RNAS Machrihanish (HMS Landrail)

Royal Naval Air Station Machrihanish (HMS Landrail), is a former Royal Navy air station, close to Campbeltown in Argyll and Bute, Scotland.

Location

Located 3 miles (5 km) west of Campbeltown on the western side of the Kintyre Peninsula, Machrihanish is a former RAF air station, notable for its weather forecasts. The base had an exceptionally long runway (3049m / 10,000 feet), together with a large number of technical buildings and accommodation.

History

Machrihanish was established as a naval air station in 1916, operating maritime patrol aircraft and airships until 1918.[1] A new airfield opened on 15 June 1941 as Strabane Naval Air Station, and named HMS Landrail, becoming RNAS Machrihanish later in the month and operated until 1946.[2] The old airfield became HMS Landrail II.

The Air Station was re-activated again during the Korean War for training purposes. Between 1960–62, the base was reconstructed and the current runway built. Thereafter the base developed in relation to NATO requirements during the Cold War, and was the focus of anti-submarine operations with US-controlled nuclear depth charges.[1] A US Navy SEAL unit is also said to have been based here.[1] £10 million was spent to upgrade the station in the early 1990s, keeping it on a care-and-maintenance basis to provide a runway for emergencies or in the event of conflict.[1] The base remained a UK and NATO military base until 1997.

Campbeltown Airport

Between the wars a commercial aerodrome was established and is still operated by the government-owned Highlands and Islands Airports Limited operates with IATA location code "GQJ".[3] It uses the same single runway which, at 3049m (10,000 feet), is the longest in Scotland.[3] The terminal building are at the south-eastern end. There are scheduled flights to Glasgow.

Units

A number of units were here at some point:[4]

gollark: Using hypothetical assembly syntax I haven't actually implemented:```# start of memory to add kittens to(add r1 r0 0x1000) # maybe there would be nice dedicated syntax for "set register" actually# end of kittenized region(add r2 r0 0x1600)(label loop (add r3 r0 40) (poke r3 r1 0) (add r3 r0 94) (poke r3 r1 1) # and so on (add r1 r1 8) (jlt r1 r2 loop))```
gollark: To create RAM kittens, all you need to do is `ADD` the ASCII value of each character into a temporary register, `POKE` them into the right memory location (using the per-instruction `POKE` offset, probably), and then do that in a loop.
gollark: I should probably implement arithmetic instructions then a basic assembler, I guess, because hand-writing machine code is unpleasant.
gollark: What? No. This doesn't really need jumps, except possibly to run it repeatedly.
gollark: Well, it would just be a bunch of POKEs at consecutive memory addresses.

References
  1. "Machrihanish Air Station". Gazetteer for Scotland. Retrieved 5 August 2009.
  2. "RAF Machrihanish". Secret Scotland. Retrieved 5 August 2009.
  3. "Campbeltown Airport". Gazetteer for Scotland. Retrieved 5 August 2009.
  4. "Machrihanish (Campbeltown) (Strabane)". Airfields of Britain Conservation Trust. Retrieved 14 January 2016.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.