Rayleigh interferometer

The Rayleigh interferometer employs two beams of light from a single source, and determines the difference in optical path length between the two paths using interference between the two beams when they are recombined following traversal of the paths. An example is shown in the figure.[1] Light from a source (top) is collimated by a lens and split into two beams using slits. The beams are sent through two different paths and pass through compensating plates. They are brought to a focus by a second lens (bottom) where an interference pattern is observed to determine the optical path difference in terms of wavelengths of the light.

Collimated coherent light passing through two tubes with different refraction index gases, then an imaging lens creates the interferogram.

Advantages and disadvantages

The advantage of the Rayleigh interferometer is its simple construction. Its drawbacks are (i) it requires a point or line source of light for good fringe visibility, and (ii) the fringes must be viewed with high magnification.[2]

gollark: Also the lack of pattern matching.
gollark: I too enjoy segfaults.
gollark: Since Rust good.
gollark: For performance.
gollark: Maybe I should make this in glorious, optimal Rust.

See also

Notes

References

  • Busch, Kenneth W.; Busch, Marianna A. (1990). "§6.6.5 The Rayleigh interferometer". Multielement detection systems for spectrochemical analysis, Volume 107. Wiley-Interscience. p. 231. ISBN 0-471-81974-3.CS1 maint: ref=harv (link)
  • Hariharan, P. (2007). "§3.3: The Rayleigh interferometer". Basics of interferometry (2nd ed.). Academic Press. p. 15. ISBN 0123735890.CS1 maint: ref=harv (link)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.