Mohammad Ali Mardani
Mohammad Ali Mardani (Persian: محمد علیمردانی) is an Iranian football forward who currently plays for Iranian football club Padideh in the Persian Gulf Pro League.
| Personal information | |||
|---|---|---|---|
| Full name | Mohammad Ali Mardani | ||
| Date of birth | August 26, 1994 | ||
| Place of birth | Masjed Soleyman, Iran | ||
| Playing position(s) | Forward | ||
| Club information | |||
Current team | Padideh | ||
| Number | 11 | ||
| Youth career | |||
| –2015 | Fajr Sepasi | ||
| Senior career* | |||
| Years | Team | Apps | (Gls) |
| 2014–2015 | Fajr Sepasi | 6 | (0) |
| 2015– | Padideh | 21 | (4) |
| National team‡ | |||
| 2014–2016 | Iran U23 | 1 | (0) |
|
* Senior club appearances and goals counted for the domestic league only and correct as of 21 September 2016 ‡ National team caps and goals correct as of 21 September 2016 | |||
Club career
Padideh
He joined Padideh in summer 2015 with two-years contract. He made his debut for Padideh in 2015–16 Iran Pro League against Saba Qom as substitute for Younes Shakeri.[1] icipating in the 2014 AFC U-19 Championship.
Club career statistics
- As of 17 December 2015.
| Club | Division | Season | League | Hazfi Cup | Asia | Total | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Apps | Goals | Apps | Goals | Apps | Goals | Apps | Goals | |||
| Fajr Sepasi | Division 1 | 2014–15 | 6 | 0 | 3 | 2 | – | – | 9 | 2 |
| Padideh | Pro League | 2015–16 | 7 | 1 | 2 | 0 | – | – | 9 | 1 |
| Career Totals | 13 | 1 | 5 | 2 | 0 | 0 | 18 | 3 | ||
gollark: The reason they *do* is probably just consistency with other methods (it would be very annoying if they worked very differently to GET routing-wise) and so requests can be routed to the right handler more easily.
gollark: <@498244879894315027> Why wouldn't (shouldn't?) they have a URL?
gollark: They do have to spin pretty fast. There are sealed helium ones now.
gollark: > The HDD's spindle system relies on air density inside the disk enclosure to support the heads at their proper flying height while the disk rotates. HDDs require a certain range of air densities to operate properly. The connection to the external environment and density occurs through a small hole in the enclosure (about 0.5 mm in breadth), usually with a filter on the inside (the breather filter).[124] If the air density is too low, then there is not enough lift for the flying head, so the head gets too close to the disk, and there is a risk of head crashes and data loss. Specially manufactured sealed and pressurized disks are needed for reliable high-altitude operation, above about 3,000 m (9,800 ft).[125] Modern disks include temperature sensors and adjust their operation to the operating environment. Breather holes can be seen on all disk drives – they usually have a sticker next to them, warning the user not to cover the holes. The air inside the operating drive is constantly moving too, being swept in motion by friction with the spinning platters. This air passes through an internal recirculation (or "recirc") filter to remove any leftover contaminants from manufacture, any particles or chemicals that may have somehow entered the enclosure, and any particles or outgassing generated internally in normal operation. Very high humidity present for extended periods of time can corrode the heads and platters. https://en.wikipedia.org/wiki/Hard_disk_drive#Integrity
gollark: Interweb says it's to keep pressure equalized between the inside and out.
References
- "لیگ برتر : صباي قم - پدیده خراسان". iranleague.ir. Retrieved 2015-12-17.
External links
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.