Nickel aluminide

Nickel aluminide (Ni₃Al) is an intermetallic alloy of nickel and aluminium with properties similar to both a ceramic and a metal.

There are three materials called nickel aluminide:

NiAl, CAS number 12003-78-0 (see also Raney nickel)
NiAl₃, CAS number 12004-71-6
Ni₃Al, tri-nickel aluminide

Nickel aluminide is used as a strengthening constituent in high-temperature nickel-base superalloys, however, unalloyed nickel aluminide has a tendency to exhibit brittle fracture and low ductility at ambient temperatures.[1] Nickel aluminide is unique in that it has very high thermal conductivity combined with high strength at high temperature. These properties, combined with its high strength and low density, make it ideal for special applications like coating blades in gas turbines and jet engines.

In 2005, the most abrasion-resistant material was reportedly created by embedding diamonds in a matrix of nickel aluminide.[2]

IC-221M

An alloy of Ni₃Al, known as IC-221M, is made up of nickel aluminide combined with several other metals including chromium, molybdenum, zirconium and boron. Adding boron increases the ductility of the alloy by positively altering the grain boundary chemistry and promoting grain refinement. The Hall-Petch parameters for this material were σ_o = 163 MPa and k_y = 8.2 MPaˑcm^1/2.[3] Boron increases the hardness of bulk Ni₃Al by a similar mechanism.

This alloy is extremely strong for its weight, five times stronger than common SAE 304 stainless steel. Unlike most alloys, IC-221M increases in strength from room temperature up to 800 °C.

.

The alloy is very resistant to heat and corrosion, and finds use in heat-treating furnaces and other applications where its longer lifespan and reduced corrosion give it an advantage over stainless steel.[4]

Properties

Ni₃Al has a cubic crystalline structure of the L1₂ type, with lattice parameter a = 355.9 pm.
Density = 7.16 g/cm³
Yield Strength = 855 MPa
Hardness = HRC 12
Thermal Conductivity Ni₃Al = 28.85 (W/m.K)[5]
Thermal Conductivity NiAl = 76 (W/m.K) [5]
Melting Point Ni₃Al = 1668 K
Melting Point NiAl = 1955 K
Thermal expansion coefficient = 12.5 (10⁻⁶/K⁻¹)
Bonding = covalent/metallic
Electrical resistivity = 32.59 (10⁻⁸Ωm)

References

"ASM Specialty Handbook: Nickel, Cobalt, and Their Alloys", p. 104
Scientists Develop Nickel Aluminide Composite Material that Can Cut Through Cast Iron and Granite
Liu, C. T.; White, C. L.; Horton, J. A. (1985). "Effect of boron on grain-boundaries in Ni₃Al". Acta Metall. 33 (2): 213–229. doi:10.1016/0001-6160(85)90139-7.
Crawford, Gerald (April 2003). "Exotic Alloy Finds Niche". Nickel magazine. Retrieved 2006-12-19.
Dey, G. K. (2003). "Physical Metallurgy of Nickel Aluminides" (PDF). Sadhana. 28 (Parts 1 & 2): 247–262. doi:10.1007/bf02717135. Retrieved 2014-03-05.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] "ASM Specialty Handbook: Nickel, Cobalt, and Their Alloys", p. 104

[2] Scientists Develop Nickel Aluminide Composite Material that Can Cut Through Cast Iron and Granite

[3] Liu, C. T.; White, C. L.; Horton, J. A. (1985). "Effect of boron on grain-boundaries in Ni₃Al". Acta Metall. 33 (2): 213–229. doi:10.1016/0001-6160(85)90139-7.

[4] Crawford, Gerald (April 2003). "Exotic Alloy Finds Niche". Nickel magazine. Retrieved 2006-12-19.

[Dey-2003-5] Dey, G. K. (2003). "Physical Metallurgy of Nickel Aluminides" (PDF). Sadhana. 28 (Parts 1 & 2): 247–262. doi:10.1007/bf02717135. Retrieved 2014-03-05.