Palmqvist method
The Palmqvist method, or the Palmqvist toughness test, (after Sven Robert Palmqvist) is a common method to determine the fracture toughness for cemented carbides. In this case, the materials fracture toughness is represented by the critical stress intensity factor KIc.[2]
| Materials testing | |
|---|---|
| Palmqvist method | |
 Determined crack lengths from a Vickers indention. | |
| Technical information | |
| Searched property | Fracture toughness |
| Year developed | 1962[1] |
| Practical use | Determination of the fracture toughness for cemented carbides. |
| Website ISO-standard | ISO 28079:2009, Palmqvist toughness test |
Approach
The Palmqvist-method uses the lengths of the cracks from a number of Vickers indentions to determine the fracture toughness. The Palmqvist fracture toughness is given by:[2]
- with the unit MPa.
Where HV is the Vickers hardness in N/mm2 (or MPa) (i.e. 9.81 x numerical HV) with P (N) indentation load (typically 30 kgf is used) and T is the total crack length (mm) from the indenter.
Notes
- S. Palmqvist, Occurrence of crack formation during Vickers indentation as a measure of the toughness of hard materials, Arch Eisenhuettenwes, 33 (1962) 629-333.
- Roebuck, Bryan; Bennett, Eric; Lay, Lewis; Morrell, Roger (2008). "Palmqvist Toughness for Hard and Brittle Materials" (PDF). National Physical Laboratory. Retrieved 15 April 2020.
gollark: It's more complex than that. I checked.
gollark: It is more complicated and thus more brittle.
gollark: RDanny has some complicated apiotimer setup, ABR just scans over its entire list once every minute using SQL™.
gollark: No complaining about slightly inaccurate times.
gollark: ++help remind
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.