Matadi–Kinshasa Railway

The Matadi–Kinshasa Railway is a railway line in Kongo Central province between the port of Matadi and Kinshasa, the capital of Democratic Republic of the Congo.

Matadi train station, September 2015

The Matadi–Kinshasa Railway was built from 1890 to 1898 in order to circumvent the series of rapids and falls which hindered access from the South Atlantic Ocean to the Congo Basin.[1] Its length is 366 km (227 mi) and it is run by ONATRA. The line reopened in September 2015 after around a decade without regular service. As of April, 2016 there was one passenger trip per week along the line and more frequent service was planned.[2]

History
The first locomotive arriving at Léopoldville in 1898
The line in 1913 (with also the first section of the Mayumbe Railway in the North)
The new track as it could be seen on 25 July 1927 (engineer's map).

In the 1880s the exploration and exploitation of the Congo territory was carried out by the Congo Free State, which benefitted from hydrographic network of the Congo River. But between Matadi and Kinshasa (formerly known as Léopoldville), the river was not navigable, being barred by the Livingstone Falls, which follow one another for 300 km (190 mi). Transport was done by human bearers, which was not very efficient and often fatal. Therefore, it was decided to build a railway line along this route.

The Compagnie du Congo pour le Commerce et l'Industrie (CCCI) was founded on 31 July 1887. On the same day the Compagnie du Chemin de Fer du Congo (CCFC) was created. Work on the railway was directed by Albert Thys, who would give his name to one of the stations, Thysville (now Mbanza-Ngungu). The completion of the railway cost the lives of 1,932 people (1,800 Africans and 132 Europeans), additionally up to 60,000 labourers worked on the project at one time.[3]

The main difficulty was to make it possible for the railway line to leave the gorges of the Congo River, through the canyon the M'pozo River and a passage along the Monts de Cristal.

The hard labour on the railway line is mentioned by Joseph Conrad in his novel Heart of Darkness, which he witnessed when he worked in the Congo Free State. It is also shown in the 2016 movie The Legend of Tarzan.

Started in 1890, the railway line was completed in 1898. It was built to a nominal gauge of 750 mm (2 ft 5 1⁄2 in), and all rolling stock was constructed to this gauge. However, as local labour had difficulty grasping the concept of gauge widening on curves, the entire line was built to a gauge of 765 mm (2 ft 6 1⁄8 in).[4][5] Alterations were made from 1923 to 1931, when it was converted to 3 ft 6 in (1,067 mm) gauge on a new alignment. Several tens of thousands of people, convicts and forced workers, were employed for this renovation. 7,000 people lost their lives here.

In spite of the technical and financial difficulties related to the construction of the railway line, the railway line very quickly proved to be profitable, mainly because of the transportation of ivory and rubber. As a 750 mm (2 ft 5 1⁄2 in) gauge railway it operated a large fleet of 0-6-0T, 0-6-2T, 2-6-2T locomotives before turning to 32 0-6-0+0-6-0 Garratts, and finally 5 - outside-framed 2-8-2 locomotives.

The railway can be classified as a portage railway.

Border change

In 1928, Congo (Belgium) and Angola (Portugal) did a land exchange to facilitate the new route of the railway to Congo-Kinshasa.[6]

Specifications
1898-1932 1932–present[7]
Route Original Deviation
Gauge 750 mm (2 ft 5 1⁄2 in) 1,067 mm (3 ft 6 in)
Rails 21.5 kg/m (43.3 lb/yd) 33.4 kg/m (67.3 lb/yd)
Axle load 10 t (11 short tons; 10 long tons) 15 t (17 short tons; 15 long tons)
Length 401 km (249 mi) 365 km (227 mi)[8]
Rise max. 45‰ (4.5%) 17‰ (1.7%)
Radius min. 55 yd (50.3 m) 273 yd (249.6 m)

Main stations
Matadi–Kinshasa Railway
365
 Kinshasa East (307 m)
 to Kinshasa West
 N'Dolo
 Limete Amicongo
 Limete
 Limete UZAM (Kingabwa)
 to Ndjili Airport
 Matete
 Rifflart
 Kilembo
338
 Kimwenza (330 m)
 Block 329
321
 Kasangulu (400 m)
 Vindevoghel
 Bailleux
 Wolter
277
 Sona Bata (531 m)
266
 Madima (532 m)
 Nguvu
247
 Kisantu–Inkisi (520 m)
 Block 236
225
0
 Marchal (580 m)
16
 Mbanza-Ngungu (Thysville) (741 m)
216
 Kiasi-Pass (669 m)
 Kiasi
198
 Dethieu (454 m)
194
 Kolo (439 m)
187
 Cattier (420 m)
176
 Moerbeke (400 m)
 Tumba
154
 Lukala (390 m)
143
 Kimpese (333 m)
 Malanga
 Kwilu
 Block 110
 Block 100
93
 Songololo (320 m)
 Cipello
74
 Lufu (315 m)
 Monolithe
 Fornasari
38
 Kenge (265 m)
 Tombagadio
 Bousin
8
 Mpozo (72 m)
(270 m)
0
 Matadi (28 m)
 to Matadi road-rail bridge
 Petrocongo
8
 Ango-Ango

Present day

The railway line and the port of Matadi are currently the main connection of Kinshasa with the external world. The renovation of the Road to Matadi, in beginning of the 2000s, however somewhat alleviated this situation.

The railway line is underexploited and dangerous.

2012

Angola is proposing to link its three isolated lines, and also to link with adjacent countries including the Matadi-Kinshasa line. By using the Matadi Bridge which used to a road-rail bridge, a connection to the Cabinda enclave is possible.[9]

2015

The line reopened in September 2015 after around a decade without regular service. As of April, 2016 there was one passenger trip per week along the line and more frequent service was planned.[2]

Accident

On November 26, 2003, a train ran off the line and was damaged in the river, officially causing 10 deaths. There remain currently eight locomotives in operating state.

gollark: Bees wouldn't do this, though. Bees are incorruptible. Bees don't care if a lobbyist gives them money.
gollark: I vote that all politics be replaced with bees.
gollark: Also, it could still be hackerized a bit.
gollark: Well, I could do that, but I would have to mirror literally every user interaction (or at least quite a lot of them) to simulated pages on the server.
gollark: It's unpossible.

See also

References
  1. Headrick, Daniel R. (1981). The tools of empire : technology and European imperialism in the nineteenth century. Oxford University Press. pp. 196–197. ISBN 0-19-502831-7. OCLC 905456588.
  2. "Plus de 13 000 passagers transportés par train entre Kinshasa et Matadi" (in French). Radio Okapi. 10 April 2016. Retrieved 16 April 2017.
  3. Headrick, Daniel R. (1981). The tools of empire : technology and European imperialism in the nineteenth century. Oxford University Press. p. 198. ISBN 0-19-502831-7. OCLC 905456588.
  4. Neil Robinson: World Rail Atlas and Historical Summary 7. North, East and Central Africa. 2009.
  5. Durrant, A.E., A.A. Jorgensen, C.P. Lewis. Steam in Africa, London, 1981, Hamlyn.
  6. [Railways Africa 2014 issue 5, p29]
  7. Blanchart Charles: Le Rail au Congo Belge (2 tomes). Bruxelles: Blanchart, 1993/1999.
  8. 246 mi (396 km) including the branches to Ango-Ango and Mbanza-Ngungu (Thysville)
  9. Railway Gazette International September 2012, p42

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.