Population impact measure

Population impact measures (PIMs) are biostatistical measures of risk and benefit used in epidemiological and public health research. They are used to describe the impact of health risks and benefits in a population, to inform health policy.[1][2][3]

Frequently used measures of risk and benefit identified by Jerkel, Katz and Elmore, [4] describe measures of risk difference (attributable risk), rate difference (often expressed as the odds ratio or relative risk), population attributable risk (PAR), and the relative risk reduction, which can be recalculated into a measure of absolute benefit, called the number needed to treat. Population Impact Measures are an extension of these statistics, as they are measures of absolute risk at the population level, which are calculations of number of people in the population who are at risk to be harmed, or who will benefit from Public Health interventions.

They are measures of absolute risk and benefit, producing numbers of people who will benefit from an intervention or be at risk from a risk factor within a particular local or national population.[5][6][7][8][9][10] They provide local context to previous measures, allowing policy-makers to identify and prioritise the potential benefits of interventions on their own population.[11][12] They are simple to compute, and contain the elements to which policy-makers would have to pay attention in the commissioning or improvement of services. They may have special relevance for local policy-making. They depend on the ability to obtain and use local data, and by being explicit about the data required may have the added benefit of encouraging the collection of such data.

The measures

To describe the impact of preventive and treatment interventions, the number of events prevented in a population (NEPP) is defined as "the number of events prevented by the intervention in your population over a defined time period". NEPP extends the well-known measure number needed to treat (NNT) beyond the individual patient to the population. To describe the impact of a risk factor on causing ill health and disease the Population Impact Number of Eliminating a Risk factor (PIN − ER − t) is defined as "the potential number of disease events prevented in a population over the next t years by eliminating a risk factor". The PIN − ER − t extends the well-known population attributable risk (PAR) to a particular population and relates it to disease incidence, converting the PAR from a measure of relative to absolute risk.

The components for the calculations are as follows: population denominator (size of the population); proportion of the population with the disease; proportion of the population exposed to the risk factor or the incremental proportion of the diseased population eligible for the proposed intervention (the latter requires the actual or estimated proportion who are currently receiving the interventions ‘subtracted’ from best practice goal from guidelines or targets, adjusted for likely compliance with the intervention); baseline risk – the probability of the outcome of interest in this or similar populations; and relative risk of outcome given exposure to a risk factor or relative risk reduction associated with the intervention.

Number of events prevented in your population; NEPP

The formula is

${\displaystyle {\text{NEPP}}=N\times P_{d}\times P_{e}\times r_{u}\times {\text{RRR}}}$

where

• N = population size,
• P_d = prevalence of the disease,
• P_e = proportion eligible for treatment,
• r_u = risk of the event of interest in the untreated group or baseline risk over appropriate time period (this can be multiplied by life expectancy to produce life-years),
• RRR = relative risk reduction associated with treatment.

In order to reflect the incremental effect of changing from current to ‘best’ practice, and to adjust for levels of compliance, the proportion eligible for treatment, P_e, is ${\textstyle (P_{b}-P_{t})P_{c}}$, where P_t is the proportion currently treated, P_b is the proportion that would be treated if best practice were adopted, and P_c is the proportion of the population who are compliant with the intervention.

You can calculate the NEPP and its confidence intervals at this page on the population health decision support & simulation site.

[Note: number needed to treat (NNT): 1/(baseline risk x relative risk reduction)]

Population impact number of eliminating a risk factor; PIN − ER − t

The formula is

${\displaystyle {\text{PIN}}-{\text{ER}}-t=NI_{p}\cdot {\text{PAR}}}$

where

• N is the number of people in the population;
• I_p is the baseline risk of the outcome of interest in the population as a whole;
• t is the amount of time over which the outcome is measured.

The PAR/F, population attributable risk (or fraction), is calculated for two or multiple strata. The basic formula to compute the PAR for dichotomous variables is

${\displaystyle {\text{PAR}}=P_{e}{\frac {{\text{RR}}-1}{1+P_{e}({\text{RR}}-1)}}}$

where

• P_e is the prevalence of the population within each income stratum as the exposure, and
• RR is the prevalence of risk factors in each stratum relative to the highest income fifth.

