Old US 41–Backwater Creek Bridge

The Old US 41–Backwater Creek Bridge is a bridge located on an abandoned section of US Highway 41 (US 41) over Backwater Creek in Baraga Township, Michigan. It was listed on the National Register of Historic Places in 1999.[1]

US-41 (old)–Backwater Creek Bridge
LocationAbandoned US 41 over Backwater Creek, Baraga Township, Michigan
Coordinates46°45′16″N 88°29′41″W
Arealess than 1 acre (0.40 ha)
Built1918
Built bySmith-Sparks Construction Company, Northwestern Bridge and Iron Co.
ArchitectMichigan State Highway Dept.
Architectural styleWarren pony truss
MPSHighway Bridges of Michigan MPS
NRHP reference No.99001508[1]
Added to NRHPDecember 9, 1999

History

In 1913, the state of Michigan authorized the construction of trunkline roads through the state.[2] A main trunkline route through Baraga County was designated, extending from Michigamme to Chassell. By 1915, the trunkline had been completed, and the Baraga County Road Commission spent the remainder of the decade slowly improving the route, regrading segments and replacing some bridges.[2]

One of the improvements along the route was the construction of a bridge across the end of Keweenaw Bay, two miles (3.2 km) south of Baraga.[2] The Michigan State Highway Department designed a long-span pony truss bridge for the crossing, designated State Trunk Line Bridge No. 86. In 1917, the department awarded contracts for the construction of the bridge: Smith-Sparks Construction Company was awarded $5,414.20 to fabricate the concrete substructure, and the Northwestern Bridge and Iron Company fabricated and installed the truss for $4,536.00. The structure was completed in 1918.[2]

In 1926, the trunkline road was incorporated into US 41. Traffic along the route increased, and eventually a replacement bridge was built nearby.[2] The original bridge remains, in essentially unaltered condition, and is now a privately owned structure.[2]

Description

The Old US 41–Backwater Creek Bridge is a rigidly connected Warren pony truss, 80 feet (24 m) long with an 18-foot-wide (5.5 m) roadway. The deck is constructed of I-beams bolted to the verticals and support stringers, over which a concrete roadway is laid. The trusses are supported by concrete abutments on all four corners, having angled wingwalls.[2]

The bridge is historically important as an early part of the region's infrastructure, and is technologically noteworthy as one of the earliest examples of a standard highway department pony truss design in the state.[2]

gollark: Who is going around using 1000000-element fixed length arrays and not expecting this exactly?
gollark: I see.
gollark: tio!debug
gollark: ```cint[5] five_ints() { int ints[5] = {1, 2, 3, 4, 5}; return ints;}int main() { int ints[5] = five_ints(); printf("%d", ints[0]);}```
gollark: My WiFi connection is *particularly* filled with bees today, wow.

See also

References
  1. "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010. Retrieved December 5, 2011.
  2. Staff. "US  41 (old)–Backwater Creek Bridge". Historic Sites Online. Michigan State Housing Development Authority. Retrieved December 5, 2011.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.