Northeastern Bible College

Northeastern Bible College was founded by Charles W. Anderson and first opened in September 1950 as Northeastern Bible Institute, at the Brookdale Baptist Church in Bloomfield, New Jersey. The college relocated to a campus in Essex Fells in the fall of 1952. The name was changed in 1964 to Northeastern Collegiate Bible Institute, and finally in 1973 to Northeastern Bible College.

Northeastern Bible College
Whittle Hall (circa 1980)
General information
Town or cityEssex Fells, NJ 07021
CountryUnited States

Northeastern won the 1st official NCCAA D-I Soccer Championship in the Fall 1973 and in the spring of 1974, was granted full accreditation by the Middle States Association of Colleges and Schools. The school closed in 1990 because of financial difficulties and low enrollment, but the board of trustees was required by its by-laws to give the institution's assets to a like-minded organization before it could disband. The college library, containing 27,000 volumes of Bible and theology resources, was later acquired by The Master's University in Santa Clarita, California, in 1990.[1] The King's College, which had closed its Briarcliff Manor, NY campus in 1994 because of its own financial difficulties, was revived in 1998 and received Northeastern's monetary assets in 1999. This allowed King's to lease two floors in the Empire State Building, where it operated until relocating to Lower Manhattan, near Wall Street, in 2012. Northeastern Bible College served over 4,000 students, and 70% of its alumni are engaged in full-time Christian service.

School presidents
  • Charles W. Anderson, 1950-1980
  • J. Gordon Henry, 1980-1984
  • Robert Benton, 1984-1987
  • James Bjornstad, 1987-1990

Alumni and Transcript Information

Alumni and transcript information is available from The King's College in New York, NY.

gollark: I think this is technically possible to implement, so bee⁻¹ you.
gollark: This is underspecified because bee² you, yes.
gollark: All numbers are two's complement because bee you.
gollark: The rest of the instruction consists of variable-width (for fun) target specifiers. The first N target specifiers in an operation are used as destinations and the remaining ones as sources. N varies per opcode. They can be of the form `000DDD` (pop/push from/to stack index DDD), `001EEE` (peek stack index EEE if source, if destination then push onto EEE if it is empty), `010FFFFFFFF` (8-bit immediate value FFFFFFFF; writes are discarded), `011GGGGGGGGGGGGGGGG` (16-bit immediate value GGGGGGGGGGGGGGGG; writes are also discarded), `100[H 31 times]` (31-bit immediate because bee you), `101IIIIIIIIIIIIIIII` (16 bits of memory location relative to the base memory address register of the stack the operation is conditional on), `110JJJJJJJJJJJJJJJJ` (16 bit memory location relative to the top value on that stack instead), `1111LLLMMM` (memory address equal to base memory address of stack LLL plus top of stack MMM), or `1110NNN` (base memory address register of stack MMM).Opcodes (numbered from 0 in order): MOV (1 source, as many destinations as can be parsed validly; the value is copied to all of them), ADD (1 destination, multiple sources), JMP (1 source), NOT (same as MOV), WR (write to output port; multiple sources, first is port number), RE (read from input port; one source for port number, multiple destinations), SUB, AND, OR, XOR, SHR, SHL (bitwise operations), MUL, ROR, ROL, NOP, MUL2 (multiplication with two outputs).
gollark: osmarksISA™️-2028 is a VLIW stack machine. Specifically, it executes a 384-bit instruction composed of 8 48-bit operations in parallel. There are 8 stacks, for safety. Each stack also has an associated base memory address register, which is used in some "addressing modes". Each stack holds 64-bit integers; popping/peeking an empty stack simply returns 0, and the stacks can hold at most 32 items. Exceeding a stack's capacity is runtime undefined behaviour. The operation encoding is: `AABBBCCCCCCCCC`:A = 2-bit conditional operation mode - 0 is "run unconditionally", 1 is "run if top value on stack is 0", 2 is "run if not 0", 3 is "run if first bit is ~~negative~~ 1".B = 3-bit index for the stack to use for the conditional.C = 9-bit opcode (for extensibility).

References
  1. http://www.masters.edu/campuslinks/library/about/


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.