This is modified where there are multiple strata to:

${\displaystyle {\text{PAR}}={\frac {P_{e1}({\text{RR}}_{1}-1)+P_{e2}({\text{RR}}_{2}-1)+P_{e3}({\text{RR}}_{3}-1)+\cdots }{1+P_{e1}({\text{RR}}_{1}-1)+P_{e2}({\text{RR}}_{2}-1)+P_{e3}({\text{RR}}_{3}-1)+\cdots }}}$

You can calculate the PIN − ER − t and its confidence intervals at this page on the population health decision support & simulation site.

References

1. Heller, R. F; Dobson, AJ (2000). "Disease impact number and population impact number: population perspectives to measures of risk and benefit". BMJ. 321 (7266): 950–3. doi:10.1136/bmj.321.7266.950. PMC 1118742. PMID 11030691.
2. Heller, RF; Edwards, R; McElduff, P (2003). "Implementing guidelines in primary care: can population impact measures help?". BMC Public Health. 3: 7. doi:10.1186/1471-2458-3-7. PMC 149228. PMID 12542840.
3. Heller, R. F; Buchan, I; Edwards, R; Lyratzopoulos, G; McElduff, P; St Leger, S (2003). "Communicating risks at the population level: application of population impact numbers". BMJ. 327 (7424): 1162–5. doi:10.1136/bmj.327.7424.1162. PMC 261823. PMID 14615346.
4. Jekel JF, Katz DL, Elmore JG Epidemiology, biostatistics, and preventive medicine: Chapter 6 Assessment of risk and benefit in epidemiologic studies Elsevier Health Sciences, 2001
5. Torun, P.; Heller, R. F.; Verma, A. (2008). "Potential population impact of changes in heroin treatment and smoking prevalence rates: using Population Impact Measures". The European Journal of Public Health. 19 (1): 28–31. doi:10.1093/eurpub/ckn103. PMID 19001458.
6. Heller, Richard F; Gemmell, Islay; Edwards, Richard; Buchan, Iain; Awasthi, Shally; Volmink, James A (2006). "Prioritising between direct observation of therapy and case-finding interventions for tuberculosis: use of population impact measures". BMC Medicine. 4: 35. doi:10.1186/1741-7015-4-35. PMC 1764027. PMID 17181867.
7. Heller, RF; Gemmell, I; Patterson, L (2006). "Helping to prioritise interventions for depression and schizophrenia: use of Population Impact Measures". Clinical Practice and Epidemiology in Mental Health. 2: 3. doi:10.1186/1745-0179-2-3. PMC 1475571. PMID 16553956.
8. Gemmell, I; Heller, RF; McElduff, P; Payne, K; Butler, G; Edwards, R; Roland, M; Durrington, P (2005). "Population impact of stricter adherence to recommendations for pharmacological and lifestyle interventions over one year in patients with coronary heart disease". Journal of Epidemiology and Community Health. 59 (12): 1041–6. doi:10.1136/jech.2005.035717. PMC 1732977. PMID 16286491.
9. Gemmell, I; Heller, RF; Payne, K; Edwards, R; Roland, M; Durrington, P (2006). "Potential population impact of the UK government strategy for reducing the burden of coronary heart disease in England: comparing primary and secondary prevention strategies". Quality & Safety in Health Care. 15 (5): 339–43. doi:10.1136/qshc.2005.017061. PMC 2565818. PMID 17074870.
10. Syed AM, Talbot-Smith A, Gemmell I. The use of epidemiological measures to estimate the impact of primary prevention interventions on CHD, stroke and cancer outcomes: experiences from Herefordshire, UK. J Epidemiol Glob Health. 2012 Sep;2(3):111-24.
11. Chamnan, P; Simmons, RK; Khaw, KT; Wareham, NJ; Griffin, SJ (2010). "Estimating the population impact of screening strategies for identifying and treating people at high risk of cardiovascular disease: modelling study". BMJ. 340: c1693. doi:10.1136/bmj.c1693. PMC 2859321. PMID 20418545.
12. Heller, RF; Gemmell, I; Wilson, EC; Fordham, R; Smith, RD (2006). "Using economic analyses for local priority setting : the population cost-impact approach". Applied Health Economics and Health Policy. 5 (1): 45–54. PMID 16774292.