Kenyon Bridge

The Kenyon Bridge, also known as the Blacksmith Shop Bridge, is a historic covered bridge spanning Mill Brook near Town House Road in Cornish, New Hampshire, United States. Built in 1882, it is one of New Hampshire's few surviving 19th-century covered bridges. It was listed on the National Register of Historic Places in 1978.[1]

Kenyon Bridge
LocationOff NH 12A at Mill Brook and Town House Rd., Cornish City, New Hampshire
Coordinates43°27′47″N 72°21′13″W
Area0.5 acres (0.20 ha)
Built1882 (1882)
ArchitectTasker, James
Architectural styleMultiple Kingpost Truss
NRHP reference No.78000223[1]
Added to NRHPMay 22, 1978

Description and history

The Kenyon Bridge is located in a wooded rural setting, a short way east of Town House Road about 0.3 miles (0.48 km) south of its junction with Center Road. It spans Mill Brook in a roughly east-west orientation. It is 96 feet (29 m) long and 14.5 feet (4.4 m) wide, with a roadbed 90 feet (27 m) long and 13 feet (4.0 m) wide. The bridge rests on dry-laid stone abutments. The bridge's multiple kingpost trusses are sheltered by a sheet metal roof, with vertical plank siding covering the lower 1/3 of the trusses. Each truss consists of 28 panel sections between 29 posts.[2]

The bridge was built in 1882 by James Frederick Tasker (1826–1903), a local builder well known for his bridges. Its historic name as the Blacksmith Shop Bridge derives from a shop nearby owned by blacksmith John Fellows.[2] It underwent a major rehabilitation in 1963. It is now closed to vehicular traffic, but open to pedestrians.

gollark: Nonsense, my assembly is perfect and without flaw?
gollark: `/usr/include/asm/unistd_64.h`
gollark: Check, what is it again, unistd.h?
gollark: Noted.
gollark: Wait, how did you make it highlight that?

See also

Images

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.