PL-3

PL-3 or POS-PHY Level 3 is a network protocol. It is the name of the interface that the Optical Internetworking Forum's SPI-3 Interoperability Agreement is based on. It was proposed by PMC-Sierra to the Optical Internetworking Forum and adopted in June 2000. The name means Packet Over SONET Physical layer level 3. PL-3 was developed by PMC-Sierra in conjunction with the SATURN Development Group.

The name is an acronym of an acronym of an acronym as the P in PL stands for "POS-PHY" and the S in POS-PHY stands for "SONET" (Synchronous Optical Network). The L in PL stands for "Layer".

Context

There are two broad categories of chip-to-chip interfaces. The first, exemplified by PCI-Express and HyperTransport, supports reads and writes of memory addresses. The second broad category carries user packets over 1 or more channels and is exemplified by the IEEE 802.3 family of Media Independent Interfaces and the Optical Internetworking Forum family of System Packet Interfaces. Of these last two, the family of System Packet Interfaces is optimized to carry user packets from many channels. The family of System Packet Interfaces is the most important packet-oriented, chip-to-chip interface family used between devices in the Packet over SONET and Optical Transport Network, which are the principal protocols used to carry the internet between cities.

Applications

It was designed to be used in systems that support OC-48 SONET interfaces . A typical application of PL-3 (SPI-3) is to connect a framer device to a network processor. It has been widely adopted by the high speed networking marketplace.

Technical details

The interface consists of (per direction):

  • 32 TTL signals for the data path
  • 8 TTL signals for control
  • one TTL signal for clock
  • 8 TTL signals for optional additional multi-channel status

There are several clocking options. The interface operates around 100 MHz. Implementations of SPI-3 (PL-3) have been produced which allow somewhat higher clock rates. This is important when overhead bytes are added to incoming packets.

PL-3 in the marketplace

PL-3 and SPI-3 were highly successful interfaces with many semiconductor devices produced to it.

gollark: Interesting. I don't know optics.
gollark: Ah, but what's the source like?
gollark: It stands for Laser Amplification Sasfopjafiohafiohafjiasbfbashfkbashkfbakhj Easorjhauiorhasuiorhasirb iaR aosrhjajifhasjifasifafs.
gollark: Lazer is not an acronym. Laser is, however.
gollark: I think you should be less patient and more fleeing incoming bee lasers, but sure.

See also
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.