and magnitude or number of deviations, can be done by hand, though some units contain automated dataloggers.[1] A smoothness index for the road can be derived from a standard deviation analysis of the results.[4]

As an example of a unit the Road Research Laboratory rolling straight-edge measures 3 metres (9.8 ft) in length with the sensor mounted at the midpoint. The unit was mounted on forty 127-millimetre (5.0 in) diameter road wheels mounted in pairs 152 millimetres (6.0 in) apart. The whole unit is dismantlable into three parts for transport and the frame was made of glass fibre. it was designed to be pulled along the road by hand at a slow walking pace, approximately 1–2 kilometres per hour (0.6–1 mph).[3]

History
California rolling straight-edge
Rolling straight-edge

The rolling straight-edge is one of the earliest methods of measuring surface regularity.[5] It was a development of an earlier technique of measuring road depressions manually with a ruler under a 10 feet (3.0 m) straight-edge.[4][6] This method had later been developed by the British Department of Transport with the use of graduated wedges which were pushed under the ruler to measure the height, but remained a slow and cumbersome technique.[7] The government's Road Research Laboratory developed the rolling straight-edge as a quicker method.[6] The original design only had wheels at either end of the straight edge but this proved liable to error from small bumps so additional wheels were added.[4]

The current British practice as set out in its national standards, the Specification for Highway Works, is for the rolling straight-edge to be used for checking surface regularity of all sections of road longer than 75 metres (246 ft) in length.[8] The manual graduated wedge method is retained for use on shorter sections of road or where the rolling straight-edge proves impractical to use.[6] The specification sets out the number of deviations greater than 4 millimetres (0.16 in) and greater than 7 millimetres (0.28 in) that are permitted per 300 metres (980 ft) section of carriageway. The specification allows for two levels of tolerance, for category A roads and category B roads, with the client specifying which is to be used. Twice as many deviations are permitted on category B roads. No deviation greater than 10 millimetres (0.39 in) is permitted.[8]

In the United States 10 feet (3.0 m) rolling straight-edges have previously featured in some state highways specifications.[9] Devices as long as 12 feet (3.7 m) and 6 metres (20 ft) have also been used.[10][11] The National Academies of Sciences, Engineering, and Medicine's journal Transportation Research Record in 1996 described the instruments as "cumbersome devices with limited production capability" and noted that they could miss deviations with a wavelength of half the length of the straight-edge, due to the fixed points of reference at either end.[10] By 2001 36 US state departments of transport were specifying the use of profilographs to derive a profile index as a measure of surface regularity, rather than rolling straight-edges.[12][4] The profilograph takes a series of laser measurements of the road surface along a defined track.[13]

The Taiwan Area National Expressway Engineering Bureau specification requires a rolling straight-edge as a means of measuring surface regularity. It specifies a maximum of 3 millimetres (0.12 in) of deviation over any 3 metres (9.8 ft) length, but contractors have criticised this as being unachievable.[4] In Germany the equipment, in use since 1960, is known as a planograph and a straight-edge with 4 metres (13 ft) length is used.[14][15]

gollark: Well, HTTP/3.
gollark: Although it does mean it's reachable over QUIC, which is... good?
gollark: I have to use nginx due to port assignments and also TLS.
gollark: Basically, there were two problems:- I did not copy the blattidus proxy config to osmarks.net from osmarks.tk- the service worker was not made to not cache blattidus datæ
gollark: Try ctrl+F5ing, it was accidentally cached.

References
  1. Hunter, Robert N. (2000). Asphalts in Road Construction. Thomas Telford. p. 320. ISBN 978-0-7277-2780-0.
  2. Al-Qadi, Imad L. (2006). Airfield and Highway Pavements: Meeting Today's Challenges with Emerging Technologies : Proceedings of the 2006 Airfield and Highway Pavement Specialty Conference, April 30-May 3, 2006, Atlanta, Georgia. American Society of Civil Engineers. p. 749. ISBN 978-0-7844-0838-4.
  3. Young, J C (1977). "Calibration, Maintenance and use of the Rolling Straightedge" (PDF). Transport and Road Research Laboratory. Supplementary Report 290: 2.
  4. Stroup-Gardiner, Mary; Materials, American Society for Testing and (2003). Constructing Smooth Hot Mix Asphalt (HMA) Pavements. ASTM International. p. 105. ISBN 978-0-8031-3460-7.
  5. Transit Pricing and Performance. Transportation Research Board, National Research Council. 1986. p. 27. ISBN 978-0-309-04072-3.
  6. Young, J C (1977). "Calibration, Maitenance and use of the Rolling Straightedge" (PDF). Transport and Road Research Laboratory. Supplementary Report 290: 1.
  7. World Survey of Current Research and Development on Roads and Road Transport. International Road Federation. 1973. p. 322.
  8. "Series 700 Road Pavements - General" (PDF). Manual of Contact Documents for Highway Works. Volume 1: Specification for Highway Works: 3. Retrieved 12 July 2020.
  9. Standard Specifications for Road and Bridge Construction. State Road Department. 1966. p. 284.
  10. Transportation Research Record. Transportation Research Board, Commission on Sociotechnical Systems, National Research Council, National Academy of Sciences. 1996. p. 84. ISBN 978-0-309-05914-5.
  11. Younger, Krey; Hicks, Russell G.; Gower, Jeff (1994). Evaluation of Porous Pavements Used in Oregon: Final Report. Engineering Services Section, Research Unit, Oregon Department of Transportation. p. B-32.
  12. Rufino, Dulce; BaRaKa, Kenyatta; Darter, Michael I. (2001). Development of a Bridge Smoothness Specification for Illinois DOT. Illinois Department of Transporattion. p. 55.
  13. Losa, Massimo; Papagiannakis, Tom (2014). Sustainability, Eco-efficiency, and Conservation in Transportation Infrastructure Asset Management. CRC Press. p. 370. ISBN 978-1-138-00147-3.
  14. Dhir, Ravindra; Dyer, Thomas (1996). Concrete in the Service of Mankind: Concrete for environment protection and enhancement. CRC Press. p. 278. ISBN 978-0-419-21450-2.
  15. Report. Highway Research Board of the Division of Engineering and Industrial Research, National Academy of Sciences, National Research Council. 1964. p. 104.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.