Mokai Tramway

The Mokai Tramway was constructed by the Taupo Totara Timber Company (TTT Co) to link their milling centre at Mokai with the New Zealand Government Railways line (NZR) at Putāruru in the Waikato region on the North Island of New Zealand. The more than 82 kilometres (51 mi) long light railway line was operated from 1903 to 1944 by the Taupo Totara Timber Company Tramway. It was handed over to NZR on 12 June 1950, and the section from Putāruru to Kinleith Mill south of Tokoroa is still being used for goods transport as of 2018.

Mokai Tramway
Railway line of the Taupo Totara Timber Company showing "the corkscrew", with five different levels[1]
Technical
Track gauge3 ft 6 in (1067 mm)
Route map
km
from Hamilton (NZR)
to Rotorua (NZR)
0,0 former transfer to the NZR network
Taupo Totara Timber Co. in Putāruru
Tokoroa
29,0 Kinleith Mill
Waikato River
The Spiral or
The Corkscrew
82,0 Taupo Totara Timber Co. in Mokai
Wooden tracks into the bush
Fan like network in the bush

History

The 82 kilometres (51 mi) long line was built in 1903 over the former Lichfield Branch line, which was originally built by the Thames Valley and Rotorua Railway Company to be part of the line to Rotorua. The TTT Co line then went onwards south of Lichfield through what is now Tokoroa and Kinleith and crossed the Waikato River at Ongaroto.

The longest single span wooden bridge in New Zealand over the Waikato River at Ongaroto[1]

At Ongaroto the company built a large timber bridge of locally sourced totara, designed by Public Works Department engineer Frederick Furkert. In later years this timber bridge deteriorated and was condemned, but the company could not afford to replace it immediately because its sawmill had burned down in 1928. In the last few years of service, trains arriving at the bridge would stop and the passengers and fireman would walk across while the driver gently opened the throttle and then jumped off. The train would slowly ease across the bridge before being stopped on the other side by the fireman, where everyone would reboard the train. This bridge was replaced in 1931 by a steel truss bridge with a central pier.[2]

Taupo Totara Timber Company sawmill at Mokai[1]

In general the TTT Co line was constructed to a fairly high standard for a bush tramway, with 1 in 30 grades and 30 metre radius curves. This reflected the company's ultimate intention to sell the line to NZR. In 1911 the TTT Co put forward a proposal to extend their line from Mokai into Taupo township via Oruanui. However, considerable objection was made to this proposal by the people of Rotorua.[3] The Taupo District Railway League consequently lodged a complaint to the Member of Parliament for the district, William MacDonald, protesting the opposition being made by the Rotorua Chamber of Commerce. As time passed the proposal for the TTT Co scheme was eventually shelved.

The TTT Co line eventually closed on 26 October 1944. However the Government saw that the line had greater potential and in September 1946 acquired the first 29 km between Putāruru and Kinleith. This section of line opened again on 9 June 1947 under the control of the Public Works Department using steam locomotives purchased from the TTT Co.[4]

Around the same time plans were being made for a large pulp and paper mill to be constructed at Kinleith. The line with its sharp curves, steep grades and light rails, needed to be significantly upgraded to enable heavy traffic. Reconstruction of the line began in 1949, reducing grades from 1 in 44 to 1 in 70 and curves from 201 metre radius to 322 metre radius. The rebuilt line was handed over to NZR on 12 June 1950.[5]

The section from Putāruru to Kinleith Mill south of Tokoroa is still(2018) being used as part of the Kinleith Branch Line for goods transport.

Rolling stock

Locomotives

ALCO Mallett steam locomotive No 7[1]
TTT Co maintenance trolley[1]
TTTCo NumberMakerMaker's NumberYearType
1Stearns Manufacturing Co10741903Geared (Heisler)
2Stearns10821903Geared (Heisler)
3Yorkshire Engine Company2551875Conventional
4 (ex NZR A71)Dubs & Co6541873Conventional
5Climax?1903Climax Type A
6Barclay12701912Conventional
7ALCO539701912Mallet Locomotive
8Heisler14481921Geared (Heisler)
9Heisler14491921Geared (Heisler)
10A & G Price?1937Geared[6]

Wagons

  • 1 combination car for goods and passenger transport
  • 1 guard van
  • 25 flat wagon with side stakes[7]
gollark: That doesn't sound like a very actionable sort of thing to do.
gollark: * developed, sorry
gollark: IIRC right now developing countries have the slowest-growing or in some cases even declining populations.
gollark: Birth rates tend to go lower in more developed countries, and it's possible to use resources/land/whatever more efficiently as technology advances.
gollark: It's probably fine, as long as technology keeps improving.

References

  1. Alexander Turnbull Library, Wellington, New Zealand
  2. "Ongaroto Bridge". www.ipenz.org.nz. IPENZ Engineering Heritage. Archived from the original on 2017-04-07. Retrieved 2016-09-25.
  3. "A Light Railway". The Evening Post. 1912-09-10. p. 7. Retrieved 2016-06-24.
  4. Churchman & Hurst 2001, p. 118.
  5. Churchman & Hurst 2001, p. 119.
  6. Cudby, Kevin. Men of Pluck. p. 56. ISBN 0-473-07505-9.
  7. David Kinzett: Taupo Totara Timber Co. Archived 2018-11-29 at the Wayback Machine 9 February 2000. Retrieved on 9 May 2018.

Bibliography

  • Churchman, Geoffrey B; Hurst, Tony (2001) [1990, 1991]. The Railways of New Zealand: A Journey through History (Second ed.). Transpress New Zealand. ISBN 0-908876-20-3.

See also

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.