Microjet 200

The Microjet 200 was a French jet trainer designed and built by Microjet SA.

Microjet 200
Microjet 200 prototype at Farnborough Airshow in 1982.
Role Lightweight jet trainer
National origin France
Manufacturer Microjet SA
First flight 24 June 1980
Number built 4

Design and development

Designed by Microjet SA, as a vehicle for the small gas turbine engines produced by Microturbo and as a two-seat lightweight jet trainer. The 200 is a low-wing cantilever monoplane with a retractable tricycle landing gear and a v-tail. It is powered by two Microturbo TRS 18-1 turbojets. It had side-by-side seating for an instructor and student. The all-wood prototype 200 first flew on 24 June 1980. Three pre-production aircraft designated 200B were built of mixed construction and the first flew on 19 May 1983. The third had small winglets on the tail. The project failed to gain any interest and no production aircraft were built.

Variants

200
Prototype, one built.
200B
Pre-production, three built.[1]

Specifications (200B)

Data from Jane's All The World's Aircraft 1988-89 [1]

General characteristics

  • Crew: 2
  • Length: 6.67 m (21 ft 10.5 in)
  • Wingspan: 7.56 m (24 ft 9.75 in)
  • Height: 2.42 m (7 ft 11.25 in)
  • Wing area: 6.12 m2 (65.9 sq ft)
  • Empty weight: 780 kg (1,719 lb)
  • Gross weight: 1,300 kg (2,866 lb)
  • Powerplant: 2 × Microturbo TRS 18-1 turbojet engines , 1.30 kN (293 lbf) thrust each

Performance

  • Maximum speed: 463 km/h (287 mph, 249 kn)
  • Cruise speed: 389 km/h (241 mph, 209 kn)
  • Endurance: 2 hours
  • Service ceiling: 9,150 m (30,000 ft)
  • Rate of climb: 8.7 m/s (1,705 ft/min)

References

  1. John W.R. Taylor, ed. (1988). Jane's All the World's Aircraft 1988-89. London: Jane's Information Group. pp. 77–78. ISBN 0-7106-0867-5.

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.