List of railroad truck parts

A bogie or railroad truck holds the wheel sets of a rail vehicle.

A diagram of an American-style truck showing the names of its parts and showing the journal boxes to be integral parts of the side frame

Axlebox

An axle box, also known as a journal box in North America, is the mechanical subassembly on each end of the axles under a railway wagon, coach or locomotive; it contains bearings and thus transfers the wagon, coach or locomotive weight to the wheels and rails; the bearing design is typically oil-bathed plain bearings on older rolling stock, or roller bearings on newer rolling stock. [1]

Plain bearings are now illegal for interchange service in North America.[2][3][4] As early as 1908 axle boxes contained a set of long cylindrical rollers allowing the axle to rotate.[5][6] It was also used on steam locomotives such as the Victorian Railways A2 class, the LMS Garratt, the LSWR 415 class, and the GCR Class 1.[5]

Center pin

A large steel pin—or rod—which passes through the center plates on the body bolster and truck bolster.[7] The truck turns about the pin, and stress is taken by the center plates.[7]

Center plate

One of a pair of plates which fit one into the other and support the car body on the trucks allowing them to turn freely under the car.[7] The one on the truck may also be called center bowl.[8]

Truck side frame

The frame at either side of the truck.[3][4]

Truck bolster

Each truck has a bolster—a transverse floating beam—between the side frames.[9] It is the central part of every truck on which the underframe of the railcar or railroad car is pivoted through the center pivot pin.[7][9]

Side bearing

There is one side bearing located on each side of the centerplate on the truck bolster.

gollark: Don't worry; the new challenge will be available by 2003.
gollark: Also your ternary data.
gollark: Now the round is over, I should probably publish osmarksTTT™ on my website.
gollark: But are you LyricLy?
gollark: Yes, it is.

See also

References

  1. "Railroad Dictionary: J". CSX.com. CSX Corporation. 2012. Archived from the original on 29 July 2014. Retrieved 15 November 2014.
  2. Car and Locomotive Cyclopedia 1969
  3. [httnoqp://www.columbuscastings.com/bolster_frames.html "AAR M-1003 Certified Truck Component Manufacturing"]. ColumbusCastings.com. Columbus, Ohio: Columbus Castings. Retrieved 19 November 2014.
  4. "General Information" (PDF). SCTCO.com. Standard Car Truck Company. January 2000. Archived from the original (PDF) on 4 March 2016. Retrieved 19 November 2014. |section= ignored (help)
  5. "The Evolution of Railway Axlebox Technology". Evolution. SKF. 7 December 2010. Retrieved 18 September 2014.
  6. "Glossary: A". Railway-Technical.com. Railway Technical Web Pages. 2014. Archived from the original on 7 October 2014. Retrieved 19 November 2014.
  7. "Railroad Dictionary: C". CSX.com. CSX Corporation. 2012. Archived from the original on 1 April 2015. Retrieved 15 November 2014.
  8. "APTA PR-CS-RP-003-98 Recommended Practice for Developing a Clearance Diagram for Passenger Equipment" (PDF). APTA.com. American Public Transportation Association. 26 March 1998. Archived from the original (PDF) on 26 June 2015. Retrieved 17 January 2015.
  9. "Railroad Dictionary: B". CSX.com. CSX Corporation. 2012. Archived from the original on 29 July 2014. Retrieved 15 November 2014.

Further reading


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.