One-class classification

In machine learning, one-class classification (OCC), also known as unary classification or class-modelling, tries to identify objects of a specific class amongst all objects, by primarily learning from a training set containing only the objects of that class,[1] although there exist variants of one-class classifiers where counter-examples are used to further refine the classification boundary. This is different from and more difficult than the traditional classification problem, which tries to distinguish between two or more classes with the training set containing objects from all the classes. Examples include the monitoring of helicopter gearboxes,[2][3][4] motor failure prediction,[5] or the operational status of a nuclear plant as 'normal':[6] In this scenario, there are few, if any, examples of catastrophic system states; only the statistics of normal operation are known.

While many of the above approaches focus on the case of removing a small number of outliers or anomalies, one can also learn the other extreme, where the single class covers a small coherent subset of the data, using an information bottleneck approach.[7]

Overview

The term one-class classification (OCC) was coined by Moya & Hush (1996)[8] and many applications can be found in scientific literature, for example outlier detection, anomaly detection, novelty detection. A feature of OCC is that it uses only sample points from the assigned class, so that a representative sampling is not strictly required for non-target classes.[9]

Introduction

The hypersphere containing the target data having center a and radius R. Objects on the boundary are support vectors, and two objects lie outside the boundary having slack greater than 0.

SVM based one-class classification (OCC) relies on identifying the smallest hypersphere (with radius r, and center c) consisting of all the data points.[10] This method is called Support Vector Data Description (SVDD). Formally, the problem can be defined in the following constrained optimization form,

$${\displaystyle \min _{r,c}r^{2}{\text{ subject to, }}||\Phi (x_{i})-c||^{2}\leq r^{2}\;\;\forall i=1,2,...,n}$$

However, the above formulation is highly restrictive, and is sensitive to the presence of outliers. Therefore, a flexible formulation, that allow for the presence of outliers is formulated as shown below,

${\displaystyle \min _{r,c,\zeta }r^{2}+{\frac {1}{\nu n}}\sum _{i=1}^{n}\zeta _{i}}$

${\displaystyle {\text{subject to, }}||\Phi (x_{i})-c||^{2}\leq r^{2}+\zeta _{i}\;\;\forall i=1,2,...,n}$

From Karush-Kuhn-Tucker (KKT) optimality conditions, we get

${\displaystyle c=\sum _{i=1}^{n}\alpha _{i}\Phi (x_{i}),}$

where the ${\displaystyle \alpha _{i}}$'s are the solution to the following optimization problem:

${\displaystyle \max _{\alpha }\sum _{i=1}^{n}\alpha _{i}\kappa (x_{i},x_{i})-\sum _{i,j=1}^{n}\alpha _{i}\alpha _{j}\kappa (x_{i},x_{j})}$

subject to, ${\displaystyle \sum _{i=1}^{n}\alpha _{i}=1{\text{ and }}0\leq \alpha _{i}\leq {\frac {1}{\nu n}}{\text{for all }}i=1,2,...,n.}$

The introduction of kernel function provide additional flexibility to the One-class SVM (OSVM) algorithm.[11]

PU learning

A similar problem is PU learning, in which a binary classifier is learned in a semi-supervised way from only positive and unlabeled sample points.[12]

In PU learning, two sets of examples are assumed to be available for training: the positive set ${\displaystyle P}$ and a mixed set ${\displaystyle U}$, which is assumed to contain both positive and negative samples, but without these being labeled as such. This contrasts with other forms of semisupervised learning, where it is assumed that a labeled set containing examples of both classes is available in addition to unlabeled samples. A variety of techniques exist to adapt supervised classifiers to the PU learning setting, including variants of the EM algorithm. PU learning has been successfully applied to text,[13][14][15] time series,[16] bioinformatics tasks,[17] and Remote-Sensing Data.[18]

Approaches

Several approaches have been proposed to solve one-class classification (OCC). The approaches can be distinguished into three main categories, density estimation, boundary methods, and reconstruction methods.[6]

Density estimation methods

Density estimation methods rely on estimating the density of the data points, and set the threshold. These methods rely on assuming distributions, such as Gaussian, or a Poisson distribution. Following which discordancy tests can be used to test the new objects. These methods are robust to scale variance.

