RCAF Station Weyburn

RCAF Station Weyburn
Weyburn, Saskatchewan
Near Weyburn, Saskatchewan in Canada
RCAF Station Weyburn
Coordinates49°42′N 103°48′W
Site information
OperatorFormerly Royal Canadian Air Force
Airfield information
IdentifiersIATA: none, ICAO: none
Elevation1,919 ft (585 m) AMSL
Runways
Direction Length and surface
12/30 2,900 ft (880 m) Hard Surfaced
12/30 3,300 ft (1,000 m) Hard Surfaced
6/24 3,000 ft (910 m) Hard Surfaced
6/24 3,400 ft (1,000 m) Hard Surfaced
17/35 2,900 ft (880 m) Hard Surfaced
17/35 3,300 ft (1,000 m) Hard Surfaced
Airfields

RCAF Station Weyburn

The aerodrome was constructed in 1941 by the Royal Canadian Air Force (RCAF) as part of the British Commonwealth Air Training Plan. The Station was home to No. 41 Service Flying Training School and during its operation graduated 1,055 pilots and recorded more than 180,000 hours of flight time before being abandoned on 30 June 1944.[1][2]

Aerodrome information

In approximately 1942 the aerodrome was listed as RCAF Aerodrome - Weyburn, Saskatchewan at 49°42′N 103°48′W with a variation of 17 degrees east and elevation of 1,919 ft (585 m). Six runways were listed as follows: [3]

Runway Name Length Width Surface
12/30 2,900 ft (880 m) 100 ft (30 m) Hard Surface
12/30 3,300 ft (1,000 m) 100 ft (30 m) Hard Surface
6/24 3,000 ft (910 m) 100 ft (30 m) Hard Surface
6/24 3,400 ft (1,000 m) 100 ft (30 m) Hard Surface
17/35 2,900 ft (880 m) 100 ft (30 m) Hard Surface
17/35 3,300 ft (1,000 m) 100 ft (30 m) Hard Surface

Relief landing field – Halbrite

A Relief Landing field for RCAF Station Weyburn was located approximately 19 mi (31 km) south-east. The site was located south of the village of Halbrite, Saskatchewan. In approximately 1942 the aerodrome was listed as RCAF Aerodrome - Halbrite, Saskatchewan at 49°28′N 103°34′W with a variation of 16 degrees east and an elevation of 1,900 ft (580 m). The Relief field was laid out in a triangle with three runways, detailed in the following table:[4]

Runway Name Length Width Surface
5/23 2,700 ft (820 m) 150 ft (46 m) Hard Surface
17/35 2,700 ft (820 m) 150 ft (46 m) Hard Surface
11/29 2,700 ft (820 m) 150 ft (46 m) Hard Surface

A review of Google Maps satellite imagery on 8 June 2018 shows no details indicating an airfield at the listed coordinates.

Relief landing field – Ralph

A Relief Landing field for RCAF Station Weyburn was located approximately 12 mi (19 km) south-east. The site was located approximately 2 mi (3.2 km) south of the unincorporated community of Ralph, Saskatchewan. In approximately 1942 the aerodrome was listed as RCAF Aerodrome - Ralph, Saskatchewan at 49°33′N 103°41′W with a variation of 16 degrees east and an elevation of 1,880 ft (570 m). The Relief field was detailed as "Turf - All way field - Servicable" and was drawn as a triangular layout with no dimensional information.[5] A review of Google Maps satellite imagery on 8 June 2018 shows no details indicating an airfield at the listed coordinates.

gollark: Wait, is this running out of CC?
gollark: YAFSS is great and will **not** (*not*) install potatOS on your computer.
gollark: You could extend the potatosandbox a bit, even.
gollark: I see. Why that and not just one line of `loadstring`?
gollark: Please share kode for luainterpreter.

References
  1. "Services > Airport". City of Weyburn. Retrieved 2011-07-16.
  2. Greenhous, Brereton; Norman Hillmer (Fall 1981). "The Impact of the British Commonwealth Air Training Plan on Western Canada: Some Saskatchewan Case Studies". Journal of Canadian Studies. 16 (3): 133-144Project Muse.
  3. Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 68.
  4. Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 43.
  5. Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 58.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.