Gaussian model[19] is one the simplest method to create one-class classifiers. Due to Central Limit Theorem (CLT),[20] these methods work best when large number of samples are present, and they are perturbed by small independent error values. The probability distribution for a d-dimensional object is given by:

${\displaystyle p_{\mathcal {N}}(x;\mu$ ;\Sigma )={\frac {1}{(2\pi )^{\frac {d}{2}}|\Sigma |^{\frac {1}{2}}}}\exp\{-{\frac {1}{2}}(z-\mu )^{T}\Sigma ^{-1}(z-\mu )\}}

Where, ${\displaystyle \mu }$ is the mean and ${\displaystyle \Sigma }$ is the covariance matrix. Computing the inverse of covariance matrix (${\displaystyle \Sigma ^{-1}}$) is the costliest operation, and in the cases where the data is not scaled properly, or data has singular directions pseudo-inverse ${\displaystyle \Sigma ^{+}}$is used to approximate the inverse, and is calculated as ${\displaystyle \Sigma ^{T}(\Sigma \Sigma ^{T})^{-1}}$.[21]

Boundary methods

Boundary methods focus on setting boundaries around a few set of points, called target points. These methods attempt to optimize the volume. Boundary methods rely on distances, and hence are not robust to scale variance. K-centers method, NN-d, and SVDD are some of the key examples.

K-centers

In K-center algorithm,[22] ${\displaystyle k}$ small balls with equal radius are placed to minimize the maximum distance of all minimum distances between training objects and the centers. Formally, the following error is minimized,

${\displaystyle \varepsilon _{k-center}=\max _{i}(\min _{k}||x_{i}-\mu _{k}||^{2})}$

The algorithm uses forward search method with random initialization, where the radius is determined by the maximum distance of the object, any given ball should capture. After the centers are determined, for any given test object ${\displaystyle z}$ the distance can be calculated as,

${\displaystyle d_{k-centr}(z)=\min _{k}||z-\mu _{k}||^{2}}$

Reconstruction methods

Reconstruction methods use prior knowledge and generating process to build a generating model that best fits the data. New objects can be described in terms of a state of the generating model. Some examples of reconstruction methods for OCC are, k-means clustering, learning vector quantization, self-organizing maps, etc.

Applications

Document classification

The basic Support Vector Machine (SVM) paradigm is trained using both positive and negative examples, however studies have shown there are many valid reasons for using only positive examples. When the SVM algorithm is modified to only use positive examples, the process is considered one-class classification. One situation where this type of classification might prove useful to the SVM paradigm is in trying to identify a web browser’s sites of interest based only off of the user’s browsing history.

Biomedical studies

One-class classification can be particularly useful in biomedical studies where often data from other classes can be difficult or impossible to obtain. In studying biomedical data it can be difficult and/or expensive to obtain the set of labeled data from the second class that would be necessary to perform a two-class classification. A study from The Scientific World Journal found that the typicality approach is the most useful in analysing biomedical data because it can be applied to any type of dataset (continuous, discrete, or nominal).[23] The typicality approach is based on the clustering of data by examining data and placing it into new or existing clusters.[24] To apply typicality to one-class classification for biomedical studies, each new observation, ${\displaystyle y_{0}}$, is compared to the target class, ${\displaystyle C}$, and identified as an outlier or a member of the target class.[23]

See also

• Multiclass classification
• Anomaly detection
• Supervised learning

References

1. Oliveri P (August 2017). "Class-modelling in food analytical chemistry: Development, sampling, optimisation and validation issues - A tutorial". Analytica Chimica Acta. 982: 9–19. doi:10.1016/j.aca.2017.05.013. PMID 28734370.
2. Japkowicz N, Myers C, Gluck M (1995). "A Novelty Detection Approach to Classification". IJCAI-95. CiteSeerX 10.1.1.40.3663.
3. Japkowicz N (1999). Concept-Learning in the Absence of Counter-Examples:An Autoassociation-Based Approach to Classification (Thesis). Rutgers University.
4. Japkowicz N (2001). "Supervised Versus Unsupervised Binary-Learning by Feedforward Neural Networks" (PDF). Machine Learning. 42: 97–122. doi:10.1023/A:1007660820062.
5. Petsche T, Marcantonio A, Darken C, Hanson S, Kuhn G, Santoso I (1996). "A Neural Network Autoassociator for Induction Motor Failure Prediction" (PDF). NIPS.
6. Tax D (2001). One-class classification: Concept-learning in the absence of counter-examples (PDF) (Ph.D. thesis). The Netherlands: University of Delft.
7. Crammer, Koby (2004). "A needle in a haystack: local one-class optimization". ICML Proceedings of the Twenty-first International Conference on Machine Learning: 26. doi:10.1145/1015330.1015399.
8. Moya, M.; Hush, D. (1996). "Network constraints and multi- objective optimization for one-class classification". Neural Networks. 9 (3): 463–474. doi:10.1016/0893-6080(95)00120-4.
9. Rodionova OY, Oliveri P, Pomerantsev AL (2016-12-15). "Rigorous and compliant approaches to one-class classification". Chemometrics and Intelligent Laboratory Systems. 159: 89–96. doi:10.1016/j.chemolab.2016.10.002.
10. Zineb, Noumir; Honeine, Paul; Richard, Cedue (2012). "On simple one-class classification methods". IEEE International Symposium on Information Theory Proceedings. IEEE, 2012.
11. Khan, Shehroz S.; Madden, Michael G. (2010). Coyle, Lorcan; Freyne, Jill (eds.). "A Survey of Recent Trends in One Class Classification". Artificial Intelligence and Cognitive Science. Lecture Notes in Computer Science. Springer Berlin Heidelberg. 6206: 188–197. doi:10.1007/978-3-642-17080-5_21. hdl:10379/1472. ISBN 9783642170805.
12. Liu, Bing (2007). Web Data Mining. Springer. pp. 165–178.
13. Bing Liu; Wee Sun Lee; Philip S. Yu & Xiao-Li Li (2002). Partially supervised classification of text documents. ICML. pp. 8–12.
14. Hwanjo Yu; Jiawei Han; Kevin Chen-Chuan Chang (2002). PEBL: positive example based learning for web page classification using SVM. ACM SIGKDD.
15. Xiao-Li Li & Bing Liu (2003). Learning to classify text using positive and unlabeled data. IJCAI.
16. Minh Nhut Nguyen; Xiao-Li Li & See-Kiong Ng (2011). Positive Unlabeled Learning for Time Series Classification. IJCAI.
17. Peng Yang; Xiao-Li Li; Jian-Ping Mei; Chee-Keong Kwoh & See-Kiong Ng (2012). Positive-Unlabeled Learning for Disease Gene Identification. Bioinformatics, Vol 28(20).
18. Li, W.; Guo, Q.; Elkan, C. (February 2011). "A Positive and Unlabeled Learning Algorithm for One-Class Classification of Remote-Sensing Data". IEEE Transactions on Geoscience and Remote Sensing. 49 (2): 717–725. Bibcode:2011ITGRS..49..717L. doi:10.1109/TGRS.2010.2058578. ISSN 0196-2892.
19. Bishop, Christopher M.; Bishop, Professor of Neural Computing Christopher M. (1995-11-23). Neural Networks for Pattern Recognition. Clarendon Press. ISBN 9780198538646.
20. R, Ullman Neil (2017-01-01). "Elementary statistics". Cite journal requires |journal= (help)
21. "Introduction to Applied Mathematics". SIAM Bookstore. Retrieved 2019-04-29.
22. Ypma, Alexander; Duin, Robert P. W. (1998). Niklasson, Lars; Bodén, Mikael; Ziemke, Tom (eds.). "Support objects for domain approximation". Icann 98. Perspectives in Neural Computing. Springer London: 719–724. doi:10.1007/978-1-4471-1599-1_110. ISBN 9781447115991.
23. Irigoien I, Sierra B, Arenas C (2014). "Towards application of one-class classification methods to medical data". TheScientificWorldJournal. 2014: 730712. doi:10.1155/2014/730712. PMC 3980920. PMID 24778600.
24. Irigoien I, Arenas C (July 2008). "INCA: new statistic for estimating the number of clusters and identifying atypical units". Statistics in Medicine. 27 (15): 2948–73. doi:10.1002/sim.3143. PMID 18050154.